Sinotint SC06 User manual

SC06 Water Curtain Cabinet User Guide
Please read the manual before using.

ZHENGZHOU SANHUI MACHINERY & EQUIPMENT CO.,LTD. OPERATION MANUAL/说明书
Contents
1. Introduction......................................................................................................... 1
2. Precaution：........................................................................................................1
3. Product Specifications.............................................................................................1
4. Electrical Principle Chart........................................................................................ 2
5. Installation...........................................................................................................2
6. Test Running........................................................................................................ 4
7. Maintenance.........................................................................................................4
8. Trouble Shooting ..................................................................................................5

ZHENGZHOU SANHUI MACHINERY & EQUIPMENT CO.,LTD. OPERATION MANUAL/说明书
1
1.
1. Introduction Introduction
Thanks for purchasing our products.
Our water curtain cabinet/paint retractable cabinet is a brand-new mode which will bring you much
convenience in installation and operation. Please read the manual in details and begin installation
and operation after having detail knowledge regarding safety and operation.
Though products specifications are diversified, installation and operation method are
basically similar, so we only illustrate for a general structure cabinet. SINOTINT reserves the
right to improve and update products, and the information in the manual is subject to change
without additional notice.
2.
2. Precaution Precaution： ：
Please read the precaution carefully before installation.
1) Check if the voltage and frequency are accordance with what on the nameplate that stuck
on the left side plate
2) The cabinet must be placed on leveling solid ground.
3) The cabinet should be placed in dry and well-ventilated space. Do not operate it in
dangerous occasion which may cause explosion.
4) The cabinet should be equipped with well grounding. Do not assemble or disassemble the
cabinet without permission.
5) Fill the tank with water and the pump should not idle.
6) All maintenance work must be done after both machine halt and power supply
disconnected. NO maintenance without disconnect power supply or during working.
7) Do not use inflammable liquid to clean the cabinet.
8) Children are forbidden to approach the cabinet.
3.
3. P Product roduct Specifications Specifications
Standard configuration：
Series
Series
Exhaust gas
treatment
Waste
water
treatment
Shape Size(mm)
(L×W×H)
SC06
yes
yes
620*700*1700
Power: 1100W.

ZHENGZHOU SANHUI MACHINERY & EQUIPMENT CO.,LTD. OPERATION MANUAL/说明书
2
4.
4. Electrical Electrical Principle Principle Chart Chart
4.1 Electrical Principle Chart
5.
5. Installation Installation
Open the carton box, check the articles and quantity inside according to the packing list. Take
out tools and accessories, then install the machine following the manual.
Remarks: pictures shows in the manual are of standard equipment, if different, install the spare
parts in the corresponding place.
5.1 Open the package, take out the paint spray rack and accessories.
Take out the paint spray rack
and other accessories
Socket

ZHENGZHOU SANHUI MACHINERY & EQUIPMENT CO.,LTD. OPERATION MANUAL/说明书
3
5.2 Open the top air outlet and connect it to the outside or to the main exhaust gas treatment pipe.
5.3 Fill the tank with 2/3 water, then place the paint spray rack.
Air outlet duct
paint spray rack
Fill with water

ZHENGZHOU SANHUI MACHINERY & EQUIPMENT CO.,LTD. OPERATION MANUAL/说明书
4
5.4 Fix the spray gun holder on the side.
6.
6. Test Test running running
1. Connect the power supply and air source.
2. Check the if emergency stop button open or not, switch on the circuit breaker, start the water
curtain button and extension button separately.
3. After cabinet is turned on, connect the air source and you can have a test paint spraying.
7.
7. Maintenance Maintenance
Remarks：
1. The water in the tank should cover the pump, clean the tank every 7-15 days(adjust the time
according to usage )
2. There is an air filter under the air outlet. Base layer needs to be replaced every 3-5 days and
upper layer needs to be replaced every 7-15 days.
3. Replacement for the air filter: take out the air filter and replace with a new one.
Take out the filter box
take out the air filter
replace with a new one
Fix with M4*12 screws
Replace the filter

ZHENGZHOU SANHUI MACHINERY & EQUIPMENT CO.,LTD. OPERATION MANUAL/说明书
5
8.
8. Trouble Trouble shooting shooting
All maintenance work must be done after both machine halt and power supply
disconnected. NO maintenance without disconnect power supply or during working.
Symptoms
Causation
Troubles Shooting
Pump doesn’t
work
No power supply
Check the socket and the power cord, make sure that there is power
supply.
Miniature circuit
breaker switched
off
Switch on the miniature circuit breaker.
Voltage is too low
Measure if the voltage is located within 220V ±8%; If not, equip
with a regulator n。
Pump is damaged.
Change a new adaptor and connect the power supply.
Emergency Stop
Button is power off
Turn the Emergency Stop Button clockwise, and it will be powered
on.
No water in tank
Fill the tank with water.
Overheated
protection
The machine will stop working while motor temperature is over
50℃. Start the machine again after it has been cooled down.
Air blower doesn’t
work
No power supply
Check the socket and the power cord, make sure that there is power
supply.
Miniature circuit
breaker switched
off
Switch on the miniature circuit breaker.
Voltage is too low
Measure if the voltage is located within 220V ±8%; If not, equip
with a regulator n。
Pump is
damaged.
Change a new adaptor and connect the power supply.
Emergency Stop
Button is power off
Turn the Emergency Stop Button clockwise, and it will be powered
on.
Air filter is blocked
Air filter is clogged with paint, need to replace with a new one.

Henan Sanhui Technology Co., Ltd.
A10, 2F,Building 4, No.206, West 4th Ring Rd, HI-NEW Tech Zone, Zhengzhou,Henan, P.R.China
TEL：[phone] FAX：[phone] Website：www.sinotint.cn