Sirio Antenne TG 819 User manual

Model TG 819, TG 918TG 819, TG 918
TG 819, TG 918TG 819, TG 918
TG 819, TG 918
On-Glass Dual-Band AntennaOn-Glass Dual-Band Antenna
On-Glass Dual-Band AntennaOn-Glass Dual-Band Antenna
On-Glass Dual-Band Antenna
(TG 819: AMPS(TG 819: AMPS
(TG 819: AMPS(TG 819: AMPS
(TG 819: AMPS & PCS. TG 918: GSM 900 & 1800)PCS. TG 918: GSM 900 & 1800)
PCS. TG 918: GSM 900 & 1800)PCS. TG 918: GSM 900 & 1800)
PCS. TG 918: GSM 900 & 1800)
Installation ManualInstallation Manual
Installation ManualInstallation Manual
Installation Manual
BCopyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 16/06/2003 - Cod. ID246
MOUNTING INSTRUCTIONS
2. Repeat the above mentioned instructions
to fit the coupling-box at the inside window;
but you have to pay attention to the coupling-
box that must to coincide with the outside
mount profile.
3. Screw the FME connector at the coupling-
box.
4. As the final stage of your installation, screw
the whip at the mount joint; lock the joint by
using a screw-driver and keep the whip in a
vertical position.

DESCRIPTION
TG 918 and TG 819 are a dual-band mobile antennas conceived for cellular system working on
GSM 900 & 1800 MHz (TG 918) or AMPS & PCS (TG 819). The whip can be easily adjusted in
vertical position and can be detached for car-washes access. It is made of 17/7 PH stainless steel
protected by a thermoplastic material. The box made of ABS is screened and has a printed circuit
in Microstrip technology. The 3M VHB adhesive supplied guarantees a perfect adherence in bad
atmospheric conditions too.
SPECIFICATIONS
Electrical Data
Type : 1/4 λat both bands
Frequency Range
TG 819 : 824-894 MHz (AMPS) &1.85-1.99 GHz (PCS)
TG 918 : 880-960 MHz (GSM 900) &1.71-1.88 GHz (GSM 1800)
Impedance : 50 ΩUnbalanced
Radiation : Omnidirectional
Polarization : Vertical
Gain (both models) : 0 dB ref. to λ/4 whip on glass at both bands
V.S.W.R.:
TG 819 : AMPS TX band (824-849 MHz) ≤1.7:1
AMPS RX band (869-894 MHz) ≤2.4:1
PCS (1.85-1.99 GHz) ≤2.2:1
TG 918 : GSM 900 band (880-960 MHz) ≤2:1
GSM 1800 band (1.71-1.88 GHz) ≤1.8:1
Max Power : 10 Watts
Coupling box Connection : FME Male
Mechanical Data
Materials : Stainless steel 17/7 PH, Chromed brass, ABS
Height (approx.) : 100 mm
Weight (approx.) : 50 gr
Mounting : "On-Glass"
ID246
MOUNTING INSTRUCTIONS
1. Remove the protective film avoiding to touch
the adhesive with your hands; proceed with
the assembling of the mount on the window
pressing uniformly on its whole surface to get
a perfect adhesion.
••
••
•NOTE: It is recommended the installation of this antenna on the vehicle rear window in a
central position, far from the window thermic wires.
Morever, we suggest to clean carefully the glass surface and to proceed with the installation at
temperature of 20oC.

TG 918 C GDD seriesTG 918 C GDD series
TG 918 C GDD seriesTG 918 C GDD series
TG 918 C GDD series
On-Glass Dual-Band UHF Antenna (GSMOn-Glass Dual-Band UHF Antenna (GSM
On-Glass Dual-Band UHF Antenna (GSMOn-Glass Dual-Band UHF Antenna (GSM
On-Glass Dual-Band UHF Antenna (GSM/DCS-PCN)DCS-PCN)
DCS-PCN)DCS-PCN)
DCS-PCN)
Installation ManualInstallation Manual
Installation ManualInstallation Manual
Installation Manual
BCopyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 13/01/2003 - Cod. ID278
MOUNTING INSTRUCTIONS
2. Repeat the above mentioned instructions
to fit the coupling-box at the inside window;
but you have to pay attention to the coupling-
box that must to coincide with the outside
mount profile.
3. Screw the FME connector at the coupling-
box.
4. As the final stage of your installation, screw
the whip at the mount joint; lock the joint by
using a screw-driver and keep the whip in a
vertical position.
Anti-noise system
Our exclusive anti-noise design produces air
movement around the whip, virtually
eliminating wind noise.

DESCRIPTION
Dual-band mobile antenna conceived for GSM and DCS/PCN 1.8 GHz cellular system working
on 880-960 MHz and 1710-1880 MHz. The whip can be easily adjusted in vertical position and
can be detached for car-washes access. It is made of 17/7 PH stainless steel protected by a
thermoplastic material. The box made of ABS is screened and has a printed circuit in Microstrip
technology. The 3M VHB adhesive supplied guarantees a perfect adherence in bad atmospheric
conditions too.
SPECIFICATIONS
Electrical Data
Type : 1/4 λ+ 5/8 λColinear at 900 MHz
1/4 λat 1800 MHz
Frequency Range : 880-960 MHz (GSM 900)
1710-1880 MHz (GSM 1800, DCS/PCN 1.8)
Impedance : 50 ΩUnbalanced
Radiation : Omnidirectional
Polarization : Vertical
Gain : 3 dB ref. to λ/4 whip on glass at 900 MHz
0 dB ref. to λ/4 whip on glass at 1800 MHz
Bandwidth : GSM: Tx 880-915 MHz; Rx 925-960 MHz
DCS/PCN 1.8: Tx 1710-1785 MHz; Rx 1805-1880 MHz
V.S.W.R.:
Tx band (880-915 MHz) : ≤1.7 : 1
Rx band (925-960 MHz) : ≤2.0 : 1
Tx band (1710-1785 MHz) : ≤1.4 : 1
Rx band (1805-1880 MHz) : ≤2.7 : 1
Max Power : 10 Watts
Coupling box Connection : FME Male
Mechanical Data
Materials : Stainless steel 17/7 PH, Chromed brass, ABS
Height (approx.) : 355 mm
Weight (approx.) : 65 gr
Mounting : "On-Glass"
ID278
MOUNTING INSTRUCTIONS
1. Remove the protective film avoiding to touch
the adhesive with your hands; proceed with
the assembling of the mount on the window
pressing uniformly on its whole surface to get
a perfect adhesion.
••
••
•NOTE: It is recommended the installation of this antenna on the vehicle rear window in a
central position, far from the window thermic wires.
Morever, we suggest to clean carefully the glass surface and to proceed with the installation at
temperature of 20oC.