Skyrc eFUEL 60A User manual

Cooling
Fan
AC Power
Input Socket
Power
Switch
AC INPUT
200-240V OFF
ON
Temp. Controlled Fan
CAUTION:
Check the AC Voltage
Before POWER ON
INTRODUCTION
Thank you for purchasing the eFUEL 60A
Switching DC Power Supply. We are
confident that you will be very pleased with
its performance because our Switching DC
Power Supply is designed and manufactured
by skilled professionals using the highest
standard in workmanship. You can be assured
of many years of trouble free service.
GENERAL DESCRIPTION
Your eFUEL switching DC Power Supply is
designed to use household AC power source
to power equipments that required DC power.
The eFUEL converts standard household
power 100-120V AC or 200-240V AC to 15-24V
DC power and can supply up to 60 amperes of
continuous power.
The maximum output current is regulated by the
output power of this power supply and does not
exceed 60 Ampere. Maximum Current = 1200W
divide by output voltage. ( eg. DC20V output,
maximum current = 1200W / 20V = 60A; DC24V
output, maximum current = 1200W / 24V = 50A.)
FEATURES
* One main DC power outputs, up to 60 amperes,
three output channels with ON/OFF switch.
* Output voltage adjustable 15-24V
* Large LCD indicates voltage and current
amperes output
* Smart cooling fan
* Over temperature protection
* Over loading protection
* Short circuit protection
IMPORTANT SAFETY INSTRUCTIONS
Danger: To reduce the risk of fire or electric
shock, carefully follow these instructions.
This manual contains important safety and
operating instructions for this power supply.
Before you use the power supply, read all
the instructions and cautionary markings in
this manual, on the power supply, and on
the product that you will connect to the
power supply, to reduce the risk of injury:
Caution: To reduce the risk of damage:
Do not operate the power supply if it has been
dropped or damaged in any way. Take it to a
qualified service technician for repair.
The power supply should be operated only from
a standard AC outlet that provides 100 - 120V
AC(Part No. PSU60ADU) or 200 -240V AC
(Part No. PSU60ADE),50/60 Hz. If you are not
sure of the type of power supplied to your home,
consult your local powercompany.
To protect the power supply during a lightning
storm or when it is left unattended and unused
for long periods of time, unplug it from the AC
outlet. This will prevent damage to the power
supply from lightning and power surges.
Unplug the power supply from the outlet before
attempting any maintenance or cleaning. Do
not use liquid or aerosol cleaners. Use a damp
cloth for cleaning and then wipe it dry
immediately.
1
Do not use the power supply near water (for
example, a bathtub, washbowl, kitchen sink,
laundry tub, wet basement, or swimming pool).
Do not place the power supply on an unstable
cart, stand or table. If the power supply falls,
it could injure a person or cause serious
damage to the power supply.
Do not overload power outlets or extension
cords. An overload can result in fire or electric
shock.
Do not disassemble this unit; take it to a
qualified service technician when service or
repair is required. Improper reassembly may
result in a risk of electric shock or fire.
Do not use an attachment not recommended,
this could result in a risk of fire , electric shock,
or injury to persons.
Never push any object into the slot in the power
supply. It could touch dangerous voltage points
or short out parts resulting in a fire or electrical
shock.
If your power supply does not operate normally,
in particular if any unusual sounds or smells
come from it, unplug it immediately and contact
a qualified service technician for repair.
CONNECTIONS
Caution: Make all other connections
before you connect the power supply to
standard AC power
1. Turn the sleeves of the red and black binding
output posts counterclockwise to expose the
wire hole.
2. Insert the device's positive wire (usually red)
into the red binding post's wire hole, then
tighten the binding post's sleeve to secure
the wire in place.
3. Insert the device's negative wire (usually
black) into the black binding post's wire hole,
then tightening the binding post's sleeve to
secure the wire in place.
4. If you are using the banana plugs connection,
insert the plugs into the terminal's jack.
Warnings: To avoid damage to both the power
supply and the device:
Follow the correct polarity when connecting the
power supply and the device.
Do not let the ends of the positive and negative
wires touch each other.
To use the power supply after you connect the
device to it, set POWER to turn it on with the
power switch
OPERATION
Moving your power supply away from the
receiver.
Connecting your power supply to an outlet that
is on a different electrical circuit from the
receiver.
Contacting a qualified service technician for
help.
Caution: To reduce the risk of energy hazard,
be careful not to short the output terminal
during operation. Remove the output
connections after use.
Caution: Place your power supply in a well
ventilated open and cool area. Do not block the
openings at the fan suction on the side and the
discharge openings on the other side.
If the outlet has power, set POWER to OFF ,
reduce the load (by using a device that does
not require more than 60 amps), then set
POWER to ON. Your power supply's overload
protection circuit automatically shuts down the
power supply when it is overload and resets by
turning POWER to OFF .
Try to eliminate the interference by:
Caution: Your power supply might cause TV or
radio interference even when it is operating
properly. To determine whether your power
supply is causing the interference, turn off your
power supply. If the interference goes away,
your power supply is causing it.
2Main DC Output
(60A Max)
Cooling
Fan
Voltage Adjustment Dial (15V-24V)
Current &Voltage
Read Out
3 Channels with
ON/OFF Switch
60A SWITCHING DC POWER SUPPLY
1200WATTS
INSTRUCTION MANUAL
Please check all connections and confirm the
wall AC outlet has power before you switch on
the power supply.

63A
25
15
85%
305x140x78mm
2.52
65
15-24V DC 1V
SPECIFICATIONS
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
3
2012 SkyRC Technology Co., Ltd. All Rights Reserved. No part of these manual may be reproduced
without the written permission of SkyRC Technology Co., Ltd.
4
Part No.PSU60ADU,PSU60ADE
Printed in China.
PRODUCT WARRANT Y
The eFUEL 60A DC switching power supply is
guaranteed to be free from defects in materials
or workmanship for period of one year from the
original date of purchase (verified by dated,
itemized sales receipt). Warranty does not cover
incorrect AC voltage input, damage to case or
exposed circuit boards, disassembling case,
tampering with internal electronics, allowing
water, moisture, or any other foreign material to
enter this Power Supply or get onto the PC board,
incorrect wiring of output, allowing exposed
wiring to short circuit, or any damage caused by
crash, flooding, or act of God. Because SkyRC
has no control over the connection & use of the
power supply, no liability may be assumed nor
will be accepted for any damage resulting from
the use of this product. Every power supply is
thoroughly tested & burn-in before leaving our
factory and is, therefore, considered operational.
By the act of operating power supply, user
accepts all resulting liability. In no case shall our
liability exceed the product’s original cost. We
Warning:
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
WARNING: If the surface is cracked, switch
off the appliance to avoid the possibility of
electric shock.
For indoor use only.
reserve the right to modify warranty provisions
without notice.
Manufactured by
SKYRC TECHNOLOGY CO., LTD.
www.skyrc.com
305.00
140.00
74.00
140.00
78.00
Total Output Power 1200 Watts
60A +/- 3A @20V DC
50A +/- 3A @24V DC
Maximum Output Current
7504-0240-03
(PSU 60ADU)
(PSU 60ADE)