Sunnydaze Decor Carnlough Chair User manual

CARNLOUGH OUTDOOR CHAIR
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

Page 1 / 2Adirondack Chair
Step 1
Align the holes on Left Leg (6) with the pre-drilled
holes on the bottom of Left Arm (1).
Hand-tighten 2x Screw (8) to secure pieces.
Step 2
Align the holes on Right Leg (5) with the pre-drilled
holes on the bottom of Right Arm (2).
Hand-tighten 2x Screw (8) to secure pieces.
NOTE: Do not fully tighten bolts until the chair is fully assembled.
CHOKING HAZARD — This item contains
small parts that can be swallowed. Keep children
away during assembly.
ASSEMBLY
04/2020
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerser[email protected], or via our contact us page at https://tiny.cc/SunnydazeContact
  
1Left Arm 1
2Right Arm 1
3Seat Panel 1
4Backrest 1
5Right Leg 1
6Left Leg 1
7M6 x 30mm Bolt 12
8Screw 4
9Hex Key 1
10 Screwdriver 1
1
8
6
8
5
2

04/2020 Page 2 / 2Adirondack Chair
USE & CARE
• To clean, wipe down with a damp cloth. Do not pressure-wash, use harsh chemicals or abrasive materials when cleaning.
• Cover with a breathable cover when not in use and store indoors during freezing weather.
• Inspect hardware before each use, tighten if necessary.

Step 5
Connect the right Arm assebly to the seat by hand-
tightening 3x Bolt (7).
The backside of the arm should be on top of the
backrest, as shown.
Step 6
Secure the arms to backrest by hand-tightening
1x Bolt (7) on each side.
Tighten all bolts using Hex Key (6).
7
7
7
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


Step 3
Align the pre-drilled holes on the backside of Backrest
(4) with the pre-drilled holes on the backside of Seat
Panel (3).
Hand-tighten 4x Bolt (7) to secure pieces.
Step 4
Connect the left arm assembly the seat by hand-
tightening 3x Bolt (7).
The backside of the arm should be on top of the
backrest, as shown.
3
4
7
7
7