Skyworth LCD-26L16H User manual

Instruction Manual
LCD-26L16HLCD-26L16H
26" LCD TV/MONITOR

Thank you verymuch for yourpurchase of thisproduct-the most naturalColour
TelevisionReceiver.
Toenjoy your setto the fullfrom the verybeginning, read thismanual carefully andkeep
it handy forready reference.

-1-
Precautions when usingbatteries
Do not useold and new batteries together.
Do not usedifferent types of batteries (for example, Manganese and
Alkaline batteries) together.
Note that there are chargeable and non-chargeable batteries. Do not
attempt to charge non-chargeable batteries.
Remove the batteries from the remote control unit if you donot intend to use
the unit fora long time. Precautions when using the remote controlunit
Do not dropthe remote control unit.
Do not subject the remote control unit to physical shocks.
Keep the remote control unitdry. May cause the unit to malfunction.
Replace the batteries with new ones when operation of the unit deteriorates.
SETUPSETUP
Insert The Batteries
Remove the batterycover by pressing it and sliding it down.
Insert the two1.5V (AAA size) batteries making sure the polarity (+
or -)of thebatteries matches the polarity marks Insidethe unit.
Replace the batterycover by sliding it in until you hear aclick sound.
1
2
3
TV Installation

Locate the receiver in the room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable viewing.
Allow enough space between the receiver and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
This TV operates on AC supply directly, connect the AC plug to the socket at the back of the TV.
Insert the mains plug in the socket having a mains voltage of 100-240V AC.
Do not install the receiver in a location near heat sources such as radiator, air ducts, direct
sunlight, or in a place somewhere like close compartment and close area. Do not cover the
ventilation openings when using the set.
Features
Up to 200 programme memory.
.
Sleep timer.
picture modes.
When no TV signal is dectected, after 15
minutes the TV switches itself automatically
to stand-bymode.
CYS: PAL / SECAM / NTSC
SYS: BG/DK / I / M
HDMI Input (support up to 1080P)
PC Input (support up to 1080i)
NICAM Stereo / AV Stereo
Program organiser
4:3 format , 16:9 format ,14:9 zoom ,
16:9 ZOOM1,16:9 ZOOM2
Panel Features
High resolution (1366x768), 26" TFT LCD
display.
2
Brightness: 400cd/m
High-speed response time <8msec.
8-bit color depth, display 16.2M colors.
High contrast ratio (800:1 Typital)
00
Viewing angle:160 (H)/150 (V)(CR>10).
In The Box
Television
User Guide
You should have:
Remote control
Warranty Card
2 x AAA battery
Stand
Wall mount
SETUPSETUP
-2-

FUNCTIONAL PARTS
3
10 12
5
6
7
8
9
TV/AV
MENU
VOL.-
VOL.+
PROG.-
PROG.+
4
1818 1111
1313 1212
14141717 1616 1515
-3-
1. ON/OFF Switch
2. Power Indicator
3. Remote Sensor
4. TV / AV
5. MENU
6. VOL.- Button
7. V0L. + Button
8. PROG.- Button
9. PROG.+ Button
10. Speakers
11. Aerial input socket
12. AV Input
13. AV Output
14. YPbPr Input
15. VGA Audio Input
16. VGA Input
17. HDMI1 Input
18. HDMI2 Input
10
75 ANT
Pb PrY
VIDEO
VGA
HDMI1HDMI2 RIGHT -AUDIO- LEFT
VIDEORIGHT -AUDIO- LEFT
LEFT -AUDIO- RIGHT
VGA AUDIO I N
AV IN
AV OUT

HDMI CABLE CONNECTIONS
Important information s both HD playerand display beforemaking any
connections. Connect theHDMI cable tothe HDMI socketof the TV, connect theother
end to theHDMI output socketof the HDplayer source.
witch off
Device HDMI
HDMI
HDMI
HDMI CABLE NOT SUPPLIED.
Connect the HDMI cableto the
HDMI input on theTV.
Connect the other endof this
cable to your HDdevice.
-4-
FUNCTIONAL PARTS
75 ANT
Pb PrY
VIDEO
VGA
HDMI1HDMI2 RIGHT -AUDIO- LEFT
VIDEORIGHT -AUDIO- LEFT
LEFT -AUDIO- RIGHT
VGA AUDIO I N
AV IN
AV OUT

PROGRAM SELECTION BUTTONS (0-9)
You could select program you want with 0-9
button. For program up to 100-199, you need
press three digit number quickly, then TV will go
to the program directly. For program between
10-99, you need press two digit number
according program quickly and wait, then TV
will go tothe program. For program between0-9 ,
just press onedigit and wait.
Remote Control Unit
4
6
8
SLEEP
CANCEL
REVEAL
Sub-page
INDEX
SIZEHOLD
MIXTEXT
PIP ON/OFF PIP SOURCE PIP SOUND PIP SIZE
PICTURE SOUND FAV. NICAM
EXIT
MENU
VOL INFO PROG
RECALL
AV/TV
MUTE
POWER
7
5
MUTE BUTTON ( )
Press once to mute the sound, press again to
return to presetsound level.
POWER (STAND BY) BUTTON (
)
Press this buttonto turn theTV on/off.
1
2
3
-5-
OPERATION INSTRUCTIONS
AV/TV BUTTON
Press this buttonto display externalvideo signal
Such as TV/AV IN/HDTV/ VGA/HDMI1/HDMI2.
Press up/down arrowkey to selectitem and
press left/right arrowkey to enterselected item.
SLEEP BUTTON(SLEEP)
Press this buttonto set the sleep timer. When
the preset length of time has passed, the TV
set Enters standby mode. The time
change(minutes):10,20,30,40,50,60,90,120, off
---.
INFO BUTTON
Press this buttonto display thesettings on the
screen.(e.g. Channel numberfor TV input,
channel name, coloursystem).
PROGRAM UP/DOWN BUTTONS (PROG.+/-)
Press the PROG.+button to selectthe program
Forwards. Press the PROG.- button to select the
program backwards.
VOLUME UP/DOWN BUTTONS (VOL.+/-)
Press VOL+/- buttonsto adjust soundlevel. Or
adjust the volumeof each itemin the menu
status.
QUICK VIEW BUTTON (RECALL)
Press this button to return to the previously
viewed program.
9

MENU BUTTON (MENU)
Press this button to enter the menu screens for
various Optional adjustablesettings.
SOUND MODE BUTTON(NICAM)
Press this button, you can select different sound
mode when the source is different.
TV SOURCE
The NICAM
selection is commonfor all TVchannels .
1. MONO: MONO
2. STEREO: MONO, STEREO
3. DUAL : MONO,DUAL1, DUAL2
11
12
13
14
OPERATION INSTRUCTIONS
Remote Control Unit
-6-
SLEEP
CANCEL
REVEAL
Sub-page
INDEX
SIZEHOLD
MIXTEXT
PIP ON/OFF PIP SOURCE PIP SOUND PIP SIZE
PICTURE SOUND FAV. NICAM
EXIT
MENU
VOL INFO PROG
RECALL
AV/TV
MUTE
POWER
CURSOR button( / )
Left/Right/Up/Down direction keys for selecting
menu itemsor signalsources.
EXIT BUTTON
Press to exit MENU directly.
OK BUTTON (OK)
Press to enterselected item.
Left Right arrow/Zoom-/+ (Z- / Z+)
Press to change the screen format: 4:3 format, 16:9
format, 14:9 ZOOM, 16:9 ZOOM1, 16:9 ZOOM2.
PICTURE Button
Press to change the picture setting :Normal , soft ,
personal, bright .
Fav. BUTTON
Press Fav. button to switch favourite channel which
you had set in Favourite channel MENU. If there is
no channel in Favourite channel list, there is no
response for this Fav. Button.
SOUND Button
Press to change the sound setting :standard, Music,
Film, Voice, Personal .
10
15
16
17
18
PIP ON/OFF
Press this buttonto switch onor off PIPfunction .
PIP function isavailable in HDTV, VGA, HDMI
mode only.
PIP SOURCE
Press this buttonto select PIPsource from TV,
AV when PIP is active.
19
20

-7-
SLEEP
CANCEL
REVEAL
Sub-page
INDEX
SIZEHOLD
MIXTEXT
PIP ON/OFF PIP SOURCE PIP SOUND PIP SIZE
PICTURE SOUND FAV. NICAM
EXIT
MENU
VOL INFO PROG
RECALL
AV/TV
MUTE
POWER
OPERATION INSTRUCTIONS
21
CANCEL BUTTON (OPTION)
Press this buttonto appear theTV signal onthe
background.
REVEAL BUTTON (OPTION)
Press this button to reveal the hidden
information for some Teletext pages press again
to hide theinformation.
INDEX BUTTON (OPTION)
Press this button to enter the Teletext's index
MENU.
SUB.PAGE BUTTON(OPTION)
Subcode mode, gives, the possibility to select
certain subcode pagesof a teletextpage.
SIZE BUTTON
Press this button you can select different image
sizes: Normal, double high top, double high
bottom.
MIX BUTTON(OPTION)
the button is used as closing /opening the
teletext Background.
HOLD BUTTON
Press this buttonto hold theTeletextpage
without update to prevent the page from
changing. Press again torelease the hold state.
TEXT BUTTON
This button is usedfor entering the teletextMENU.
F1-F4 (OPTION)
These four colorkey are forrelative fast teletext
function in thebottom of teletextpage and
organizer function relativeoperation.
22
23
24
25
26
27
PIP SOUND
Press this buttonto select currentsound output
from main orPIP source whenPIP is active.
PIP SIZE
Press this buttonto change PIPpicture size ,
Normal or Zoomwhen PIP isactive .
28
29
30
31

INDEX
MIX
MIX
MIX
SIZE
-8-
SIZE
SIZE
REVEAL
REVEAL
SUB.PAGE
SUB.PAGE
1000
Text
Up arrow key
Down arrow key
You could
stop it bypress "HOLD" button.
So TV willdisplay text pageyou required
quickly .

To Cancel TEXT
Press "CANCEL" button to clear the TEXT.
But the page number is still displayed on
the left top of the screen.
NOTICE: However, Teletextis playing all the
same on the background at the time.
Press " CANCEL" button again to resume
the TEXT.
Press "HOLD" button to hold a Text
Page. This means the page will not change
and refresh.
Press the button again to release the hold
state.
To Freeze TEXT
To exit Teletext
Press the " TEXT " or " EXIT" button. The
screen will switch to TV mode.
-9-
Up arrow key
Down arrow key
Note : If there is no teletext signal in
your region ,when you press"TEXT"
button , youcould entry teletextmode
also , butTV will showtop and bottom
line only asgraphics below ,all teletext
function is notavailable .
100
P - 110 200 P +

MENU BUTTON
1.Press menu buttonto display menu, and press left/right arrow key to select sub menu.
2.After entering anitem, you canselect the desiredadjusting item bythe up/down
arrow key and adjust It by the left/rightarrow key buttons.
1. Plug inthe power cord and switch on power switch . The power indicator will light up.
If TV isin stand bymode. Then Press"¡¡" Key. The picturewill display in few minutes.
ANALOG MENU SCREENS
Enter picture menu, you can selectPicture
Preset, Contrast, Brightness, Colour, Sharpness,
and Noise Reduction.items by pressing
up/down arrow key.
Picture Preset
Press the left/rightarrow key tochange the
Picture Preset. Suchas SOFT, NORMAL, BRIGHT,
Or Personal.Choose the settingthat is bestfor
your viewing environment.
Contrast
Press the left/rightarrow key toincrease
/Decrease the contrastof the picture.
Brightness
Press the left/rightarrow key tolighten/darken
the picture.
Colour (not availableon PC)
Press the left/rightarrow key Adjusts the
richness of thecolor.
Sharpness
Press the buttonto sharpen orsoften the picture.
(Not available onPC and HDMIinput .)
Tint
Press the left/rightarrow key toadjust tint.
(Available for NTSC.)
Noise reduction
Press the buttonto select off, low,mid, high to
adjusts the dynamicnoise reduction levelof
image.(Not available onPC and HDMIinput .)
Color Temp
Press left/right arrowkey to changepicture color
temperature such asneutral, warm andcool .
Picture menu
-10-
PICTURE SOUND
TIMER
PREFERENCE PARENTAL CONTROL
INSTALLATION

Sound menu Enter Sound menu,you can selectSound Mode,
Balance, Treble, Bass, AutoVolume Level. Items
by pressing up/downarrow key.
Sound Mode
Press the left/rightarrow key toselect the audio
mode. The audiomode are Standard,Music,
Film, Voice, Personal.
Balance
Press the left/rightarrow key toadjust to the
left to rightsound channel volume.
left/right arrow key
left/right arrow key
Auto Volume Level
Press left/right arrowkey to switchAVL function
on/off. AVL function is not available except TV
mode.
TV Speaker
Press left/right arrowkey to selectspeaker of
sound output .When select Internal, sound is
output from TVspeaker , S/PDIFis mute :when
select External ,TV speaker ismute, S/PDIF is
active as outputfor external speaker.
Treble
Press the to adjust thehigh
frequency signal value.
Bass
Press the to adjust thebass
boost value.
-11-
Enter Installation menu,you can search,
and edit channelor favorite programby pressing
up/down arrow key.
Language
Press the left/rightarrow key andMENU buttons
to select theosd Language.
Channel Number
You could change and display channel number
you want.
CHANNEL NAME
Display channel name,you could editit if press
"OK" to enteredit sub menu.use up/down arrow
key to changename of programin the editsub
menu.
Installation menu
ANALOG MENU SCREENS

-12-
Colour Sys
Press the buttonto select anew colour standard
value in TV. The choicesare AUTO, PAL,NTSC
and SECAM.
Sound Sys
Press the buttonto select anew sound standard
value in TV. The choicesare B/G, D/K, I, M. It's
better to selectit before autoinstallation.
Country
Select country asyour location, TVwill make
auto-sorting after autoinstallation, it's betterto
select it beforeauto installation.
Auto Installation
Press right arrowkey to startauto program
search. TV willsearch all bandfor program.
Manual Installation
Press right arrowkey to startManual program
search . TVwill search upwarduntil one
program found. You could inputthe program
frequency directly tofind program alsoif you
know it.
Fine Tuning
Press left/Right arrowkey to decrease/increase
current frequency stepby step.
Organiser
Press left arrowor OK keyto enter submenu,
then you coulduse four colorkey to Delete,
Copy, Move, Skip program in the list.
Favourite Channel
Press left arrowor OK keyto enter submenu.
There is 8Favourite program which could beset .
you could useleft/right arrow keyor digit
number key toselect favourite program.
ANALOG MENU SCREENS
Installation menu

Preferences menu
-13-
Enter Timer menu,you could set time and turn
on/off timer. With Timereference, you could set
channel from whichTV get teletext time. Current
Time show thetime of your TV remember, you
could set thistime manualy ifyou want.
Otherwise, TV getit from channelfor time
reference .
Turn off/Wake up time used forsetting of TV turn
off and/or wakeup time accordingcurrent time.
you could selectwhich channel youwant when
the TV wakeup according wakeup time.
Time menu
Enter preferences menuyou can setupthe
Zoom, Film mode,OSD Transparent, Teletext
char. Set.
Select preferences menuby press the
up/down arrow keyand enter thecaption
function by pressingleft/right arrow key, you can
adjust the Stylefunction items bypressing
left/right arrow keybuttons.
Zoom
The picture displaywill change as4:3 format ,
16:9 format ,14:9 zoom, 16:9ZOOM1,16:9
ZOOM2 when youchange Zoom setting.
Film Mode
This option setsthe file modeon or off.
OSD Transparent
you could selectdifferent OSD background
transparent by it. Setting itfrom 0 to7.
Teletext char. Set
you could selectteletext character setby press
left/right arrow key. it couldbe selected from1
to 5 forcharacter set West Eu. , East Eu. , Cyrillic ,
Turkey , Arabic.
ANALOG MENU SCREENS

Parental Control menu Enter Parental Control menu you can set control
of it .Pressleft/right arrow keyto select Parental
Control item, thenpress up/down arrowkey to
entry menu.
Input correct passwordto entry submenu when
PIN item ishigh light .The initial passwordis
"0000".
Lock Installation
Press left/right arrowkey to lockinstallation
menu or unlockit. This itemis only available in
TV mode .
Channel Number
Press left/right arrowkey to selectchannel
which you wantlock. This itemis only available
in TV mode.
Lock Channel
Press left/right arrowkey to activechannel lock
function on oroff. This item is onlyavailable in
TV mode.
Lock Front panel
Press left/right arrowkey to lockfront key board
or not.
New PIN code/RepeatPIN code
Input and doubleconfirm new PINcode if you
want have onenew password.
-14-
ANALOG MENU SCREENS

15 Pin MiniD-Sub Connector
PICTURE
PC MODE
MENU in PC Mode
-15-
and LCD TV.
PC Input typicaldisplay modes. Thefollowing
table is an illustration of some of the typical
video display modes.
1 640X480(recommend 60Hz)
2 800X600(recommend 60Hz)
3 1024X768(recommend 60Hz)
4 480p
5 576p
6 720p(50/60Hz)
7 1080i(50/60Hz)
In PC modestate,
there are 4
supported all functionsare the
same as inTV mode.
Enter menu bypressing the "MENU"
button on theremote control.
geneal menus (Picture,Sound, Time
,parental control)
ANALOG MENU SCREENS
Geometry menu
when you connectVGA cable to the jacks of PC or
connect HD cableto device suchas DVD, and select
the signal sourceas "VGA" or"YPBPR" the screen
menu will active.
You can use the function to adjust the display setting
automatically or manual.
H-Position
Press left/right arrowkey to adjust the H-Position of television thescreen appear as.
V-Position
Press left/right arrowkey to adjust the V-Position of television the screen appear as.
Phase
Press left/right arrowkey to adjust the phase of the picture. This item is only available
in VGA mode.
Colck
Press left/right arrowkey to adjustthe updating frequencyof the picture. This item is
only available inVGA mode .
Auto Adjust
Press left/right arrowkey to auto adjust PC size and position. This item is only available
in VGA mode.

Enter preferences menuyou can setupthe
Language, Zoom, OSDTransparent.
Select preferences menuby press the
up/down arrow keyand enter thecaption
function by pressingleft/right arrow key, you
can adjust theStyle function itemsby pressing
left/right arrow keybuttons.
Language
Press the left/rightarrow key andMENU buttons
to select theosd Language.
Zoom
The picture displaywill change as4:3 format ,
16:9 format ,when you changeZoom setting.
OSD Transparent
you could selectdifferent OSD background
transparent by it. Setting it from0 to 7.
Press up/down arrowkey to selectPIP item and
press left arrowkey to entrysub menu .PIP
function is onlyavaiable in PC,HDTV, HDMI
mode.
PIP
Press left/right arrowkey to switchon or offPIP
function .
PIP Source
Press left/right arrowkey to selectPIP source
such as TV, AV.
Sound
Press left/right arrowkey to selectTV sound
from main orPIP channel.
PIP Size
Press left/right arrowkey to selectPIP size such
as 1 or2 . 1for small PIPpicture, 2 forbig PIP
-16-
ANALOG MENU SCREENS
Pip menu
Preferences menu

The menu ofY Pb Prmode is exactlysame as themenu of HDMImode.
YPbPr Input typicaldisplay modes.
The following tableis an illustrationof some ofthe typical videodisplay Modes.
HDMI Input typicaldisplay Modes.
The following tableis an illustrationof some of typical Video
display modes.
HDMI Input Resolutions
-17 -
Y Pb Pr Mode(Component input)
1 480i
2 480p
3 576i
4 576p
5 720p(50/60Hz)
6 1080i(50/60Hz)
1 640X480(recommend 60Hz)
2 800X600(recommend 60Hz)
3 1024X768(recommend 60Hz)
4 480p
5 576p
6 720p(50/60Hz)
7 1080i(50/60Hz)
8 1080p(50/60Hz)
7 1080p(50/60Hz)
ANALOG MENU SCREENS