MX575A/B DGPS Compass
iii
Figure 1 – MX575 Mounting Orientations.................................................... 5
Figure 2– MX575 antenna location relative to other antennas ..................... 6
Figure 3 - MX575 with Fixed-Mount base ................................................... 7
Figure 4 - MX575 with Pole-Mount base ..................................................... 8
Figure 5– Fixed-Mount base ......................................................................... 9
Figure 6 - Bottom view of Fixed-Mount base............................................... 9
Figure 7- Running cable through the fixed base mount .............................. 10
Figure 8- Running cable through the fixed base ......................................... 10
Figure 9- Power/Data cable key and keyway.............................................. 11
Figure 10- Connecting the Power/Data cable to the MX575 ...................... 11
Figure 11- Fastening the fixed-base to the MX575..................................... 12
Figure 12- Fastening the fixed-base to the MX575..................................... 12
Figure 13- Threading on the lock nut and washer....................................... 14
Figure 14 - Running the cable through the pole base.................................. 15
Figure 15- Running the cable through the pole base................................... 15
Figure 16 - Running the Cable through the Pole Mount ............................. 16
Figure 17 - Completed cable run................................................................. 16
Figure 18 - Threading the Pole-Base onto the mount ................................. 17
Figure 19 – Pole-Base threaded onto mount ............................................... 17
Figure 20 - Power / Data cable key and keyway......................................... 18
Figure 21 - Connected Power / Data cable.................................................. 19
Figure 22 - Fastening the Pole Base to the MX575 .................................... 20
Figure 23 - Threading the lock nut against the pole base............................ 20
Figure 24- Locking the MX575 once aligned ............................................. 21
Figure 25 - Lining up the alignment sight................................................... 22
Figure 26 - Correctly Lined-up alignment sight.......................................... 22
Figure 27 –Standard connection to MX420 (Port 3) through Cable A ....... 26
Figure 28– Standard connection to MX420/2 (Port 3) through the junction
box............................................................................................................... 27
Figure 29–Standard connection to the MX420/8 (Port 3) through ............. 28
Figure 30 – Standard connection to MX500/MX510/MX512 ANT port
connection using a 3-meter antenna cable assembly................................... 29
