Sirio Antenne SY-906 User manual

Model SY-906SY-906
SY-906SY-906
SY-906
Base Station 6 element Yagi Antenna 824-960 MHzBase Station 6 element Yagi Antenna 824-960 MHz
Base Station 6 element Yagi Antenna 824-960 MHzBase Station 6 element Yagi Antenna 824-960 MHz
Base Station 6 element Yagi Antenna 824-960 MHz
Installation ManualInstallation Manual
Installation ManualInstallation Manual
Installation Manual
BCopyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 20/07/2000 - Cod. ID288

DESCRIPTION
Base station antenna conceived for AMPS, TACS and GSM 900 cellular systems working on 824-
960 MHz. The boom and the parasitic elements are made of alluminium and radiant dipole is
realized on PCB in Microstrip technology protected by a thermoplastic material.
SPECIFICATIONS
Electrical Data
Type : 6 element Yagi
Frequency Range : 824-960 MHz (AMPS, TACS, GSM 900)
Impedance : 50 ΩUnbalanced
Radiation : Directional
Polarization : Vertical
Max Gain : 9.3 dBd, 11.5 dBi
Half Power Beamwidth : E-plane 47°/ H-plane 58° at 890 MHz
Front to Back : > 16 dB
Cross Polarization isolation : > 20 dB
Bandwidth at V.S.W.R. 2:1 : 167 MHz
V.S.W.R. : ≤1.4:1 from 824 to 960 MHz
Max Power : 10 Watts
Feed System : Folded dipole with microstrip Balun, DC-Ground
Connector type : FME Male
Mechanical Data
Materials : Aluminium, Nikel brass, PCB, Thermoplastic
Dimensions (approx.) : 190 x 580 x 60 mm
Turning Radius : 560 mm
Mounting Mast Diameter : 25-42 mm
Wind Surface : 0.02 m2
Wind Load / Resistance : 27 N at 150 Km/h / 180 Km/h
Weight (approx.) : 410 gr
ID288
MOUNTING INSTRUCTIONS
Bracket Assembly Final Assembly for
vertical polarization
Connection Detail
FME male
Shrinkable tube
Optional cable with FME female
Final Pointing On Repeater
Repeater
Max. Signal
Shrinking with hot air

Model SY-910SY-910
SY-910SY-910
SY-910
Base Station 10 element Yagi Antenna 824-960 MHzBase Station 10 element Yagi Antenna 824-960 MHz
Base Station 10 element Yagi Antenna 824-960 MHzBase Station 10 element Yagi Antenna 824-960 MHz
Base Station 10 element Yagi Antenna 824-960 MHz
Installation ManualInstallation Manual
Installation ManualInstallation Manual
Installation Manual
BCopyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 20/07/2000 - Cod. ID289

DESCRIPTION
Base station antenna conceived for AMPS, TACS and GSM 900 cellular systems working on 824-
960 MHz. The boom and the parasitic elements are made of alluminium and radiant dipole is
realized on PCB in Microstrip technology protected by a thermoplastic material.
SPECIFICATIONS
Electrical Data
Type : 10 element Yagi
Frequency Range : 824-960 MHz (AMPS, TACS, GSM 900)
Impedance : 50 ΩUnbalanced
Radiation : Directional
Polarization : Vertical
Max Gain : 12.8 dBd, 15 dBi
Half Power Beamwidth : E-plane 34°/ H-plane 38° at 890 MHz
Front to Back : > 16 dB
Cross Polarization isolation : > 20 dB
Bandwidth at V.S.W.R. 2:1 : 167 MHz
V.S.W.R. : ≤1.4:1 from 824 to 960 MHz
Max Power : 10 Watts
Feed System : Folded dipole with microstrip Balun, DC-Ground
Connector type : FME Male
Mechanical Data
Materials : Aluminium, Nikel brass, PCB, Thermoplastic
Dimensions (approx.) : 190 x 980 x 60 mm
Turning Radius : 960 mm
Mounting Mast Diameter : 25-42 mm
Wind Surface : 0.03 m2
Wind Load / Resistance : 48 N at 150 Km/h / 150 Km/h
Weight (approx.) : 500 gr
ID289
MOUNTING INSTRUCTIONS
Bracket Assembly Final Assembly for
vertical polarization
Connection Detail
FME male
Shrinkable tube
Optional cable with FME female
Final Pointing On Repeater
Repeater
Max. Signal
Shrinking with hot air