SKLZ Quickster Range Net User manual

RANGE NET IS PERFECT FOR:
» GOLF
RANGE NET
QUICKSTER®
Training Videos & Articles: SKLZ.com
facebook.com/SKLZgolf
twitter.com/golfSKLZ VISIT SKLZ.COM FOR INSTRUCTIONAL VIDEO AND CONTENT
INSTRUCTION MANUAL
INCLUDES:
» 6' x 6' Range Net
» Chipping target
» Carry bag
» Ground stakes (4)
Thank you for choosing SKLZ Quickster Range Net. We are dedicated to providing you with the best tools and instruction possible to help you unleash your athletic potential. If there is anything else we
can do to help you optimize your training, don’t hesitate to send us an email ([email protected]) or give us a call (1-877-225-7275).
BEFORE YOU BEGIN:
» Read all setup and usage instructions carefully before using. If the setup and/or instructions are not followed correctly, it could result in injury or damage to the product.
» Adult assembly required.
» Make sure you have all of the Range Net components. Please contact SKLZ customer service toll free at 877-225-7275 x128 if you are missing anything.
» When done, disassemble Range Net and store after use. Do not leave Range Net outdoors.
iWARNING:
» Quickster Range Net is under tension when assembled. Please take the utmost care when releasing the tension during disassembly.
Failure to do so may result in injury.
» To avoid pinching, use caution when assembling the push button tubing.
» Do not climb or hang on the Range Net or chipping target.
» Regularly check for wear and tear. Stop using net if any part of it breaks. Failure to do so could result in injury.
» Keep away from fire and heat sources.
» Not suitable for children under 3 years of age.
QUICKSTER RANGE NET PARTS:
QUICKSTER®
BASE FRAME
B
NET
A
REMOVABLE CHIPPING TARGET
E
GROUND STAKES
D
TENSION-TITE™ARM POLES (2)
C
PRACTICE NET
REMOVABLE
CHIPPING TARGET
A
E
TENSION-TITE™ARM POLES
C
BASE FRAME
B
RangeNet_6x6_Instr_11X17_sV2.indd 1 10/31/13 5:32 PM

LIMITED
WARRANTY
REGISTER YOUR PRODUCT AT SKLZ.COM
TO ENSURE WARRANTY
COVERAGE, GET NEW PRODUCT
INFORMATION AND SPECIAL DEALS
FROM SKLZ
Pro Performance Sports (PPS) / SKLZ warrants to the original consumer purchaser of any
PPS/SKLZ product it manufactures that the product will be free of defects in materials or
workmanship for 90 days (unless specified in alternate warranties) from the date of purchase.
If defective and purchased from a retail store, return the product along with receipt to the
retail store where the product was purchased. If the item was purchased from PPS/SKLZ,
return the product along with the packing slip (proof of purchase) postage prepaid to the
address below for replacement consideration. Label: Attn: Returns
This warranty does not cover damages resulting from accident, misuse, abuse or lost
merchandise. Only valid in the USA. All returns sent to PPS/SKLZ require a Return
Merchandise Authorization number (RMA). For returns to PPS/SKLZ and for all other
Customer Service inquiries, please email [email protected] or call toll free,
1-877-225-7275 for a return authorization number for any exchange.
Made in China. ©2013 Pro Performance Sports, LLC. All rights reserved. Manufactured and
distributed by SKLZ/Pro Performance Sports: 2081 Faraday Avenue, Carlsbad, CA 92008 U.S.A.
SKLZ, SKLZ Pro Grade, SKLZ Chrome and Sport-Brella are registered trademarks of Pro Performance
Sports, LLC., its subsidiaries and affiliates. Product features, appearance, and specifications may
be subject to change without notice. Unauthorized duplication is a violation of applicable local and
international laws.
IDEA SUBMISSION
If you have an idea for a new and innovative sports training product,
visit SKLZ.com to submit your concept. Some restrictions may apply.
PATENT #
US 8,246,496
ASSEMBLY
SKLZ.COM
Top Attachment
fabric loop
RANGE NET
PUSH-BUTTON ATTACHMENT
STEP 1
BASE FRAME & TENSION-TITE ARM POLE
NOTE: Base Frame and Tension-Tite Arm Poles
come pre-attached by elastic cords.
1– Lay out one Tension-Tite Arm Pole (C) and link it
together to form a straight pole. Repeat with the
second Tension-Tite Arm Pole.
2 – Lay out the Base Frame (B) and link it together. Make
sure to secure the poles with the push-buttons.
WARNING: To avoid pinching, use caution when
using the push-buttons.
NOTE: The slight bowing of the Base Frame is part
of the Tension-Tite system design.
3 – Slide the Tension-Tite Arm Poles into each side of
the Base Frame.
NOTE: Ensure the arm poles are fully inserted.
Failure to do so may result in damage to the
Quickster Net.
C
STEP 2
CONNECT THE PRACTICE NET TO THE FRAME
1 – Unfold the Practice Net (A) and make sure that the
Quickster logo on the net is facing away from the
frame. Connect the net loops on the bottom of the net
to each side of the frame.
2– Slide the pin at the top of the net into the top of the
Tension-Tite Arm Pole. Repeat on the other side.
NOTE: Check the frame to make sure it is fully and
securely setup with the net before securing the
frame to the ground.
1
1
1
2
2
2
B
C
C
LOOP ATTACHMENT B
A
A
A
STEP 3
ATTACH STRIKE ZONE TARGET (optional)
Unfold the Target (E) and find the top straps (these have adjustment buckles on them). Attach a hook of the top
strap through the fabric loop in the top corner of the net. Repeat on the other side.
E
SIDE
STEP 4
SECURE THE QUICKSTER
Place Quickster in the desired location and ensure it is on
level ground. Secure frame with included Ground Stakes
(D). Ground Stakes can be secured with hand or foot.
NOTE: Do not use Ground Stakes on the back of
the base frame. Poles will bend and tension
system will not function properly. Care should
be taken when pressing in the Ground Stakes.
Poles can be bent if driven too far into the
ground or hard surface.
WARNING: Make sure the Quickster is secured into
the ground before play. During play,
make sure the Ground Stakes are secured
as a loose Ground Stake may cause injury.
ONLY SECURE STAKES WHERE INDICATED ABOVE.
Remove the target, fold up and place into the carry bag. Remove the ground stakes and
place them into the carry bag.
WARNING: Quickster is under tension when set up. Please take the utmost care when
releasing the tension during disassembly. Failure to do so may result in injury.
Hold one pin in one hand and one Tension-Tite Arm Pole in the other while pulling the
pin out. Repeat on the other side. Remove the net loop attachments from each side of
the frame. If needed, air-dry the net before you fold and place it into the carry bag. Pull
the Tension-Tite Arm Poles out of each side of the Base Frame and unlink and fold them
down to store.
NOTE: Store Tension-Tite Arm Pole in the carry bag with the round tops facing away
from each other.
Unlock the push-buttons on the Base Frame to unlink the frame. Fold and store in
carry bag.
STORING YOUR QUICKSTER®
RangeNet_6x6_Instr_11X17_sV2.indd 2 10/31/13 5:32 PM