Simrad NSS12 EVO3S User manual

NSS evo3S
Quick Guide

| 3
NSS evo3S | Quick Guide - EN
NSS evo3S
Quick Guide
Front panel
A
K
E
B
G
CD
F
I
J
L
H
L M
ATouch Screen
BPages/Home key
•Press to open the Home page for page selection and setup options.
CWheel key user configurable key. Refer to the Operator manual.
Default without an autopilot connected to the system:
•Short press: toggles between panels on split screen.
•Long press: maximizes active panel on split screen.
Default with an autopilot connected to the system:
•Short press: opens the autopilot controller and puts the autopilot in standby
mode.
•Long press: toggles between panels on split screen.
DMenu key
•Press to display the active panel’s menu.
ERotary knob
•Turn to zoom or scroll the menu, press to select an option.
FEnter key
•Press to select an option or save settings.
GExit key
•Press to exit a dialog, return to previous menu level, and clear cursor from panel.
EN

4|
HMOB keys
• Press simultaneously the Enter and Exit keys to create a MOB (Man Over Board) at
the vessel’s position.
IArrow keys
• Press to activate cursor or to move cursor.
• Press to navigate through menu items and to adjust a value.
JMark key
• Press to place waypoint at vessel position, or at cursor position when cursor is
active.
• Press and hold to open the Plot dialog from where you can add or manage
waypoints, routes and tracks.
KPower key
• Press and hold: turns the unit ON/OFF
• Short press once: displays the System Controls dialog.
• Repeat short presses: toggles through preset dimming levels.
LCard reader door
MDual card reader slots
Home page
A Settings button
B Toolbar
C Status bar
D Application page buttons
E Bridge Control
F Close button, closes the current
panel
G System Controls button
H Favorites bar
I Man Over Board (MOB) button
The MOB mark
To create a MOB mark:
• Press the MOB button.
• Simultaneously press the Enter and Exit keys.
To stop displaying navigational information to the MOB waypoint: cancel the navigation
from the menu.
G
A
H
CD E
B F
I

| 5
NSS evo3S | Quick Guide - EN
System Controls dialog
Used for quick access to system settings.
Activate the dialog by:
• Pressing the System Controls button.
• Swiping from the top of the screen.
• Pressing the Power key.
¼Note: The content of the System Controls dialog depends on connected equipment
and active panel.
Application pages
D
A
E
BC
A Home/pages button
B Application panel
C Menu button
D Instrument bar
E Control bar
Adjust panel size
You can adjust the panel sizes in a split page.
1. Tap the adjust split button in the System Controls dialog to show the resize icon
2. Drag the resize icon to set preferred panel size
3. Save the changes by tapping the screen.
Charts
• Zoom the chart by using spread or pinch
gestures or by using the zoom buttons.
N

•Move the view in any direction by panning the chart.
•Display information about a chart item by tapping the item.
Waypoints
To create a waypoint:
•Press the Mark key to instantly add a waypoint.
•Select the new waypoint option in the menu.
¼Note: With cursor inactive, the waypoint is placed at vessel’s position. With cursor
active, the waypoint is placed at selected cursor position.
Echosounder
•Zoom the image by using the zoom buttons.
•View echosounder history by panning the image.
•Adjust gain and color using the slide bar in the
menu.
•Toggle auto gain ON/OFF from the menu.
Autopilot
•Activate the autopilot controller from the Control bar.
•Select an autopilot mode by pressing the mode button from the
Control bar.
•Switch to standby mode from the autopilot controller or by using
a physical Standby key.
Radar
•Turn the radar transmitting ON/OFF from the
menu.
•Adjust radar range by using the zoom buttons on
the radar panel.
Discover other marine GPS navigation on our website.