Simply Shade SS-LUNA User manual

Instruction Manual
www.simplyshade.com
©2022 SimplyShade - All Rights Reserved. 7/22
Luna
Umbrella Light with Bluetooth®Speaker
SS-LUNA

Thank you for purchasing SimplyShade’s Luna Umbrella Light.
Please remove all contents from the package, inspect and review checklist.
CAUTION: To reduce personal injury and damage to your umbrella light, read and
follow the instruction manual.
CHECKLIST
A - (1) Luna
B - (1) Power Supply*
A -
SAFETY PRECAUTIONS:
61
Unlock Button
LED Lights
Bluetooth Power Button
Bluetooth®and Charging
Indicator Light
LED Light Power Button
Charging Port
Back View
Speaker
B -
*Note: Use only the
Power Supply included
with Luna. See page 6 for
Safety Precautions.
!
• Position Luna in a location that will protect it from direct sunlight and moisture.
• Do not overcharge the battery. Unplug the power supply when the indicator light turns off.
Over charging may cause the battery to become hot, rupture or ignite. If you see any heat
deformation or leakage, properly dispose of the device.
• If unit is exposed to light moisture, allow unit to air dry for a minimum of 24 hours before reuse.
• Power supply must be used indoors only. It is neither designed nor tested for use outdoors.
WARNING: The Luna umbrella light is not waterproof. If Luna is immersed in water or exposed
to heavy rain the unit will be damaged and void the 1 year warranty.
NOTE: We recommend fully charging Luna before you store for extended periods of time.
Power Supply:
• Never use a third party battery or power supply. Doing so may increase risk of fire or
explosion. Contact your local authorized dealer for a replacement power supply.
• During prolonged use, it is normal for the power supply to be warm to the touch. When using
power supply, avoid direct sunlight and exposure to moisture.
• Do not attempt to charge the Luna in inclement weather (rain, snow) so as to prevent damage
to the electrical components.
!
Power Supply Information
Input voltage: 100-240Vac 50/60Hz
Output: 9VDC 1.2A
5’ Cord
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by SimplyShade is under
license. Other trademarks and trade names are those of their respective
owners.
WARRANTY:
The manufacturer warrants that this
umbrella, when subject to normal and
proper use, will be free from
manufacturing defects for a period of
one year from the original date of
purchase. Should any defect occur
during the specified time period, the
manufacturer will repair, replace, or
provide replacement parts, at its own
option. Warranty is not transferable.
We will not warrant any claim coverage
unless both the original sales receipt and
request form are sent to us. Any items
that are returned for warranty or non
warranty purposes must be issued a
Return Authorization Number. Only
upon issuance of an RA # and inspection
by our QC department will credit or
replacement of umbrella be issued. It is
the customer’s responsibility to pay the
freight on return products or
replacement parts. ALL RETURNED
ITEMS MUST INCLUDE THE RA#
CLEARLY WRITTEN ON THE
RETURN PACKAGE or package will be
refused by our warehouse personnel.
NOTE: Damages and failure caused by
improper use due to neglect of reasonable
and necessary care are not covered by
this warranty.
Additionally, acts of nature (including but
not limited to wind, hurricanes, tornadoes,
and storms) are not covered by this
warranty.

Unlock Button
Bluetooth
Power Button
Bluetooth Light
• Connect the power supply to the Luna charging port, then plug the other end into any 110V
power source. Charge Luna for 2-4 hours. The Luna is fully charged when the Bluetooth
indicator light turns off.
Note:
• Charge Luna in dry area to keep from damaging.
• We recommend fully charging Luna before you store for extended periods of time.
• When the Luna battery is low, you will hear an indicator tone notifying you to charge the
Luna.
• To turn on Bluetooth, locate the Bluetooth power button on the Luna. Press and hold
Bluetooth power button for 3 seconds until you hear a prompt sound. The Bluetooth indicator
light will blink blue when in pairing mode.
• From your music device, turn on Bluetooth and switch your device to discovery mode. Select
“LUNA” from your device options. You will hear a set tone and the Bluetooth light will become
solid blue once the Luna and your music device are paired successfully.
• Use controls on music device to select songs from playlists and adjust volume.
Note:
• Sound quality will lessen or music will stop playing when music device is approximately
30 feet away from Luna.
• The Luna can be attached to umbrella center poles up to 2” and cantilever umbrella light
adapters.
• Open Luna by holding the device firmly with one hand and then press “unlock” button with the
other hand to release the clamp lock.
• Open up the Luna light and clasp around the mid pole or light adapter. Snap to close.
25
Center Pole Application
Cantilever Application
Pull down light adapter
STEP 1 Charging
STEP 2 Pairing Bluetooth Device
STEP 6 Attaching Luna to Umbrella

LED Light Power Button
• Only 1 music device can be connected at a time.
• To pair another device, first unpair the current device by disconnecting Bluetooth on device,
or pressing and holding the Bluetooth power button for 2 seconds. You will hear a tone when
the current music device unpairs and the Bluetooth light will begin blinking blue again.
Note:
• If you hold Bluetooth power button for 4 seconds, the device will shut off.
Bluetooth
Power Button
Bluetooth Light
• To turn off Luna, press and hold Bluetooth power button for 4 seconds. You will hear a
descending tone and the Bluetooth Indicator light will turn off.
Note:
• Luna will turn off automatically when Bluetooth is in pairing mode, or inactive for more than 15
minutes.
• When your music device is disconnected, you will hear a prompt sound from Luna.
• To turn on and off LED lights, press the LED light power button.
43
Bluetooth
Power Button
STEP 3 Unpairing Bluetooth Device
STEP 4 Turning Off Device
STEP 5 LED Lights

LED Light Power Button
• Only 1 music device can be connected at a time.
• To pair another device, first unpair the current device by disconnecting Bluetooth on device,
or pressing and holding the Bluetooth power button for 2 seconds. You will hear a tone when
the current music device unpairs and the Bluetooth light will begin blinking blue again.
Note:
• If you hold Bluetooth power button for 4 seconds, the device will shut off.
Bluetooth
Power Button
Bluetooth Light
• To turn off Luna, press and hold Bluetooth power button for 4 seconds. You will hear a
descending tone and the Bluetooth Indicator light will turn off.
Note:
• Luna will turn off automatically when Bluetooth is in pairing mode, or inactive for more than 15
minutes.
• When your music device is disconnected, you will hear a prompt sound from Luna.
• To turn on and off LED lights, press the LED light power button.
43
Bluetooth
Power Button
STEP 3 Unpairing Bluetooth Device
STEP 4 Turning Off Device
STEP 5 LED Lights

Unlock Button
Bluetooth
Power Button
Bluetooth Light
• Connect the power supply to the Luna charging port, then plug the other end into any 110V
power source. Charge Luna for 2-4 hours. The Luna is fully charged when the Bluetooth
indicator light turns off.
Note:
• Charge Luna in dry area to keep from damaging.
• We recommend fully charging Luna before you store for extended periods of time.
• When the Luna battery is low, you will hear an indicator tone notifying you to charge the
Luna.
• To turn on Bluetooth, locate the Bluetooth power button on the Luna. Press and hold
Bluetooth power button for 3 seconds until you hear a prompt sound. The Bluetooth indicator
light will blink blue when in pairing mode.
• From your music device, turn on Bluetooth and switch your device to discovery mode. Select
“LUNA” from your device options. You will hear a set tone and the Bluetooth light will become
solid blue once the Luna and your music device are paired successfully.
• Use controls on music device to select songs from playlists and adjust volume.
Note:
• Sound quality will lessen or music will stop playing when music device is approximately
30 feet away from Luna.
• The Luna can be attached to umbrella center poles up to 2” and cantilever umbrella light
adapters.
• Open Luna by holding the device firmly with one hand and then press “unlock” button with the
other hand to release the clamp lock.
• Open up the Luna light and clasp around the mid pole or light adapter. Snap to close.
25
Center Pole Application
Cantilever Application
Pull down light adapter
STEP 1 Charging
STEP 2 Pairing Bluetooth Device
STEP 6 Attaching Luna to Umbrella

Thank you for purchasing SimplyShade’s Luna Umbrella Light.
Please remove all contents from the package, inspect and review checklist.
CAUTION: To reduce personal injury and damage to your umbrella light, read and
follow the instruction manual.
CHECKLIST
A - (1) Luna
B - (1) Power Supply*
A -
SAFETY PRECAUTIONS:
61
Unlock Button
LED Lights
Bluetooth Power Button
Bluetooth®and Charging
Indicator Light
LED Light Power Button
Charging Port
Back View
Speaker
B -
*Note: Use only the
Power Supply included
with Luna. See page 6 for
Safety Precautions.
!
• Position Luna in a location that will protect it from direct sunlight and moisture.
• Do not overcharge the battery. Unplug the power supply when the indicator light turns off.
Over charging may cause the battery to become hot, rupture or ignite. If you see any heat
deformation or leakage, properly dispose of the device.
• If unit is exposed to light moisture, allow unit to air dry for a minimum of 24 hours before reuse.
• Power supply must be used indoors only. It is neither designed nor tested for use outdoors.
WARNING: The Luna umbrella light is not waterproof. If Luna is immersed in water or exposed
to heavy rain the unit will be damaged and void the 1 year warranty.
NOTE: We recommend fully charging Luna before you store for extended periods of time.
Power Supply:
• Never use a third party battery or power supply. Doing so may increase risk of fire or
explosion. Contact your local authorized dealer for a replacement power supply.
• During prolonged use, it is normal for the power supply to be warm to the touch. When using
power supply, avoid direct sunlight and exposure to moisture.
• Do not attempt to charge the Luna in inclement weather (rain, snow) so as to prevent damage
to the electrical components.
!
Power Supply Information
Input voltage: 100-240Vac 50/60Hz
Output: 9VDC 1.2A
5’ Cord
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by SimplyShade is under
license. Other trademarks and trade names are those of their respective
owners.
WARRANTY:
The manufacturer warrants that this
umbrella, when subject to normal and
proper use, will be free from
manufacturing defects for a period of
one year from the original date of
purchase. Should any defect occur
during the specified time period, the
manufacturer will repair, replace, or
provide replacement parts, at its own
option. Warranty is not transferable.
We will not warrant any claim coverage
unless both the original sales receipt and
request form are sent to us. Any items
that are returned for warranty or non
warranty purposes must be issued a
Return Authorization Number. Only
upon issuance of an RA # and inspection
by our QC department will credit or
replacement of umbrella be issued. It is
the customer’s responsibility to pay the
freight on return products or
replacement parts. ALL RETURNED
ITEMS MUST INCLUDE THE RA#
CLEARLY WRITTEN ON THE
RETURN PACKAGE or package will be
refused by our warehouse personnel.
NOTE: Damages and failure caused by
improper use due to neglect of reasonable
and necessary care are not covered by
this warranty.
Additionally, acts of nature (including but
not limited to wind, hurricanes, tornadoes,
and storms) are not covered by this
warranty.

Instruction Manual
www.simplyshade.com
©2022 SimplyShade - All Rights Reserved. 7/22
Luna
Umbrella Light with Bluetooth®Speaker
SS-LUNA