5
SAFETY INSTRUCTIONS….cont
KEEP CHILDREN AND UNTRAINED PERSONNEL AWAY FROM THE WORK AREA: All visitors
should be kept at a safe distance from the work area.
STORE THE PLASMA CUTTER SAFELY WHEN NOT IN USE: The plasma cutter should be
stored in a dry location and disconnected from the mains supply, and out of the
reach of children.
USE SAFETY CLOTHING / EQUIPMENT: Use a CE approved mask / goggles at all times
with the correct shade of filter lens. A fume extractor should be used particularly where
there is little or no ventilation.
PROTECT YOURSELF FROM ELECTRIC SHOCK: When working with the plasma cutter,
avoid contact with any earthed items (e.g. pipes, radiators, hobs and refrigerators,
etc.). It is advisable wherever possible to use an RCD (residual current device) at the
mains socket.
STAY ALERT: Always watch what you are doing and use common sense. Do not oper-
ate the plasma cutter when you are tired or under the influence of alcohol or drugs.
DISCONNECT THE PLASMA CUTTER FROM THE MAINS SUPPLY: When not in use and be-
fore servicing.
NEVER LEAVE THE PLASMA CUTTER CONNECTED WHILST UNATTENDED: Turn the plasma
cutter off and disconnect it from the mains supply between jobs. Do not leave the
plasma cutter connected to the mains supply if no more cutting is to be done.
DO NOT ABUSE THE MAINS LEAD: Never attempt to move the plasma cutter by the
mains lead or pull it to remove the plug from the mains socket. Keep the mains lead
away from heat, oil and sharp edges. If the mains lead is damaged, it must be re-
placed by the manufacturer or its service agent or a similarly qualified person in order
to avoid unwanted hazards. All extension cables must be checked at regular intervals
and replaced if damaged.
CHECK FOR DAMAGED PARTS: Before every use of the plasma cutter, any damage
found should be carefully checked to determine that it will operate correctly, safely
and perform its intended function. Any damaged, split or missing parts that may af-
fect its operation should be correctly repaired or replaced by an authorised service
centre unless otherwise indicated in this instruction manual.
KEEP ALL PANELS IN PLACE: Never operate the plasma cutter with the panels removed,
this is extremely dangerous.
MAINTAIN THE PLASMA CUTTER WITH CARE: Keep the earth clamp and torch consum-
ables clean for the best and safest performance, replace as necessary.
USE ONLY RECOMMENDED ACCESSORIES: Consult this user manual, your distributor or
SIP directly for recommended accessories. Follow the instructions that accompany the
accessories. The use of improper accessories may cause hazards and will invalidate
any warranty you may have.
SECURE THE WORKPIECE: Always use clamps to secure the workpiece. This frees up
both hands to operate the plasma cutter correctly.
DO NOT OVERREACH: Keep proper footing and balance at all times.
USE THE RIGHT TOOL: Do not use the plasma cutter to do a job for which it was not
designed.
