Skidee X3M User manual

Rider's
Guide

Congrats on your purchase!
Now, your journey begins.
This X3M Scooter from Skidee is ready to roll straight out of the box—
perfect for children, teens, and the young at heart. Folding and unfolding
is quick and easy for lightweight, compact storage.
To ensure you can always go the extra mile (and the extra smile!), the X3M
is built to last with top-quality materials and construction.
Safety is fun: Always Wear
Protective Gear on Every Ride!
You’re on a roll...
Parts & Features
What’s included:
Do not use on jump
ramps or slopes.
Do not use on road
or bumpy surfaces.
Do not use at night
or near water.
What you’ll need:

Note:
Before using your scooter, remove the disposable handle-lock wedge from the handle lock
and dispose. The disposable handle-lock wedge is designed for damage prevention and
safety purposes while shipping and should not be kept on the scooter during use.
Unfold the scooter until you
hear a click.
Place one foot in the center of
the scooter, use the other foot to
accelerate.
Make sure friction brake is flush with
wheel when pressed.
Scoot!
Quick Start
Zip it!
Your fun, nimble ride is good to go places!
1
3
2
4

How to:
Unfold
How to:
Raise the handlebar
Open release lever #1.
Open release lever #2.
Close release lever #1.
Press folding button
Grasp handlebars and push the
popping ball and move up or down to
adjust handlebar height.
Open T-section lock: Press down
the 2 handlebar lock buttons. Insert
handlebar grips into the slots on the
T-section of the handle.
Grasp handlebar stem and lift into
upright position until it clicks into
place.
Close release lever #2.
Turn the handlebar grips until they
click into place. Close T-section lock.
1
1
4
2
2
5
3
3
6

How to:
Do Safety Check
How to:
Roll
Make sure all levers are securely
fastened.
Put on protective equipment
Press foot down on the friction brake
to slow down or stop.
Make sure handlebars and wheels are
stable and in good condition.
Stand with one foot evenly-spaced in
the center of the scooter board and
both hands on handlebars.
Press on the friction brake to ensure a
solid connection with back wheel.
Swipe free foot across the ground to
accelerate.
1
1
4
2
2
3
3

How to:
Fold your scooter
Open release lever #2.
Press down the 2 handlebar lock
buttons. Pull handlebar grips out of
slots and hang on adjacent brackets
for storage.
Close release lever #1.
Grasp handlebars and push the
popping ball and move down the
handlebar to the lowest height.
Open release lever #1.
Close release lever #2.
Grasp handlebar stem and fold it
toward back wheel until it clicks into
place.
1
4
7
2
5
3
6
Note:
If your scooter gets dirty, wipe it down with a damp
or dry cloth. Do not use harsh cleaners or abrasive
cleaning tools.

Wheels become worn or uneven
Handlebar doesn’t click in properly
Scooter clicks in but the fold button
is not working
Replace with new wheel
using toolkit.
New wheels, bolts, and
spacers are available
directly from Skidee.
Place your foot towards
the end of the deck and
on the brake and use
full body power to force/
thrust the handlebar into
the upright position until
you hear the click
loosen the screws
behind the fold button
just a bit. For optimal
tension the screws
should be about 2
threads visible at the
top of each screw.
Important:
If you continue to experience issues with your scooter, please discontinue use and
contact Skidee Customer Support.
When things skid to a stop!
Troubleshooting guide
If this happens... Do this...

When there’s trouble on the horizon...
We treat every Skidee
customer like a high roller!
Phone
1.806.475.4333
Address
1387 Church rd #B
Toms river, N.J.
08755
Website
skidee.net/support
Email
[email protected]