
Installation Instructions
1. Secure bracket to wall, stud or vent pipe with stainless steel band or clamp.
Or, suspend bracket overhead using two ⅜" threaded rods.
2. Insert 2 screws into each strap.
3. Install strap(s) into bracket channel and push down. Tighten screws securely.
#IS-PIPETITAN 8-19
Specications
Standard Green Bracket (570 series) ABS, U.V. stabilized
Standard Clamp & Strap Natural high-density polyethylene
Flame Retardant Red Bracket,
Clamp & Strap (572 series) Flame retardant ABS, UL-94 VO
Screws Zinc coated steel, " hex/Phillips head, 2" (strap) and 4" (clamp)
Stainless Steel Bands
300 series stainless steel: ½" wide × .025, 5" band = 4" max
diameter, 7" band = 6" max diameter
Screw: 410 series stainless, slotted/hex head
A – 11"
B – 2½"
C – 1"O.C.
D – 1¼"
E– 1 "
F– "
G– "
H – 1¼"
I– holds ⅝" O.D. – 1" O.D.
J– ⅜"
K– holds ⅜" O.D. – 3½"
L – 1¾"
M – holes for screws
Safe Working Load
Bracket
Strap Clamp
Side View
Top View
½ failure load at 72°F
When suspended from foot end
272 lbs.
155 lbs.
90 lbs.
72 lbs.
62 lbs.
50 lbs.
47 lbs.
42 lbs.
40 lbs.
B
HIK
D
A
C
F F
L
M
GG
Supply Drainage Support Specialties
Universal Bracketing System