SINGGATE FR057 User manual

FR057
User Manual
1. Adding Master Password (when Factory Reset Mode)
Step 1
Step 2
Step 3
Tap on “ ” and then “ ” to enter
setting mode
Enter a “123456” (default
password) and tap on “” to
confirm
1. Press Number 1 (Admin Set)
2. Press Number 1 (Add Admin)
3. Input information
-type password and press “ ”
and repeat (MUST remember the
admin passwords)
- scan fingerprint 5 times (same
position)

2. User Manage (Adding Admin or Users)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“ ” to enter setting mode
Verify Admin by passwords
or fingerprints
If want to add Admin, please
press “1” Admin Set
If want to add User, please
press “2” User Set
Press “1” again (Add Admin /
Add User)
Input information :
- type password and press
“ ” and repeat
OR
- scan fingerprint 5 times
(same position)
OR
- tap the RFID Card on
“card icon” (below number 5)
2. User Manage (Adding Face ID)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“ ” to enter setting mode
Verify Admin by passwords
or fingerprints
Press “2” User Set
Press “4” (add Face)
Press “1” (add Face)
After that, see the door
lock’s camera a few seconds

3. User Manage (Modifying Admin or Users)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“ ” to enter setting mode
Verify Admin by passwords
or fingerprints
If want to modify Admin,
please press “1” Admin Set
If want to modify User,
please press “2” User Set
Press “2” (Modify Admin /
Add User)
Type the ID number that
want to modify
Input new information :
- type password and press
“ ” and repeat
OR
- scan fingerprint 5 times
(same position)
OR
- tap the RFID Card on
“card icon” (below number 5)
4. System Setting (Time Setting)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“” to enter setting mode
Verify Admin and press “3”
System Setting
Press “1” Time Setting and
enter the details in the
following format:
YY : MM : DD HH : MM
Press “” to confirm and
Press “” to exit setting
mode

5. System Setting (Language and Voice Volume Setting)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“” to enter setting mode
Verify Admin and press “3”
System Setting
Press “4” Language and
Volume Setting and you will
see the following options:
1. Chinese
2. English
3. Volume Low
4. Volume High
Press “” to confirm and
Press “” to exit setting
mode
6. System Setting (Single Mode and Double Mode)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“” to enter setting mode
Verify Admin and press “3”
System Setting
Press “2” Unlock Mode
and You will see the
following options:
1. Single Mode
2. Double Mode
Press “” to confirm and
Press “” to exit setting
mode

7. System Setting (Body Detect)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“ ” to enter setting mode
Verify Admin and press “3”
System Setting
Press “3” Lockbody Mode
Keep pressing “3” until PIR
SW [off] to turn off
Press “” to confirm and
Press “ ” to exit setting
mode
8. System Setting (Restore Factory Setting/ Factory Reset)
Step 1
Step 2
Step 3
Step 4
Press on “ ” and then
“ ” to enter setting mode
Verify Admin and press “1”
Admin Set
Press “4” Factory Reset
and Press “” to confirm
Press “” to exit setting
mode

9. Connect to Wi-Fi (Please download USmart Go)
Step 1
Step 2
Step 3
Step 4
Download USmart Go into
your phone and register for
an account first.
Go to the lock setting
Press number “9” x3 times
and press “ ”
Go into Usmart Go App
and click Add Device
Select Connect via Wi-Fi
hotspot
After that go into your
phone’s WiFi Setting
and select CloudHome-
XXXXXXXX to connect
Step 5
Step 6
Step 7
Step 8
After connected the
CloudHome-XXXXXXXX
WiFi, go back to the
Usmart Go App, and it is
loading a few seconds
Select your home Wi-Fi to
connect and type the
password of home Wi-Fi
Press Search Device and
show checking network
and wait within 1 minute
Once successful, your phone
screen will show “Connected
to server” and the system
will say success.

10. Door Viewer Setting
Setup mode
Language
Date/Time
Press the “OK”and then “ ” to
enter setting mode. Press the right
button twice and select Setup ( )
to press “OK”a few seconds
Select Record Mode and you will
see the following options:
1. Photo Mode
2. Video Mode
Press the “OK”and then “ ” to
enter setting mode. Press the right
button twice and select Setup ( )
to press “OK”a few seconds
Select Language and you will see
the following options:
1. English
2. 简体中文
Press the “OK”and then “ ” to
enter setting mode. Press the right
button twice and select Setup ( ) to
press “OK”a few seconds
Select Time Setting and enter the
details in the following format:
2021 / 01 / 02
18 : 52 : 48
YY/MM/DD