Advantech FPM-212 Series User manual

User Manual
FPM-212/215/217
Series
12"XGA/15" XGA/17" SXGA
Industrial monitor with
Resistive Touch screen,
VGA ,DP or HDMI Display Port,
and DC12 V input
顯示器
申請商: 研華股份有限公司
地址：台北市內湖區瑞光路 26 巷
20 弄1
號
電話：[phone]

限用物質含有情況標示聲明書
Declaration of the Presence Condition of the Restricted Substances Marking
設備名稱：顯示器
Equipment name Monitor 型號（型式）：
Type designation (Type) FPM-212
單元Ｕnit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛Lead
(Pb) 汞Mercury (Hg) 鎘Cadmium (Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominate
d diphenyl
ethers
(PBDE)
電路板 －○ ○ ○ ○ ○
液晶面板 －○ ○ ○ ○ ○
內外殼
(外殼、內部框架…等) ○ ○ ○ ○ ○ ○
其它固定組件
(螺絲、夾具、卡榫) － ○ ○ ○ ○ ○
線材 － ○ ○ ○ ○ ○
觸控模組 － ○ ○ ○ ○ ○
電源供應器 －○ ○ ○ ○ ○
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of
presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考3.〝－〞係指該項限用物質為排除項目。
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

限用物質含有情況標示聲明書
Declaration of the Presence Condition of the Restricted Substances Marking
設備名稱：顯示器
Equipment name Monitor 型號（型式）：
Type designation (Type) FPM-215
單元Ｕnit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛Lead
(Pb) 汞Mercury (Hg) 鎘Cadmium (Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominate
d diphenyl
ethers
(PBDE)
電路板 －○ ○ ○ ○ ○
液晶面板 －○ ○ ○ ○ ○
內外殼
(外殼、內部框架…等) ○ ○ ○ ○ ○ ○
其它固定組件
(螺絲、夾具、卡榫) － ○ ○ ○ ○ ○
線材 － ○ ○ ○ ○ ○
觸控模組 － ○ ○ ○ ○ ○
電源供應器 －○ ○ ○ ○ ○
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of
presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考3.〝－〞係指該項限用物質為排除項目。
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

限用物質含有情況標示聲明書
Declaration of the Presence Condition of the Restricted Substances Marking
設備名稱：顯示器
Equipment name Monitor 型號（型式）：
Type designation (Type) FPM-217
單元Ｕnit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛Lead
(Pb) 汞Mercury (Hg) 鎘Cadmium (Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominate
d diphenyl
ethers
(PBDE)
電路板 －○ ○ ○ ○ ○
液晶面板 －○ ○ ○ ○ ○
內外殼
(外殼、內部框架…等) ○ ○ ○ ○ ○ ○
其它固定組件
(螺絲、夾具、卡榫) － ○ ○ ○ ○ ○
線材 － ○ ○ ○ ○ ○
觸控模組 － ○ ○ ○ ○ ○
電源供應器 －○ ○ ○ ○ ○
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of
presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考3.〝－〞係指該項限用物質為排除項目。
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

Copyright
The documentation and the software included with this product are copyrighted 2013
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows® are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
This manual includes the following products:
FPM-212-R8AE
FPM-212
FPM212R8A2001-T,FPM212R8A2002-T,FPM212R8A2003-T,
FPM212R8A2004-T,FPM212R8A2005-T,FPM212R8A2006-T,
FPM212R8A2101-T,FPM212R8A2102-T,FPM212R8A2103-T,
FPM212R8A2104-T,FPM212R8A2105-T,FPM212R8A2106-T,
FPM212R8A2201-T,FPM212R8A2202-T,FPM212R8A2203-T,
FPM212R8A2204-T,FPM212R8A2205-T,FPM212R8A2206-T,
FPM212R8A2301-T,FPM212R8A2302-T,FPM212R8A2303-T,
FPM212R8A2304-T,FPM212R8A2305-T,FPM212R8A2306-T,
FPM212R8A2401-T,FPM212R8A2402-T,FPM212R8A2403-T,
FPM212R8A2404-T,FPM212R8A2405-T,FPM212R8A2406-T,
FPM212R8A2501-T,FPM212R8A2502-T,FPM212R8A2503-T,
FPM212R8A2504-T,FPM212R8A2505-T,FPM212R8A2506-T,
FPM212R8A2601-T,FPM212R8A2602-T,FPM212R8A2603-T,
FPM212R8A2604-T,FPM212R8A2605-T,FPM212R8A2606-T,
FPM-215-R8AE
FPM-215
FPM215R8A2001-T,FPM215R8A2002-T,FPM215R8A2003-T,
FPM215R8A2004-T,FPM215R8A2005-T,FPM215R8A2006-T,
FPM215R8A2101-T,FPM215R8A2102-T,FPM215R8A2103-T,
FPM215R8A2104-T,FPM215R8A2105-T,FPM215R8A2106-T,
FPM215R8A2201-T,FPM215R8A2202-T,FPM215R8A2203-T,
FPM215R8A2204-T,FPM215R8A2205-T,FPM215R8A2206-T,
FPM215R8A2301-T,FPM215R8A2302-T,FPM215R8A2303-T,
FPM215R8A2304-T,FPM215R8A2305-T,FPM215R8A2306-T,
FPM215R8A2401-T,FPM215R8A2402-T,FPM215R8A2403-T,
FPM-212/215/217 series

FPM215R8A2404-T, FPM215R8A2405-T, FPM215R8A2406-T,
FPM215R8A2501-T, FPM215R8A2502-T, FPM215R8A2503-T,
FPM215R8A2504-T, FPM215R8A2505-T, FPM215R8A2506-T,
FPM215R8A2601-T, FPM215R8A2602-T, FPM215R8A2603-T,
FPM215R8A2604-T, FPM215R8A2605-T, FPM215R8A2606-T,
FPM-217-R8AE
FPM-217
FPM217R8A2001-T, FPM217R8A2002-T, FPM217R8A2003-T,
FPM217R8A2004-T, FPM217R8A2005-T, FPM217R8A2006-T,
FPM217R8A2101-T, FPM217R8A2102-T, FPM217R8A2103-T,
FPM217R8A2104-T, FPM217R8A2105-T, FPM217R8A2106-T,
FPM217R8A2201-T, FPM217R8A2202-T, FPM217R8A2203-T,
FPM217R8A2204-T, FPM217R8A2205-T, FPM217R8A2206-T,
FPM217R8A2301-T, FPM217R8A2302-T, FPM217R8A2303-T,
FPM217R8A2304-T, FPM217R8A2305-T, FPM217R8A2306-T,
FPM217R8A2401-T, FPM217R8A2402-T, FPM217R8A2403-T,
FPM217R8A2404-T, FPM217R8A2405-T, FPM217R8A2406-T,
FPM217R8A2501-T, FPM217R8A2502-T, FPM217R8A2503-T,
FPM217R8A2504-T, FPM217R8A2505-T, FPM217R8A2506-T,
FPM217R8A2601-T, FPM217R8A2602-T, FPM217R8A2603-T,
FPM217R8A2604-T, FPM217R8A2605-T, FPM217R8A2606-T,
Part No. xxxxxxxxxxxxx Edition 1
Printed in China Sep. 2020
FPM-212/215/217 series

Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur-
chase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty period. For out-
of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantechproducts used, other hardwareand software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchasedate is
not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
FPM-212/215/217 series

Declaration of Conformity
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
-Product name and serial number
-Description of your peripheral attachments
-Descriptionof your software (operatingsystem, version, applicationsoftware,
etc.)
-A complete description of the problem
-The exact wording of any error messages
FPM-212/215/217 series

Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equip-
ment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or
letting
it
fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipmentis not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the
user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENTWHERE THE
STORAGETEMPERATUREMAY GO BELOW 0° C (32° F) OR ABOVE 50° C
(122° F). THIS COULD DAMAGE THE EQUIPMENT.THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. The soundpressurelevel at the operator'spositionaccordingtoIEC 704-1:1982
is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
By means of a power cord connected to a socket-outlet with earthing connection.
Note! This product is intended to be supplied by an UL certified power supply
or dc source suitable for use at minimum Tma 50 degree °C whose out-
put meets SELV or ES1, LPS or PS2 and is rated 12Vdc,3Amin., if
need further assistance, please contact Advantech for further informa-
tion.
FPM-212/215/217 series

Warning! If the customer user DC power by oneself for this product may cause the
radio interference in which case, the customer must take adequate
measures.
Warning! If the customer needs to use power adapter, please use the power
adapter listed on the product datasheet. If the customer use the power
adapter not listed on the product datasheet, it may cause the radio
interference in which case, the customer must take adequate
measures
Warning! Avoid exposing FPM-200 to direct sunlight for long periods of time. Direct
sunlight falling onto a LCD screen can cause it to become very hot and
physically damage the LCD as the components are not designed to
tolerate high heat, shortening the life of the LCD.
Warning! The wire of the protective bonding conductor shall be green-and-yellow,
22AWG / 0.3(mm2) min.
FPM-212/215/217 series