Jetson NEO User manual

NEO
KIDS ELECTRIC LIGHT-UP SCOOTER

TABLE OF CONTENTS
What’s in the Box 1
Features & Specs 2
Assembly 3
Charging the Battery 4
Adjusting the Handlebar 5
Turning the Neo On and Off 6
Riding the Neo 7
Using the Deck Sensor 8
Using the Brake 9
Care and Maintenance 10
Safety Warnings 11

1. WHAT’S IN THE BOX
3
2
1
56
8
7
9
1. HANDLEBAR
2. LED LIGHT-UP STEM
3. FRONT WHEEL
4. POWER BUTTON
5. LED LIGHT-UP DECK
6. REAR FOOT E-BRAKE
7. MOTOR
8. REAR WHEEL
9. CHARGER
4

2. FEATURES & SPECS
• Weight Limit: 135 lbs.
• Product Weight: 11 lbs.
• Recommended Age: 8+
• Tire Size: Front - 5”; Rear - 3.5”
• Max Speed: Up To 6 mph
• Max Range: Up To 6 Miles
• Battery: 24V, 1.54Ah Lithium-Ion
• Motor: 120W Hub Motor
• Charger: UL 110-240V
• Charge Time: Up To 3 Hours
• Climbing Angle: Up To 15°
• Deck Size: 21” x 4.5”
• Frame: Aluminum Alloy

3.1
Slide down
3. ASSEMBLY
3.2
Then run
the Bolt
through
the Clamp
Tighten
Bolt
Carefully
tuck
excess wire
in tube

4. CHARGING THE BATTERY
A few must-do’s:
• Only use the included charger
• Plug the charger into the wall before the Charging Port
• Don’t turn on the Neo while it’s charging (it needs its rest)
• Charge the battery until it is fully charged, and no longer
• Cover the Charging Port when you are done
• Remember to have fun!
Charging Port

5. ADJUSTING THE HANDLEBAR
5.1 5.2
5.3
Open the
Stem Clamp
Press in
Lift (or lower)
Handlebar
Then close
Stem Clamp
to lock
Wait
until it
clicks

6. TURNING THE NEO ON AND OFF
Power Button
- Press the Power Button to turn the Neo on.
- Press the Power Button again to turn the Neo off.

7. RIDING THE NEO
- Place one foot in front.
- Place the other foot in back, at a 70-90° angle.
- Turn the Handlebar to the left or right to make turns.

8. USING THE DECK SENSOR
-The Neo is kick motion activated, you will need to push
forward with one foot before using the motor.
- Once in motion, the Deck Sensor activates the motor which
propels the Neo up to 6 mph.