Skil Masters 7120 User manual

SKIL Europe BV - Konijnenberg 60 02/11 2610Z02140
4825 BD Breda - The Netherlands
DELTA SANDER
7120 (F0157120..)
www.skilmasters.com
ME77
 ORIGINAL INSTRUCTIONS 5
NOTICE ORIGINALE 7
ORIGINALBETRIEBSANLEITUNG 10
 ORIGINELE GEBRUIKSAANWIJZING 13
BRUKSANVISNING I ORIGINAL 17
 ORIGINAL BRUGSANVISNING 19
ORIGINAL BRUKSANVISNING 22
 ALKUPERÄISET OHJEET 25
MANUAL ORIGINAL 28
MANUAL ORIGINAL 31
ISTRUZIONI ORIGINALI 34
EREDETI HASZNÁLATI UTASÍTÁS 37
 PŮVODNÍM NÁVODEM K POUŽÍVÁNÍ 40
 ORİJİNAL İŞLETME TALİMATI 43
 INSTRUKCJA ORYGINALNA 46
 ПОДЛИННИК РУКОВОДСТВА
ПО ЭКСПЛУАТАЦИИ 49
 ОРИГІНАЛЬНА ІНСТРУКЦІЯ
З ЕКСПЛУАТАЦІЇ 53
 ΠΡΩΤΟΤΥΠΟ Ο∆ΗΓΙΩΝ ΧΡΗΣΗΣ 56
 INSTRUCŢIUNI DE FOLOSIRE
ORIGINALE 60
 ОРИГИНАЛНО РЪКОВОДСТВО
ЗА ЕКСПЛОАТАЦИЯ 63
 PÔVODNÝ NÁVOD NA POUŽITIE 67
 ORIGINALNE UPUTE ZA RAD 70
 ORIGINALNO UPUTSTVO ZA RAD 72
 IZVIRNA NAVODILA 75
 ALGUPÄRANE KASUTUSJUHEND 78
 ORIĢINĀLĀ LIETOŠANAS PAMĀCĪBA 81
 ORIGINALI INSTRUKCIJA 84
 92
 90

2
17120
ʾƓˀÿ
ʽʾƯʿʽʽˀ
¹ÌÌ
ˀʽʽ




Ɩ
Ɩ
˃
ʾ




2
3
ʿˀʽ
Ƙ
ʿˁʽ
˃ʽʽʽƘʾʾʽʽʽ
Ư
ˆˀÅÅ

3
4



5

4
8
6
7
ACCESSORIES SKILnr.
2610399400

5

Deltasander 7120
INTRODUCTION
• This tool is intended for dry sanding and nishing of
wood, painted surfaces, plastic, metal and ller; it is
particularly suitable for working on edged, narrow and
other hard-to-reach places
• Read and save this instruction manual 3
TECHNICALSPECIFICATIONS1
TOOLELEMENTS2
A Dust box
B Vacuum cleaner adapter
C Knob for removing dustbox
D On/o switch
E Sanding speed selection wheel
F Ventilation slots
G Storage for key
H Extra foampad
SAFETY
GENERALSAFETYINSTRUCTIONS
WARNING!Readallsafetywarningsandall
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury. Saveall
warningsandinstructionsforfuturereference. The term
“power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1)WORKAREASAFETY
a) Keepworkareacleanandwelllit. Cluttered or dark
areas invite accidents.
b) Donotoperatepowertoolsinexplosive
atmospheres,suchasinthepresenceofflammable
liquids,gasesordust. Power tools create sparks which
may ignite the dust or fumes.
c) Keepchildrenandbystandersawaywhileoperating
apowertool. Distractions can cause you to lose control.
2)ELECTRICALSAFETY
a) Powertoolplugsmustmatchtheoutlet.Nevermodify
thepluginanyway.Donotuseanyadapterplugs
withearthed(grounded)powertools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b) Avoidbodycontactwithearthedorgrounded
surfacessuchaspipes,radiators,rangesand
refrigerators.There is an increased risk of electric
shock if your body is earthed or grounded.
c) Donotexposepowertoolstorainorwetconditions.
Water entering a power tool will increase the risk of
electric shock.
d) Donotabusethecord.Neverusethecordfor
carrying,pullingorunpluggingthepowertool.Keep
cordawayfromheat,oil,sharpedgesormoving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) Whenoperatingapowertooloutdoors,usean
extensioncordsuitableforoutdooruse. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) Ifoperatingapowertoolinadamplocationis
unavoidable,useanearthleakagecircuitbreaker.
Use of an earth leakage circuit breaker reduces the risk
of electric shock.
3)PERSONALSAFETY
a) Stayalert,watchwhatyouaredoinganduse
commonsensewhenoperatingapowertool.Donot
useapowertoolwhileyouaretiredorunderthe
influenceofdrugs,alcoholormedication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Usepersonalprotectiveequipment.Alwayswear
eyeprotection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Preventunintentionalstarting.Ensuretheswitchis
intheoff-positionbeforeconnectingtopower
sourceand/orbatterypack,pickinguporcarrying
thetool. Carrying power tools with your nger on the
switch or energising power tools that have the switch on
invites accidents.
d) Removeanyadjustingkeyorwrenchbeforeturning
thepowertoolon. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e) Donotoverreach.Keepproperfootingandbalance
atalltimes. This enables better control of the power tool
in unexpected situations.
f) Dressproperly.Donotwearlooseclothingor
jewellery.Keepyourhair,clothingandglovesaway
frommovingparts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) Ifdevicesareprovidedfortheconnectionofdust
extractionandcollectionfacilities,ensuretheseare
connectedandproperlyused. Use of dust collection
can reduce dust-related hazards.
4)POWERTOOLUSEANDCARE
a) Donotforcethepowertool.Usethecorrectpower
toolforyourapplication. The correct power tool will do
the job better and safer at the rate for which it was designed.
b) Donotusethepowertooliftheswitchdoesnotturn
itonandoff. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnecttheplugfromthepowersourceand/or
thebatterypackfromthepowertoolbeforemaking
anyadjustments,changingaccessories,orstoring
powertools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Storeidlepowertoolsoutofthereachofchildrenand
donotallowpersonsunfamiliarwiththepowertoolor
theseinstructionstooperatethepowertool. Power
tools are dangerous in the hands of untrained users.
e) Maintainpowertools.Checkformisalignmentor
bindingofmovingparts,breakageofpartsandany
otherconditionthatmayaffectthepowertool’s
operation.Ifdamaged,havethepowertoolrepaired
beforeuse. Many accidents are caused by poorly
maintained power tools.

6
f) Keepcuttingtoolssharpandclean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Usethepowertool,accessoriesandtoolbitsetc.,
inaccordancewiththeseinstructions,takinginto
accounttheworkingconditionsandtheworktobe
performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
5)SERVICE
a) Haveyourpowertoolservicedbyaqualifiedrepair
personusingonlyidenticalreplacementparts. This
will ensure that the safety of the power tool is maintained.
SAFETYINSTRUCTIONSFORSANDERS
GENERAL
• This tool should not be used by people under the age of
16 years
• This tool is not suitable for wet sanding
• Never use the tool when cord is damaged; have it
replaced by a qualied person
• Donotworkmaterialscontainingasbestos
(asbestos is considered carcinogenic)
• Alwaysdisconnectplugfrompowersourcebefore
makinganyadjustmentorchanginganyaccessory
ACCESSORIES
• SKIL can assure awless functioning of the tool only
when the correct accessories are used which can be
obtained from your SKIL dealer
• Do not continue to use worn, torn or heavily clogged
sanding sheets
BEFOREUSE
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating of 230V or 240V can also be connected to a
220V supply)
• Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
• Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
• The noise level when working can exceed 85 dB(A);
wear ear protection
• Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders); wearadustmaskandworkwithadust
extractiondevicewhenconnectable
• Certain kinds of dust are classied as carcinogenic (such
as oak and beech dust) especially in conjunction with
additives for wood conditioning; wearadustmaskand
workwithadustextractiondevicewhenconnectable
• Follow the dust-related national requirements for the
materials you want to work with
• Wear protective gloves, safety glasses, close-tting
clothes and hair protection (for long hair)
• Securetheworkpiece (a workpiece clamped with
clamping devices or in a vice is held more securely
than by hand)
• When sanding metal, sparks are generated; do not use
dustbox/vacuum cleaner and keep other persons and
combustible material from work area
DURINGUSE
• Always keep the cord away from moving parts of the tool;
direct the cord to the rear, away from the tool
• Do not touch the moving sanding sheet
• In case of electrical or mechanical malfunction,
immediately switch o the tool and disconnect the plug
• If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
AFTERUSE
• When you put away the tool, switch o the motor and ensure
that all moving parts have come to a complete standstill
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
• If for any reason the old plug is cut o the cord of this tool,
it must be disposed of safely and not left unattended
USE
• Mounting of sanding sheet 4
! disconnecttheplug
! thedustsuctionrequirestheuseofperforated
sandingsheets
! perforationinsandingsheetshouldcorrespond
withperforationinsandingfoot
! replacewornsandingsheetsintime
- always use the orange foam pad (which is subject to
wear and tear and as such excluded from the warranty)
! alwaysusethetoolwiththetotalsandingsurface
coveredwithsandingpaper
- knock the dust out of the VELCRO material on the
orange foam pad before mounting the sanding sheet
- mount VELCRO sanding sheet as illustrated
• Dust suction 5
- mount dustbox A/vacuum cleaner adapter B by sliding
it onto tool as illustrated until it snap-locks
- remove dustbox A/vacuum cleaner adapter B by
pressing knob C and hold it in that position while
pulling dustbox/vacuum cleaner adapter backwards
- empty dustbox A regularly for optimal dust pick-up
performance
! donotusedustbox/vacuumcleanerwhen
sandingmetal
• On/o
- switch on/o the tool by pushing switch D 2
forward/backwards
! beforethesandingsurfacereachesthe
workpiece,youshouldswitchonthetool
! beforeswitchingoffthetool,youshouldliftit
fromtheworkpiece
• Speed control
For optimal sanding results on dierent materials
- with wheel E 2 you can set the desired sanding speed
- before starting a job, nd the optimal speed and grit by
testing out on spare material
• Holding and guiding the tool
! whileworking,alwaysholdthetoolatthe
grey-colouredgriparea(s)6
- guide the tool parallel to the working surface
! donotapplytoomuchpressureonthetool;let
thesandingsurfacedotheworkforyou
- do not tilt the tool in order to avoid unwanted sanding marks
- keep ventilation slots F 2 uncovered

7
APPLICATIONADVICE
• When the foampad of the delta-tip is worn or damaged at
the top, you may extend its service life twice by turning it
120° (also applicable to delta sanding sheet) 7
• Never use the same sanding sheet for wood and metal
• Recommended sanding sheet grits:
coarse - for removing paint; for sanding of
extremely rough wood
medium - for sanding of rough or plain wood
ne - for smoothing of wood; for nishing of
bare wood; for smoothing surfaces with
old paint
• Use dierent grit sizes when the working surface is rough:
- start sanding with coarse or medium grit
- nish with ne grit
MAINTENANCE/SERVICE
• Always keep tool and cord clean (especially ventilation
slots F 2)
- remove adhering sanding dust with a brush
! disconnecttheplugbeforecleaning
• If the tool should fail despite the care taken in manufacturing
and testing procedures, repair should be carried out by an
after-sales service centre for SKIL power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skilmasters.com)
ENVIRONMENT
• Donotdisposeofelectrictools,accessoriesand
packagingtogetherwithhouseholdwastematerial
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 8 will remind you of this when the need for
disposing occurs
DECLARATIONOFCONFORMITY
• We declare under our sole responsibility that this product
is in conformity with the following standards or
standardized documents: EN 60745, EN 61000,
EN 55014, in accordance with the provisions of the
directives 2006/95/EC, 2004/108/EC, 2006/42/EC
• Technicalfileat: SKIL Europe BV (PT-SEU/PJE),
4825 BD Breda, NL
ÊÆÇιÆ¼½ÊÄÇÇÌ
Á»½ʽËÁ¼½ÆÌ
ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿
ÍÊÇȽƓˁ˅ʿ˂ʽ¼¹Ɠ
¹ÆÊÇÅŽĽÆ
ÈÈÊÇιÄ¹Æ¹¿½Ê
02.02.2011
NOISE/VIBRATION
• Measured in accordance with EN 60745 the sound
pressure level of this tool is 82 dB(A) and the sound
power level 93 dB(A) (standard deviation: 3 dB),
and the vibration 5.3 m/s² (hand-arm method;
uncertainty K = 1.5 m/s²)
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60745;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for dierent applications, or with dierent
or poorly maintainted accessories, may signicantly
increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! protectyourselfagainsttheeffectsofvibration
bymaintainingthetoolanditsaccessories,
keepingyourhandswarm,andorganizingyour
workpatterns

Ponceusedelta 7120
INTRODUCTION
• Cet outil sert au ponçage et au polissage à sec du bois,
des surfaces peintes, du plastique, métal et mastic; il se
prête notamment à l’usinage des bords et des endroits
étroits et d’accès dicile
• Lisez et conservez ce manuel d’instruction 3
SPECIFICATIONSTECHNIQUES1
ELEMENTSDEL’OUTIL2
A Réservoir à poussière
B Adaptateur de l’aspirateur
C Bouton de retrait du réservoir à poussière
D Interrupteur marche/arrêt
E Molette de réglage de la vitesse de ponçage
F Fentes de ventilation
G Rangement pour la clé
H Coussinet de mousse supplémentaire
SECURITE
INSTRUCTIONSGENERALESDESECURITE
ATTENTION!Liseztouslesavertissementsde
sécuritéettouteslesinstructions. Ne pas suivre les
avertissements et instructions peut entraîner un choc
électrique, un incendie et/ou de graves blessures sur les
personnes. Conserveztouslesavertissementsettoutes
lesinstructionspourpouvoirs’yreporter
ultérieurement. La notion d’”outil électroportatif” dans les
avertissements se rapporte à des outils électriques raccordés
au secteur (avec câble de raccordement) et à des outils
électriques à batterie (sans câble de raccordement).