Sister Bay 17-1-10-11 User manual

CARE & MAINTENANCE: To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners or ask your Sales Representative about
Sister Bay Furniture Cleaner. Please contact our Customer Service Department for assembly assistance, questions or replacement parts at [phone] or email
[email protected]. Our Customer Service Department is available Monday-Friday 8:30 a.m. to 4:30 p.m. CST
2
HDPE
WARNING:
Using power tools may result in overtourqing screws causing threads to strip. We
are not responsible for replacements on parts where power tools where used.
HARDWARE:
PARTS:
30x
0-2995
1/4 x2"
1x
Allen Wrench
1x
17-1-10 Frame
Center Asm
1x
17-1-10 Frame
Right Asm
1x
17-1-10 Frame
Left Asm
1x
17-10 Back Asm
1x
17 Seat Asm
2x
17 Rail F&B
1x
17-10-11 Arm
Left Asm
1x
17-10-11 Arm
Right Asm
MODEL No: 17-1-10-11
Collection
48" Bench W/ Back & Arms.

1 2
A
DETAIL A
B
DETAIL B
Have [2x] Screws and Allen Wrench within reach for step 1B. A.
Put 17 Rail F&B into 17-1-10 Frame Left Asm Slots. B.
Start fastening [2x] screws through frame into rail, leave loose . C.
Repeat steps 1B-1C for the other rail. D.
Repeat Step 1 for 17-1-10 Frame Right Asm A.
MODEL No: 17-1-10-11
Collection
48" Bench W/ Back & Arms.

3 4
C
DETAIL C
D
E
DETAIL D
DETAIL E
(Seat Slats Not Shown)
Rotate 17-1-10 Frame Center Asm into center of rails, so the rails fit into the A.
slots, and holes line up.
Fasten [4x] screws through rail into frame, fully tighten (DETAIL C). B.
Set 17 Seat Asm onto 17-1-10 Frame Center Asm & the slats should fit into the A.
grooves on the left and right frame.
Fasten left & right frames to seat with [4x] screws; keep loose . B.
Fasten center frame to seat from underside (DETAIL E) with [2x] screws; fully C.
tighten.
MODEL No: 17-1-10-11
Collection
48" Bench W/ Back & Arms.

5 6
F
G
Set 17-10 Back Asm into slot on center frame. A.
Fasten into place with [6x] screws, 2 screws per frame (DETAIL F). B.
Next fully tighten all screws from steps 1, 2, and 4 . C.
Attach 17-10-11 Arm Left Asm to frame with [3x] screws. A.
Attach the other Arm to frame with the last [3x] screws. B.
DETAIL F
DETAIL G
(SLATS HIDDEN)
H
DETAIL H
MODEL No: 17-1-10-11
Collection
48" Bench W/ Back & Arms.

FINAL STEP:
Find the nearest person or animal
and have them admire your job well done!
MODEL No: 17-1-10-11
Collection
48" Bench W/ Back & Arms.