Skimz BR100 User manual

BIOPELLET REACTOR
QUICK INSTALLATION GUIDE
BR100
Model Feed Pump Body
Diameter (mm)
Biopellet
Media For Aquarium
BR80
BR100
WT900
WT1200
80
100
up to 400ml
up to 1,000ml
up to 400 L
up to 1,000 L
Code
8121-00
8122-00
English
Thank you for purchasing your new SKIMZ Biopellet Reactor that provides optimum performance with
maximum safety and reliability.
MAINTENANCE
It is recommended to clean the reactor when new media is replaced. The feed pump and water inlet control
valve should be cleaned to ensure that it does not blocked with debris from the tank or calcium deposits.
WARRANTY POLICY
Skimz Singapore LLP (Company) warrants this product to the original purchaser against defective material
and workmanship that occurs during normal use of the body for two (2) years and one (1) year warranty on
the pump. Company will, at Company’s option, either repair or replace without charge.
PRODUCTS COVERED BY WARRANTY
All Skimz equipment is covered by warranty from the date of purchase.
To be eective, register your product at: www.skimz.sg/support/register.html within 14 days of the product’s
purchase date.
Exclusions:
Damage resulting from accident, misuse, lack of reasonable care, subjecting the product to abnormal working
conditions or any other failure not resulting from defects in materials or workmanship.
Damage caused by tampering, modication or attempted repair by anyone other than the Company.
Transfer of product to someone other than the original purchaser.
Bring the product to your nearest Skimz dealer or ship the product, together with a copy of the purchase
receipt or other evidence of purchase to:
Skimz Singapore LLP
5 Ang Mo Kio Industrial Park 2A
#04-30 AMK Tech II
Singapore 567760
You must pay any postage, shipping charges, insurance costs and other expenses to return the product to
Skimz. However, if the necessary repairs are covered by the warranty, Company will pay the return shipping
charges.
8070-11 © 2014 Skimz

A. Thumbscrew
B. Lid
C. Reactor media
D. Dispersion cone
E. Quick release coupling
F. Water outlet valve
G. Outlet hose
H. Feed pump
I. Sponge (only when using it as uidized reactor)
skimz.sg | [email protected] skimz.sg | [email protected]
1. Open the lid by removing the thumbscrews anticlockwise.
2. Fill the reactor with required volume of media and reattach
the lid.
STEP 1
1. Attach the exible hose to outlet of the reactor.
2. Connect the pump to inlet of the reactor.
STEP 2
When using BR100 as uidized Reactor
1.
Inset one sponge at bottom and one at the top inside the
cylinder body.
2. Can be used with phosphate media or activated carbon.
STEP 4
When using BR100 as uidized Reactor
1. Switch on the feed pump and open the valve slowly.
2. Adjust the ow rate until the media starts to uidize.
3. When uidizing media, we suggest that the ow must not
be too strong to avoid media disintegration. A general guide
is to provide sucient ow such that the surface of the media
are moving gently.
STEP 5
1. Position the reactor inside the sump.
2. Ensure the valve of the feed pump is closed and outlet hose
is in the sump tank.
3. Switch on the feed pump and open the valve slowly.
4. Adjust the ow rate until all the media is tumbling, so that it
will keep the media free of biolm.
STEP 3
Biopellet ReactorBiopellet Reactor