Sister Bay MHUD-DT60B User manual

SOCKET HEAD WRENCH
( not included )
Do not use
any hand drill
on this product
PHILLIPS SCREWDRIVER
( not included )
WRENCH
( not included )
1- After laying out all components, place one Leg (H) upright as shown below. Insert a Bolt ( A ) through the
Aluminum Frame and through the slots in the topside of the Legs. Secure in place with a Washer ( B ), a Split Lock
Washer ( B1 ), and a Hex Nut ( C ). With all 4 Bolts secured, attach the second Leg using the same procedure.
Figure 1
Hardware and Parts
(12)
2.75
B
(4)
C
(12)
(12)
A
(12)
B1
(4)
E
ALLEN WRENCH
( included )
D
G
( Top )
H
( Leg)
I
( Support )
J
( Stretcher )
C
B1BA
(4)
F
2.75
2.50
Item No: MHUD-DT60B
Hudson Cocktail Table
Assembly Instructions

3 - Finalize the assembly of table by attaching the Stretcher ( J ). Align the predrilled holes on the end of the Stretcher
with the holes as shown below of the Legs and fasten with 2 Connector Lag Screws ( E ). Continue tightening until
the bottom of the screw head is flush with the legs. Repeat on the other side. Finally, tighten the Bolts connecting
the Support to the Top which were assembled in the first part of step 2.
Figure 3
2 - Place and align the Support ( I ) with the aluminum support holes in the Table Top ( G ). The top of the Supports
have slots cut in them for ease of assembly. Using (2) Connector Bolts (A), loosely attach the Supports to the
Table Top. Use the Allen Wrench to hold the bolt, place a Washer (B), Split Lock Washer (B1) and secure with a
Hex Nut (C), assembly shown in detail below. To assist in assemble, we will wait to tighten them until the final step.
Now, secure the Legs to the Support by driving a Screw ( D ) through the clearance hole in the Leg into the
predrilled pilot hole in the Support. Continue driving the screw until it has bottomed out on the pocket. Once the
screw is completely inserted, cover it with the enclosed Plugs ( F ). Repeat step 2 for the other side.
Figure 2
D F
B
B1
CA
E
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST