SLG S-7000P User manual

Made in Korea

2
If you read and fully understand this user manual, you can use the product safely and efficiently.
5. How to change a filter ..... 13
7.
Solutions against problems
15
9. Please check before asking
after-sales service............ 16
10. Product specification .... 18
Quality and warranty certificate ...
19
8. How to use alkaline water
.. 16
6. How to measure pH ......... 15
5-1. When to replace the filter ..........13
5-2. How to replace the filter ............14
5-3. When to replace the filter ..........14
5-4. Filter components .......................14
7-1. Flux control ..................................15
7-2. Overload control of the electrolytic
cell ................................................15
1. Cautions for use ................ 3
3. Installation of the product.. 7
4. How to use the product ..... 9
2. Part names and functions... 5
1-1. Cautions for drinking .................... 3
1-2. Cautions for installation ................ 3
1-3. Cautions for use ...........................4
1-4. Storage after use .......................... 4
1-5. Cautions for electric power ......... 4
1-6. Cautions for electric power ......... 4
3-1. Checking the components .......... 7
3-2. Checking any problems of the
product .......................................... 7
3-3.
Understanding before installation
. . 7
3-4. City water pipe connection ......... 8
3-5. Installation depending on the
service place ................................8
4-1. Preparation before use ................9
4-2.
Power switch On and operation
...9
4-3. Use of alkaline water ..................10
4-4. Use of purified water ..................11
4-5. Use of acidic water ....................12
4-6. How to stop the operation .........12
4-7. How to control water quality .....13
4-8.
How to use a volume controller
. 13
2-1. Names and functions on the
appearance ................................. 5
2-2. Names and functions on the
control panel ................................. 6
This user manual describes the operation and usage of the product for accurate handling.
All users should read this user manual carefully before using this device.
The product should be used within the range recommended in this user manual.
Something that tells someone about
possible death or serious injury, if violated
Something that tells possible injury or
property damage, if violated
WARNING CAUTION
List of contents

3
1. Cautions for use
1-2. Cautions for installation
(1) Do not use hot water or other water improper for a drink.
(2) Avoid a place directly contacted with fire.
(3) Avoid direct sunlight for installation.
(4) Do not install at a place susceptible to water freezing.
(5) Do not install at a place where a heavy object is lifted or at an unstable place.
(6) Do not modify the product arbitrarily.
1-1. Cautions for drinking
(1) When drinking water generated by electrolysis, you should pay attention to
the following matters.
① Please do not drink medicine together with alkaline water.
② When drinking at first, consult a doctor and start to take a small amount of water within
the range close to neutral pH.
③ If you feel discomfort after drinking or do not feel better in abdominal discomfort even after
continuous drinking, stop use and consult a doctor.
④ A person who gets medical treatment from doctor, especially has kidney disturbance or
any physical problem, should consult a doctor before drinking.
⑤ A renal disease patient with kidney failure or potassium excretion insufficiency should not
drink.
⑥ Before drinking alkaline water, use an electrode-type pH meter to check pH values, in
the beginning of first drinking and later more than one time every month, if they are within
the drinking range
⑦ Throw away initially inflowing alkaline water one time, and immediately drink the following
water generated.
⑧ For an optimum amount of drinking, it is recommended to take 500~1,000㎖ a day.
⑨ Please observe the following matters with respect to the storage of generated water.
- How to store alkaline water: Alkaline water should be contained in the closed container
and kept in the refrigerator (0~5℃).
- Alkaline water container: polyethylene container, porcelain container, glass container
- Storage period (hours): 3 days (72 hours)
⑩ Never use hot water.
⑪ Check if the following contents are included in the filter, before use,
▷ Filter type (material):
No. 1 Free block carbon filter - PP non-woven fabric, Calcium sulfite, Block carbon
No. 2 Complex block carbon filter - PP non-woven fabric, Zeolite, Tourmaline, Block
carbon
▷ Country of Origin: Republic of Korea
▷ Manufacturer: SLG Co., Ltd. (Tel. [phone])
▷ Replacement time: Free Block Carbon Filter - about 6 months
Complex Block Carbon Filter No. 2 - about 12 months
▷ Manufacturing date: printed at the time of manufacture
▷ Effective water purification quantity: Free Block Carbon Filter - 2,800ℓ,
Complex Block Carbon Filter - 5,600ℓ
⑫ Do not drink acidic water.
⑬ Keep in mind the shelf life (5 years) of an electrolytic cell for use.
(2) For service environment and conditions, please pay attention to the following
matters.
① Do not use source water not complying with city water laws.
② Do not use at high temperatures like in the bathroom.
③ Do not use at high humidity or temperatures.
④ Do not use at a place affected by atmosphere, wind, sunlight, salt and air.
⑤ Do not use at a chemical storage warehouse or gas emission site.
⑥ Use at a stable place with no slope.
⑦ Do not use at an area with low water pressure (lower than 1 kgf/㎠) and source water
flux (lower than 0.6 ℓ/min)
WARNING
WARNING

4
1-3. Cautions for use
(1) If any problem occurs during use, please refer to checking points before asking
after-sales service.
(2) If any problem occurs, do not dissemble or modify arbitrarily. Otherwise, it may
cause product failure or electric shock.
(3) Do not use hot water. It may cause damage on the electrolytic cell.
(4) Do not put a dangerous or heavy object on the product during use.
(5) Ambient environment should be well ventilated.
(6) In case of no use for a long time, turn off the water tap.
1-4. Storage after use
(1) While moving, be sure to turn off the power.
(2) Do not let water flow into the main body while cleaning.
(3) Do not clog the drain, or bend/twist/press the hose.
(4) In case of no use for a long time, pull out the electric code from the socket.
(5) Wipe the surface of main body with a soft cloth coated with soap water.
1-5. Cautions for electric power
● If the main body is fallen into water, immediately pull out the plug from the socket
and take it out of water.
▷ It may cause electric shock.
● Do not use the power exceeding the rated one for the socket or wiring
apparatus, nor use other than AC 220V.
▷ If octopus-like wiring exceeds the rated power, it may cause fire due to
heating.
● Do not insert or pull out the plug with a wet hand.
▷ It may cause electric shock.
● Push the electric plug to the end of the socket.
▷ If plugging into the socket is unstable, it may cause electric shock or fire due
to heating.
▷ Do not use a failed plug or loose socket.
● When taking out the electric plug, do not pull or force the code line but hold the
electric plug to take out.
1. Cautions for use
WARNING
WARNING
CAUTION
1-6. Cautions for electric power
● Never place the measuring indicator near fire
※ As indicator is inflammable, it may cause fire.
● Do not use an aluminum container (metal container) weak to alkali or copper
container weak to acid to store alkaline water.
▷Metal container is susceptible to corrosion or easy to lose activation.
● Do not drink ion water or purified water generated long ago (recommended to
drink within one day after generation)
● Never drink a measuring agent nor let it touch on eyes or skin.
▷ If drunk mistakenly, vomit and consult a doctor.
▷ If in eyes, wash thoroughly with water and consult a doctor quickly
▷ If on skin, wash with water
▷ After closing the cap, store at a cool place out of reach of children.
● In case of a failure, do not dissemble/assemble arbitrarily. Write down the failure
symptom and contact our customer center.
● Never modify the device. (After-sales service may be restricted)
● If you want to re-use the device not having used for a long time, be sure
to check if the device works normally and contact our customer center for
inspection and re-use.
CAUTION

5
2. Part names and functions
Part No. Name Function
Fron
1 Display Display window of the selected function
2 Filter 1,2 icon Notification of filter replacement
3 Setting icon Indication of water quality, voice, and filter setting
4 Alkaline water button Alkaline select button
5 Water purification button Water purification select button
6 Acidic water button Acidic water select button
7 Setting button Water quality, voice, and filter setting
8 Start/Stop button Start/Stop button of each function
9 Water nozzle Water nozzle for alkaline water, purified water, and
acidic water
Side 10 Power switch Power On/Off switch
Rear
11 Wall hanging hole A hole to install on the wall
12 Radiation grill Heat release hole generating from the product
13 Product sticker Indication of Product specification
Underside
14 Water inlet hose connection
(source water) A holder for water inlet connection
15 Power line A holder to fix the power line
16 Speaker hole Voice information speaker hole
17 Drain hose connection
(acidic water) A holder for drain hose connection
번 호 명 칭 기 능
 디스플레이 선택된 기능별 표시창
 필터 1, 2 아이콘 필터 교체시기 알림
 설정 아이콘 수질, 음성, 필터 설정 표시
 알칼리수 버튼 알칼리수 선택버튼
 정수 버튼 정수 선택버튼
 산성수 버튼 산성수 선택버튼
 설정 버튼 수질, 음성, 필터 설정
 운전/정지 버튼 각 기능 운전/정지 버튼
 출수노즐 알칼리수, 정수, 산성수 출수구
 전원스위치 전원 On/Off를 하는 스위치
 벽걸이 홀 벽에 걸어 설치하기 위한 홀
 방열그릴 제품에서 발생하는 열 방출구
 제품스티커 제품의 사양 표시
 입수 호스 연결구(원수) 입수 호스를 연결하는 고정부
 전원선 전원선을 고정하는 홀더
 스피커 홀 안내음성 스피커 홀
 배수 호스 연결구(산성수) 배수 호스를 연결하는 고정부
■ 정면
■ 밑면
■ 측면 ■ 뒷면
2-1. 외관의 명칭과 기능
정 면
측 면
뒷 면
밑 면
부 위
2. 각 부분의 명칭과 기능







  












  












  












  





4 5
2-1. Names and functions on the appearance
■ Side ■ Front ■ Rear
■ Underside

6
2. Part names and functions
2-2. Names and functions on the control panel
No. Name Function
1Free Block
Carbon Filter
Complex filter comprising PP non-woven
fabric, Calcium sulfite, and Block carbon
2Complex Block
Carbon Filter
Complex filter comprising PP non-woven
fabric, Zeolite, Tourmaline, and Block carbon
■ Internal structure (front)
No. Name Function
1Acidic water indicator Indication when acidic water is selected
2Purified water
indicator Indication when purified water is selected
3Alkaline water
indicator Indication when alkaline water is indicated
4 Operation indicator After starting, it lightens sequentially and
indicates operation state.
5 Step indicator Step indication of alkaline and acidic water
6 Filter No.1 indicator Indication of effective purification quantity of
the filter
7 Filter No. 2 indicator Indication of effective purification quantity of
the filter
8
Water quality/
Flux/Voice setting
indicator
Indication of the set water quality/flux/voice of
the product
9Automatic cleaning
indicator Indication of automatic cleaning operation
10 Alkaline water button Alkaline water setting button
11 Purified water button Purified water setting button
12 Acidic water button Acidic water setting button
13 Setting button Used to set water quality/flux/voice of the
product
14 Start/Stop button Used to start/stop the product

7
3. Installation of the product
3-1. Checking the components
Remove the packing of the product and check if all components are included described in
the user manual. If all components are not included, please contact your distributor.
3-2. Checking any problems of the product
If you have removed the packing of the product and have checked the presence of
all components, the check if there are any problems of the product and components.
If any problems of the product are found, please contact your distributor.
3-3. Understanding before installation
The instructions described hereunder are to prevent unexpected danger or damage
in ad advance, which should be understood to install the product safely and
correctly.
(1) This product is for AC 220V.
(2) Be sure to turn off source water from the tap before installation.
(3) Check if it is cold or hot water, be sure to connect it to the value for cold water.
(4) Install on the flat floor.
(5) After installation. Release source water and check any leak.
(6) Avoid the vicinity of magnetic materials.
(7) Install in the well ventilated place.
(8) Install in the place convenient for source water supply and drainage.
(9)Dust filter should be installed between source water adaptor and product.
※ Pipe connection parts may differ from the above pictures.
Water nozzle
User manualMain body
Source water
adaptor
Wall hanging
nails
pH indicator
Source water
inlet hose t
Installation drawing
for wall hanging
Acidic water
drain hose
U S E R M A N U A L
CAUTION

8
3. Installation of the product
3-4. City water pipe connection
(1) Kind of service adaptor
The adaptor connected to the water tap or source water pipe differs as the kind of pipe.
Basic type included in the product when purchasing, may not fit to the city water pipe at the
installation place, but the consumer, if he want to install personally, he can replace it with the
proper adaptor from the distributor he have purchased the product.
1. As shown in the picture, lock the control adaptor with the rubber packing.
2. Separate the water tap and water pipe attached to the wall, and insert the control
adaptor between the separated water tap and water pipe. Then connect the height-
adjustable adaptor together to meet the balance of city water piping.
※ Use cold water only for source water.
(3) City water pipe connection for the sink
1. Pierce a hole (diameter: 8 mm) in the proper place on the upper side of the sink and
connect as shown in the picture.
2. Connect the control adaptor to the cold water pipe as shown in the box on the right side of
the picture.
3. Connect the connected pipe and the tube (1/4”) included in the product.
3-5. Installation depending on the service place
In case of using it on the sink or sink support
In case of using the product on the wall
1. Put the product on the suitable position.
2. Connect source water hose to water inlet and adaptor connection, and turn it firmly with a tool
not to fall out.
Insert a hose into the acidic water drain hose to drain water into the sink drainer.
If acidic water drain hose is too long to be immersed into the drainer, contaminated water may
inflow.
If acidic water hose is installed higher than the product or connected too long, automatic drain
function may not work while stopping the operation.
Install the product so that acidic water hose is not pressed by it.
1. Wet the installation drawing, and adhere it to the wall in parallel.
2. Hit the nail on the nail position. (Leave 1 cm of the nail head)
3. Install the product so that the wall hanging hole at the rear of the
product is hung on the nail.
(4) Things in common to be checked (compulsory reading)
1. After connecting all pipes, check for a leak.
2. Turn the source water adaptor valve by hand to control water release to the proper
amount (not to indicate flux control)
3. In case of no use for a long time, turn off the valve of source water adaptor.
(2) How to connect a wall mounting water tap - cold and hot water separation type

9
4. How to use the product
4-1. Preparation before use
① Read carefully the user manual.
② Connect the source adaptor to the cold water line.
③ Install the product at a stable place not to be fallen down.
④ Connect the water outlet of source water adaptor and the water inlet of the product to
the embedded water inlet hose.
⑤ After connecting the hose to the drain of the product, locate it to the drainer of the sink.
4-2. Power switch On and operation
⑥ Connect the water nozzle to the drain at the upper of the product.
⑦ Control the direction of the water nozzle to have the generated water released to
the desired position.
⑧ Check the voltage of the power and connect the power code to the socket.
⑨ If installation is completed, release source water and check for a leak.
⑩ After turning off the power switch as the side of the product, press the start/stop
button to operate the product and release water sufficiently for 2~3 minutes.
※ If the drain hose is at the bottom of drainer, as contaminated water may inflow, please use it as short as possible.
CAUTION
Automatic
cleaning for
10 seconds
How to use the product (common to alkaline water/purified water/acidic water)
① Turn on the power on/off switch of the product.
② LED display lights as a whole and becomes converted into standby state.
③ Press the Start/Stop button.
④ As voice message “Under automatic cleaning” and melody come out,
automatic cleaning indicator, acidic water indicator, step indicator (5 steps), and
operation indication light in sequence (cleaning time: 10 seconds).
⑤ If cleaning for 10 seconds is completed, voice message, “Alkaline ionized water
is coming out,” comes out, and alkaline water flows out from the water nozzle.
(Alkaline water indicator lights, and step indicator of step 1 lights)
⑥ When shipping out from the factory, alkaline water step 1 is selected as the basic
value. However, the product remembers the last production step during use and
that step in memory is set as the basic value in the next operation.
① Touch the beverage to
drink and select the next
step. (Whenever touching,
it changes from 1 to 2, 3,
4, and 5.)
② Press the
Start/Stop
button.
③ Voice message “Alkaline
(purified, acid) water is coming
out” comes out, and alkaline
(purified, acid) water flows out
from the water nozzle.
④ If you want to stop, press
the start/stop button to stop
alkaline water release.

10
4. How to use the product
4-3. Use of alkaline water
(1) How to use alkaline water in case of power on
(2) How to use alkaline water during standby
(3) How to use alkaline water in operation
① Connect the power code to the socket and turn on the power on/off switch.
② Press the start/stop button to let water into the product.
③ After automatic cleaning for about 10 seconds, alkaline water of step 1 flows out.
④ Press the alkaline water button to select the desired step.
⑤ If you want to stop, press the start/stop button to stop the release of alkaline water.
Automatic cleaning for 10 seconds
① Press the alkaline water button to select the desired step (ex. 4 steps)
② Press the start/stop button.
③ Voice message, “Alkaline ionized water is coming out”, comes out, and alkaline water flows out
from the water nozzle.
④ Drink the released alkaline water.
⑤ If you want to stop, press the start/stop button to stop the release of alkaline water.
① Press the alkaline water button to select the desired step (ex. 4 steps)
② Voice message, “Alkaline ionized water is coming out”, comes out, and alkaline water flows out
from the water nozzle.
③ If you want to stop, press the start/stop button.
Do not drink when taking medicine.
CAUTION
Automatic
cleaning for
10 seconds

11
4. How to use the product
(4) Steps of alkaline water Steps of alkaline water pH by step
Step 1 of Alkaline water Alkaline water pH 8.0±0.5
Step 2 of Alkaline water Alkaline water pH 8.5±0.5
Step 3 of Alkaline water Alkaline water pH 9.0±0.5
Step 4 of Alkaline water Alkaline water pH 9.5±0.5
Step 5 of Alkaline water Alkaline water pH 9.8±0.5
4-4. Use of purified water
(1) How to use purified water in case of switch on
① Connect the power code to the socket and turn on the power on/off switch.
② Press the start/stop button to let water into the product.
③ Automatic cleaning is in progress for about 10 seconds.
④ After completing automatic cleaning, press the start/stop button to select the purified water.
⑤ If you want to stop, press the start/stop button to stop the release of purified water.
Automatic cleaning for 10 seconds
(2) How to use purified water during standby
① Press the purified water button to indicate purified water on LED indicating window.
② Press the start/stop button.
③ Voice message, “Purified water is coming out”, comes out, and purified water flows out from the
water nozzle.
④ Drink the released purified water.
⑤ If you want to stop, press the start/stop button to stop the release of purified water.
(3) How to use purified water in operation
① Press the purified water button.
② Voice message, “Purified water is coming out”, comes out, and purified water flows out from the
water nozzle.
(However, if pressing the purified water button during the use of alkaline water, voice message,
“Wait for a moment,” comes out, and in 10 seconds, purified water flows out together with
voice message, “Purified water is coming out.”
③ If you want to stop, press the start/stop button.
※ The above values may
differ depending on water
quality and water pressure.
※ Drink when you take medicine.
Automatic
cleaning for
10 seconds

12
4-5 Use of acidic water
4-6 How to stop
(1) How to use acidic water in case of power on
① Connect the power code to the socket and turn on the power on/off switch.
② Press the start/stop button to start automatic cleaning.
③ After automatic cleaning for about 10 seconds, voice message, “Alkaline ionized water is
coming out,: comes out, and alkaline water flows out.
④ After completing automatic cleaning, press the acidic water button to select the desired step.
⑤ Press the start/stop button to stop the release of acidic water.
Automatic cleaning for 10 seconds
Never drink
WARNING
(2) How to use acidic water during standby
① Press the acidic water button to select the desired step.
② Press the start/stop button.
③ Voice message, “Acidic water is coming out”, comes out, and acidic water flows out from the
water nozzle.
④ If you want to stop, press the start/stop button to stop the release of acidic water.
(3) How to use acidic water in operation
① Press the acidic water button to select the desired step.
② Voice message, “Acidic water is coming out”, comes out, and acidic water flows out from the
water nozzle.
③ If you want to stop, press the start/stop button again.
① If you want to stop, press the start/stop button.
② In case of a long absence, please turn off the source water supply valve for safety.
Automatic
cleaning for
10 seconds
4. How to use the product

13
5. How to replace the filter
4-7 How to control water quality
5-1 Filter replacement time
① If pressing the setting valve for 5 seconds during standby, voice message, “Setting mode,” comes out
while filter indicator blinks. If pressing the setting button again, water quality indicator blinks.
② If pressing the alkaline water button, the step goes up. If pressing the acidic water button, the step goes
down (controllable to 1~30).
③ After setting water quality, if pressing the start/stop button, voice message, “Water quality
Setting completed,” comes out, and water quality setting is completed.
① Press the setting button for 5 seconds during standby.
② Filter indicator in the LED indicating window blinks.
(When replacing Filter No. 1, Filter 1 blinks. When replacing Filter No. 1 & 2, Filter 1 & 2 blink together)
- Setting mode rotation: Filter → Water quality → Volume → Filter (Automatic rotation according to
replacement time)
③ When replacing Filter No. 1, if pressing the purified button while Filter 1 blinks, reset is done.
When replacing Filter No. 1 & 2, if pressing the purified button while Filter 1 & 2 blink, reset is done.
If pressing the start/stop button, voice message, “Filter replacement completed,” comes out.
5. How to replace the filter
4-8 How to control the volume
① Press the setting button for 5 seconds during standby.
② Filter indicator in the LED indicating window blinks.
③ If pressing the setting button once again, water quality indicator blinks. If pressing one more again,
volume indicator blinks.
④ If pressing the alkaline water button, the step goes up. If pressing the acidic water button, the step goes
down (controllable to 00~05; 00: mute).
⑤ After setting the volume, if pressing the start/stop button, voice message, “Volume setting completed,”
and volume setting is completed.
RESET Completed
after voice
message

14
5-2. How to replace the filter
5-3 Filter replacement period
5-4 Components of the filter
① Turn off the valve of the source water adaptor.
② Pull the front cover to open.
③ Hold the upper side of the filter to be replaced, pull it forward, and turn it
counterclockwise to separate the filter from the filter adaptor.
④ Put the new filter into the filter adaptor, and turn clockwise to fix to the filter adaptor.
⑤ Reset the replaced filter to initialize. (Refer to 5.1 Filter replacement time)
⑥ Press the start/stop button to let water flow for about 2~3 minutes.
⑦ Check for a leak.
(1) Free Block Carbon Filter: about 6 months (2,800L)
(2) Complex Block Carbon Filter: about 12 months (5,600L)
This ion generator consists of two kinds of filter.
※ Filter lift may differ according to the product installation area or source water quality.
5. How to replace the filter
Check
for a
leak
Let water
flow for 2~3
minutes.
RESET
BLOCK CARBON BLOCK CARBON
CALCIUM SULFITE ZEOLITE, TOURMALINE
NON-WOVEN FILTER NON-WOVEN FILTER
1. FREE BLOCK CARBON FILTER 2. COMPLEX BLOCK CARBON FILTER

15
※ pH value differs a little with water quality and water pressure
6. How to measure pH /7. Solutions against roblems
6. How to measure pH
7. Solutions against problems
(1) pH: Strength of alkali and acid of Alkaline ionized water, purified water, and
acid ionized water
(2) Fill the transparent containers up to 2/3 separately with alkaline, purified,
and acidic water to be measured, and fall 3~5 drops of pH indicator, and
compare with the color of standard color comparison paper.
(1) Flux control: When source water flux is less or more than standard flux, flux
sensor detects and voice message “Control the flux,” comes out.
(2) Control the flux with a water tap or adaptor valve until the flux control lamp
and voice message stop.
If overcurrent flows in the electrolytic cell, E appears on the LED indicating
window and the product stops. In this case, lower the water quality setting for
use.
- You should not drink water having been used for pH test.
- Please keep pH indicators at a cold, dark place.
- Avoid a place in reach of children or near fire
- If your eye or mouth is stained with pH measuring indicator, immediately rinse with water.
WARNING
Alkaline
water
Purified
water
Acidic
water
Specimen reacted
to the indicator
color comparison
paper
7-1 Flux control
7-2 Overload control of the electrolytic cell
Symptom Operation state
0 liter Operation stop
0~0.6 liter/min or less Water release and flux control message out
0.6~4.0 liter/min Normal operation

16
8. How to use alkaline water / 9. Please check before asking after-sales service
8. How to use alkaline water.
9. Please check before asking after-sales service
8.1 How to drink alkaline water by step
Alkaline water Alkaline water
First user
Child Step 1
Normal users
Child Step 1~2
Adult Step 1 Adult Step 2~4
Patient Step 1 Patient Step 2~5
How to drink Serving per day: 2~3 cups
※ How to drink alkaline water
When drinking first, drink 2~3 cups of Alkaline water of Step 1 a day. If no problem
occurs in the body, it is recommended to raise the step for drinking.
Problems Checking points Solutions
No power
Connecting state of the power code Check the power code and connect again.
Failure cause not identified Turn off the power and water tap, and ask
after-sales service.
Sudden power
off during use
Check power connection and water quality
setting state.
If water quality is incorrectly selected or
the product is used for a long time, the
operation is temporarily stopped by a safety
device to protect the product. If temperature
decreases, it starts to operate. Don’t
worry.
Leak occurs.
Too much flux and high water pressure Control the water tap or adaptor valve.
Too little flux and low water pressure Control the water tap or adaptor valve.
If source water inlet hose is bent Spread the bent part.
If filter is choked (Even though filtering time
is not out, instant inflow of contaminated
water may cause this phenomenon)
Replace the filter.
Water smells
bad.
If filter life is up (Filter life may extremely be
shortened in the bad water quality area) Replace the filter.
Sudden change of water quality or high
chlorine in the city water in summer Use alkaline water of Step 1~2.

17
9. Please check before asking after-sales service
Problems Checking points Solutions
After filling
the bottle with
alkaline water,
precipitates
occur at the
bottom of bottle.
If carbonic acid is rich in source water,
and calcium carbonate is precipitated by
combining it with calcium of ion water
Be assured that it is harmless to human
body in spite of visually unpleasant
appearance. Lower alkaline water to Step
1~2 for use.
Water does not
flow from the
acid water outlet.
Check if water outlet hose is bent. Increase the flux of source water and
spread the bent part.
Leak occurs
Too much leak like flowing water Turn off the power and source valve, and
contact our customer service center.
Leakage from filter connection
Insert the O-ring of the filter connection
correctly
※ Contact our customer service center.
Some or the
whole lamps in
the indicating
window are out.
Some indicating lamps are out. LED PCB failed.
※ Contact our customer service center.
The whole indicating lamps are out. LED PCB failed.
※ Contact our customer service center.
Melody or voice
message does
not come out.
Please check if volume control is deleted. Turn off the power and source valve, and
contact our customer service center.
pH concentration
of acid water is
same as that of
neutral color.
It has been not long since filter
replacement.
It could be for about one week after filter
replacement. Try again after several days.
If you want to use underground water as
source water ※ Contact our customer service center.
pH concentration
of alkaline water
is same as that
of neutral color.
If carbon acid is rich in water or
underground water is used
It resulted from the evaporation of indicator
ingredients due to chemical reaction of free
carbon dioxide in the water. Adjust water
quality selection higher and fall 3~4 drops
of indicator into cup for use.
Others Cause not identified ※ Contact our customer service center.

18
10. Product specification
Product name Alkaline ion water generator
Type name
Manufacturer name and address SLG Co., Ltd. 1526, Chungwon-ro, Pyungtaek-ro, Gyunggi-do
Manufacturer permit no. No. 4663
Item permit no. Permit no. 14-1580
Purpose of use
This device is to generate alkaline ion water of pH 8.5~10.0
by electrolyzing drink water. Drinking alkaline ion water
of hydrogen ion concentration (pH 9.5), helps improve
gastrointestinal symptoms (clinical
Diarrhea, indigestion, abnormal fermentation in the stomach,
hyperacidity).
Rated voltage and rated frequency AC 220V, 60 HZ
Protection type and degree against
the rated power Class 2 device, B type device
Maximum power consumption 450VA
Outside dimensions 300 mm(W) x 135 mm(D) x 325 mm(H)
Product weight 3.7 kg
Permissible water pressure, water
temperature 1.0~5.0 kg/㎠, 5℃~30℃
Control type, Operating method One touch type, City water open/close type
Electrolytic
device
Electrolytic type,
cleaning type Continuous electrolysis, automatic cleaning
Electrolytic steps 5 steps of alkaline water, 5 steps of acid water (30 steps of
water quality selection modes)
Electrode material Platinum plated titanium
Purification
device
Filter replacement
type 카트리지 방식
Effective purification
quantity
No. 1 Free Block Carbon Filter: about 6 months (2,800L
No. 2 Free Block Carbon Filter: about 6 months (5,600L
Filter components
No. 1 Free Block Carbon Filter: PP non-woven cloth, Calcium
sulfite, Block carbon
No. 2 Free Block Carbon Filter: PP non-woven fabric, Zeolite,
Tourmaline, Block carbon
Over-heat protection device Protective circuit embedded
Water supply type Direct connection to the city water

19
QUALITY AND WARRANTY CERTIFICATE
QUALITY AND WARRANTY
CERTIFICATE
1. The product has been approved by KFDA through strict test. We will repair any failure in its
performances and functions having occurred within warranty period free of charge. If repair
is not available, we will replace the failed product.
2. In the following cases, we will repair at a cost regardless of warranty period.
(1) Performance defects and failures if quality warranty period is passed.
(2) Damages occurred by consumer intentionally or negligently
(3) Failures resulted from the repair not by our service center or distributor
(4) If product life is out (as far as such things are included in the user manual)
(5) Failures or defects due to force majeure
(6)If this certificate is lost
Product name Alkaline ion water
generator Type
Manufacturing
no.
Purchase
no.
Customer
name TEL
Customer
address
Sales agent TEL
Belonging to
Branch name - Distributor
_________________________