Simrad LiveSight 000-14458-001 User manual

| 1
LiveSight | Quick Guide
LiveSight
Quick Guide
About this document
This document describes the main features and setup of the LiveSight transducer.
As the transducer can be used with dierent display units, this document may not
cover product specic key references. Use your display unit’s documentation in
addition to this quick guide to fully understand how to use and adjust the LiveSight
image.
Installation
Mounting
The LiveSight transducer can be mounted in a front facing or in a down-facing
position. The mounting decides the operational mode.
• Forward looking mode Mounted to the trolling motor
shaft
• Down looking mode
Mounted to the transom, below
the trolling motor or thru-hull
mounted
Oset angle adjustment, forward looking mounted transducers
The brackets only allow the transducer to be mounted at one set angle to the
trolling motor arm.
The best mounting angle for the transducer is obtained when the trolling motor arm
is perpendicular to the waterline. If the trolling motor arm is not perpendicular to
the waterline, the oset angle option in the LiveSight Installation dialog can be used
to ne-tune the transducer angle.
Refer to your system’s installation manual for information about how to access the
settings dialogs.
EN

2 | LiveSight | Quick Guide
Wiring
Display units with built-in LiveSight support connect directly to the LiveSight
transducer.
Other units that support LiveSight must be connected by using a PSI-1 unit. Refer to
the installation guide included with the PSI-1 unit.
Startup wizard
At rst start-up or after a reset, the display will recognize if an un-congured
LiveSight transducer is connected to the unit. The start-up wizard will then
automatically be started.
The mode (forward or down) must be dened in the wizard or in the installation
dialog to display the LiveSight icon on the home page.
The LiveSight panels
Multiple LiveSight sources operate independent of one another, and each source
can be assigned to a panel on the display.
C
B
A
C
B
A
Forward looking mode Down looking mode
ALiveSight forward: range scale (distance)
LiveSight down: range scale (front to back)
BLiveSight icon
CDepth range scale
The LiveSight icon
The LiveSight icon on the image indicates the beam direction.

| 3
LiveSight | Quick Guide
Operation
Selecting User mode
The system has two built-in User modes:
• Auto mode
-including predened image settings that t most users
• Custom mode
-expands the main menu to allow for user specic image settings
You toggle between the modes by selecting the Mode option in the main menu.
The menu
The menu options depend on selected User mode.
Main menu > More options
This menu option is available for both Auto and Custom User mode.
Stop sonar
Stops the sonar pinging. When selected, the image pauses as no depth data is
received.
Target trails
Indicates the target movement by leaving an afterglow, gradually reducing the
intensity over time.
Palette
Several palettes are included. Select the palette that best suits your working
conditions, e.g. eyesight, light conditions and bottom composition.
Range grid
A range grid can be added to the image. The grid is useful for determining the
distance to targets.
Record video
You can record LiveSight video to a memory card.
All LiveSight recordings are done in a standard .mp4 format, making them ideal for
playback on a computer or sharing via the internet.
¼Note: This option is only available when a memory card is inserted.

4 | LiveSight | Quick Guide
Main menu, Custom User mode
Cross range
Determine the distance that is visible on the image.
¼Note: This option is only available with LiveSight forward.
Down range
Determines the water depth that is visible on the image.
Sensitivity
Controls the level of details on the screen.
Too much detail clutters the screen. Conversely, desired targets may not be
displayed if sensitivity is set too low.
Advanced options
• Noise rejection
-Signal interference from bilge pumps, engine vibration and air bubbles can
clutter the image. The noise rejection option lters those signal interferences
and reduces the on-screen clutter.