Brunner cellular User manual

cellular
Assembly instructions
Design: Archirivolto

Thank you for buying a quality Brunner product from the
cellular series. The versatile lounge furniture in our cellular
range is perfect if you are looking to furnish small quiet areas
and workspaces in large halls and waiting areas. Available with
or without panel, these versatile chairs and benches can be used
in a myriad of ways.
Thanks to the 60° angled construction of the work and lounging
units, they can be set out in groups, lines or circles, making best
use of available space. Side tables that can be flexibly positioned
make for the ideal addition to the range.
If upholstered easy chairs, work tables or standing tables are
ordered with panel, the panel have to be mounted on site. These
assembly instructions provide an explanation of all of the key
components and will help you to assemble your cellular lounge
furniture with ease.

CELLULAR ASSEMBLY INSTRUCTIONS
Contents
4
5
7
10
11
14
14
14
14
15
15
Lounge elements with panel
Scope of delivery of upholstered furniture with panel
Assembly instructions for upholstered easy chair and panel
Scope of delivery of work table/standing table with panel
Assembly instructions for work table/standing table with panel
Further information
General information about assembly
Recommended assembly tool
Care instructions
Note
Imprint

LOUNGE ELEMENTS
WITH PANEL

Lounge elements with panel | Scope of delivery of upholstered easy chair with panel 4 . 5
SCOPE OF DELIVERY OF UPHOLSTERED EASY CHAIR
WITH PANEL
Included in scope of delivery:
12X 5X30 Spax screws 4X brackets
1X M5x35 screw 4X M5x16 screws
1X left-hand 1X right-hand
panel panel
1X chair

ASSEMBLY INSTRUCTIONS FOR UPHOLSTERED
EASY CHAIR WITH PANEL
ASSEMBLY STEP 1
Hook the right-hand panel into the pre-assembled fixture on the right-hand side on the back of the upholstered easy chair,
taking care not to press down.
ASSEMBLY STEP 2
Then, hook the left-hand panel into the corresponding fixture on the left-hand side on the back of the upholstered easy
chair, again taking care not to press down.

ASSEMBLY INSTRUCTIONS FOR UPHOLSTERED
EASY CHAIR WITH PANEL
Assembly instructions for upholstered easy chair with panel 6. 7
ASSEMBLY STEP 3
Gently push the top edges of the two panel apart and position the M5x35 screw in the corresponding thread in the
left-hand panel. Tighten the screw accordingly.
ASSEMBLY STEP 4
Lift the right-hand panel up slightly and hook the screw from the left-hand panel into the recess in the right-hand panel to
attach them to one another.

ASSEMBLY INSTRUCTIONS FOR UPHOLSTERED
EASY CHAIR WITH PANEL
ASSEMBLY STEP 5
Now push the two panel down so they are locked into position in the fixtures on the upholstered easy chair.
ASSEMBLY STEP 6
Carefully tip the upholstered easy chair back together with the panel and place the furniture on a soft and clean surface,
such as a blanket. Position the four brackets at the recommended points between the lower edge of the upholstery and the
panel. Fix in position on the panel using an M5x16 screw.

Assembly instructions for upholstered easy chair with panel 8. 9
ASSEMBLY STEP 7
Push the panel to the side of the upholstered easy chair and align the bracket with the chair. Fasten the four brackets to the
base of the upholstered easy chair using three 5x30 Spax screws for each. Make sure the first panel is fastened before
moving on to the second panel.
ASSEMBLY INSTRUCTIONS FOR UPHOLSTERED
EASY CHAIR WITH PANEL

SCOPE OF DELIVERY OF WORK TABLE AND
STANDING TABLE WITH PANEL
Included in scope of delivery:
4x m5x40 screw 6x m5x20 screws
1x m5x35 screw 2x cable channels
for electrification
1x left-hand 1x right-hand
panel panel
1x standing or 1x table
table

Assembly instructions for work table and standing table with panel 10. 11
ASSEMBLY STEP 1
Place the right-hand panel on a soft and clean surface, such as a blanket, and position the work table or standing table on
top on its side. Align the frame with the top two screw-on points on the panel and fix in position on the panel using two
M5x40 screws.
ASSEMBLY STEP 2
Fasten the three fixing lugs on the two table legs to the panel using M5x20 screws.
ASSEMBLY INSTRUCTIONS FOR WORK TABLE AND
STANDING TABLE WITH PANEL

ASSEMBLY STEP 3
Position the M5x35 screw in the corresponding thread in the left-hand panel and tighten the screw accordingly.
Now follow assembly steps 1 and 2 again to assemble the left-hand panel.
With cable channel
ASSEMBLY INSTRUCTIONS FOR WORK TABLE AND
STANDING TABLE WITH PANEL
Without cable channel
ASSEMBLY STEP 4
Turn the table over carefully and place it on its legs. If you have ordered a cable channel, follow the instructions provided in
assembly step 5.

Assembly instructions for work table and standing table with panel 12. 13
ASSEMBLY STEP 5
To fasten the optional cable channel, simply hang the two strips along the rear table leg at the back on the right and left.
ASSEMBLY INSTRUCTIONS FOR WORK TABLE AND
STANDING TABLE WITH PANEL

FURTHER INFORMATION
GENERAL INFORMATION ABOUT ASSEMBLY
The assembly instructions provide general guidelines for assembling your cellular furniture
· The steps described are to be followed for all cellular chairs and tables
· The assembly tools suggested are simply recommendations from Brunner GmbH
· Only the materials supplied may be used for assembly
· Brunner GmbH accepts no liability for damage caused during assembly
ASSEMBLY TOOL FOR CELLULAR FURNITURE
Cordless screwdriver with hexagon and cross insert
CARE INSTRUCTIONS –POWDER-COATED BASES
For normal use, it is sufficient to wipe the powder-coated surfaces with a clean, soft, slightly damp cloth. Any particularly
dirty areas can be cleaned with a standard, grease-dissolving all-purpose cleaner. However, abrasive cleaning agents and
toilet or sanitary cleaners must not be used because they may damage the powder-coated surface. Acid or alkaline cleaning
agents and organic solvents must also not be used. Please only use soft cotton cloths for cleaning purposes and never use
plastic sponges, wire wool or steam jet devices, which could permanently damage the surface. The gliders' surfaces should
be regularly cleaned to remove coarse pieces of dirt or deposits.
CARE INSTRUCTIONS –COVER FABRICS AND LEATHER
Cover fabrics should be regularly vacuumed with a soft attachment. We recommend following the cleaning and care
instructions of the material manufacturer to remove stains and dirt deposits. During normal use, it is sufficient to wipe the
leather covers with a dry or slightly damp cloth. If dirt has dried on, the best way to clean the area is with a weak neutral
soap solution and a soft cloth. Then remove the soap suds with a damp cloth. The leather cover must never be treated with
standard cleaning agents (washing-up liquid, all-purpose cleaner etc.) because they will irreversibly damage the leather sur-
face (impregnation/glaze). Solvents, cleaning petrol, stain removers, spirit, shoe cream etc. must also not be used. We offer
an appropriate care kit for cleaning your leather covers.

Notes
For details, prices, terms and conditions, refer to the current
price list. We reserve the right to technical changes, errors
and colour deviations. Some models are displayed as special
versions that are subject to additional costs.
Imprint
Product design:
Archirivolto
Illustrations:
Andreas Stapel . Brunner GmbH
Text:
Kerstin Lamprecht . Hanne Haaf . Brunner GmbH
Design:
Kerstin Lamprecht . Brunner GmbH

05 | 2017
www.brunner-group.com
© Brunner GmbH 2017 . Im Salmenkopf 10 . 77866 Rheinau, Germany
T. [phone] . F. [phone] . [email protected]