Sleepmasters LUCETTA BEDSTEAD User manual

LUCETTA BEDSTEAD BED 90 CM
Assembly instructions
please keep these instructions for future reference.
Regrettably self-assembly items cannot be returned once assembly is part or fully completed
unless the items are found to be faulty. Should you need to return the unassembled product,
please repack in its original packaging.
lmportant information
We suggest you spend a short time reading through this leaflet and then follow the simple
step-by-step instructions.
Carefully check that you have all the parts before beginning assembly.
Keep fittings out of children's reach and keep children well away from construction area.
We suggest you retain these instructions for future reference.
Product information
Product powder coating in graphite or pearl white finish.
Posture slats .
Care instructions
Avoid exposing the furniture to excessive heat or direct sunlight as this can cause cracking and
deterioration of the color.
Periodically check & re-tighten any fastener .
Periodically dust lightly with a clean soft cloth.
Do not use silicone based furniture polish.
Any spills should be removed immediately with a damp cloth.
TAKE CARE WHEN MOVING THE FURNITURE AND NEVER DRAG THE PIECES ACROSS
THE FLOOR, AS THIS WILL CAUSE DAMAGE TO THE JOINTS
P.O Number :
Please Keep This Number For
Future Reference
THIS FORMS PARTS OF
YOUR GUARANTEE !!!
Page 1 of 3
Two Person Assembly
Required
The beds conform to BS EN 1725:1998 .

(4) Plastic End Cap x 32
(A) Bolt 1/4'' x 22 mm
x8
(C) Plastic Washer
x 8
(D) Metal Washer
x 8
(E) Allen key
x 1
(1) Head Board x1
(2) Foot Board x1
Component of Carton A Component of Carton B
Single size (90cm x 190cm)
Hardware of Carton A
(5) Side rail x 2
Page 2 of 3
Step 1
Attach side rails to headboard
& footboard.
1
6
6
(B) Finial x 4
(B) Bolt 1/4'' x 4
B
ADC
E
(3) Posture slat x 16
5
5
1
2

Page 3 of 3
Step 2
lnsert slats into rails.
Step 3
3
4
4