SINGGATE FR058 User manual

1. Adding Master Password (After Factory Reset Mode)
Step 1
Step 2
Step 3
Step 4
Tap on “*” and then “#”
to enter setting mode
Press 1 (New User)
Press 1 (Register key)
Type admin password
(6 digits) & press “ # ”
FR 058
User Manual

2. User Manage (Adding Admin or Users)
Step 1
Step 2
Step 3
Step 4
Tap on “*” and then “#” to
enter setting mode
Verify Admin by
passwords or finger vein
and press “#”
Press 1 (New User)
For add Admin, please
enter user number “00”
Admin Set
For add User , please enter
user number from “01”to
“99”
**NOTE :
User 00 is an administrator.
The system has no
permission to delete the
administrator. The
administrator can be
deleted during initialization
After that press 1
(Register key)
Input information :
1. type password and press “
# ” and repeat again
OR
2. scan finger vein 5 times
(same position)
OR
3. tap the RFID Card on
“Card Icon” (below number
5)
3. User Manage (Adding Face ID)
Step 1
Step 2
Step 3
Step 4
Tap on “*” and then “#” to
enter setting mode
Verify Admin by
passwords or finger vein
and press “#”
Press 1 (New User)
For add Admin, please
enter the user number
“00” Admin Set
For add User, please
enter the user number
from “01”to “99”
Press 2 (Enrol On Face)
Scan the face 5 times

4. User Manage (Delete Users)
Step 1
Step 2
Step 3
Tap on “*” and then “#” to enter
setting mode
Verify Admin by passwords or
finger vein and press “#”
Press 2 (Delete User)
Please enter the user that you want to
delete
**NOTE :
User 00 is an administrator. The
system has no permission to delete the
administrator. The administrator can
be deleted during initialization
5. System Setting (Time Setting)
Step 1
Step 2
Step 3
Tap on “*” and then “#” to enter
setting mode
Verify Admin by passwords or
finger vein and press “#”
Press 3 (System Setting)
Press 1 (Time Setting) and enter the details in
the following format:
YYYY : MM : DD
HH : MM

6. System Setting (Volume and Language Setting)
Step 1
Step 2
Step 3
Step 4
Tap on “*” and then “#” to
enter setting mode
Verify Admin by
passwords or finger vein
and press “#”
Press 3 (System Setting)
Press “2” Volume Setting
and you will see the
following options:
1. Volume + (press 1 a few
times if wan to increase
volume)
2. Volume –(press 2 a few
times if want to decrease
volume)
Press 4 (Language Setting)
you will see the following
options:
1. Chinese
2. English
7. System Setting (Single Mode and Double Mode)
Step 1
Step 2
Step 3
Step 4
Tap on “*” and then “#” to
enter setting mode
Verify Admin by
passwords or finger vein
and press “#”
Press 3 (System Setting)
Press “3” verify mode and
You will see the following
options:
1. Single Mode
2. Double Mode
Press “# ” to confirm and
Press “ * ” to exit setting

8. System Setting (Body Detect/Radar)
Step 1
Step 2
Press 5 and “#” to enter setting mode
After verify You will see the following options:
1. infrared induction on
2. infrared induction off
9. System Setting (Restore Factory Setting/ Factory Reset)
Step 1
Step 2
Step 3
Step 4
Tap on “*” and then “#” to
enter setting mode
Verify Admin by
passwords or finger vein
and press “#”
Press 6 (Factory Reset)
Press “#”yes to confirm
Press “*” to exit setting mode

10. Connect to Wi-Fi (Please download USmart Go App)
Step 1
Step 2
Step 3
Step 4
Download USmart Go app
into your phone and register
for an account first.
Go to the lock setting Press
number “1 and “#”Verify
Admin
Go into Usmart Go App
and click “Add Device”
Select Connect via Wi-Fi
hotspot
After that go into your
phone’s WiFi Setting and
select CloudHome-
XXXXXXXX to connect
Step 5
Step 6
Step 7
Step 8
After connected the
CloudHome-XXXXXXXX
WiFi,
go back to the Usmart Go
App, and it is loading a few
seconds
Select your home Wi-Fi to
connect and type the
password of home Wi-Fi
**NOTE:
Please connect with 2.4ghz
WiFi
Press Search Device and
show checking network and
wait within 1 minute
Once successful, your phone
screen will show “Connected
to server” and the system will
say success.