Siro SIS1602 User manual

15-Channel Remote Controller
SIS1602
Compatible with bidirectional SIRO drives:
ERBS15-LE
ERBS25-LE
EYAS25-LE
06-2020

1
1. Functional overview
The remote control SIS1602 is a radio transmitter, which can be used to manually
remotely control drives of the bidirectional LE-series from SIRO.
With SIS1602 you can control up to 15 drives individually. Use the P1 buttons to define the
channel of the respective drive before teaching-in individual drives.
Channel 0 is reserved for the control of all connected channels, allowing you to control all drives
simultaneously.
2. Installation
The remote controller SIS1602 requires a battery cell type CR2450 –3V as power
source. To ensure that the device can execute all commands, it is recommended to
replace empty batteries in time.
1. Open the battery compartment of the remote controller on the back by sliding the cover
down.
2. Insert the battery into the battery compartment with the plus pole facing upwards.
3. Close the battery compartment. The display flashes.
Please refer to the operation instructions of the LE-series drive you have received for the
procedure of teaching-in and end position setting.

2
3. Technical data
Technical data
Power supply:
3 Volt
Battery type:
CR2450
Working current:
≤12mA
Protection class:
IP 30
Operating temperature:
-20°C to +60°C
Radio frequency:
433.92 MHz
Channels:
15
Compatibility:
SIRO bidirectional LE Series
Check that you have received the correct device before commissioning. Also compare the
frequency information on the motor or controller nameplate.
4. Warranty conditions
SIRO Antriebs- und Steuerungstechnik offers a 2-year warranty on new drives that have been
professionally installed and properly operated in accordance with the installation instructions.
The warranty covers all design faults, material defects and manufacturing faults.
Any defects occurring within the warranty period will be remedied by SIRO free of charge by
supplying an equivalent or new product. Replacement delivery for warranty reasons does not
result in general extensions of the original warranty period.
Any claims for compensation beyond this are excluded.