Slican VPS-902P User manual

IP Phone
VPS-902P
Quick reference
Release 1.00
Last modification date: 2020-02-14

page 2
LEDs
1. Power Indicator: Steady green when power on, blinking green when the call is ringing. Blinking red
when there are new messages.
2. Line Keys:
a. Steady green: During the conversation, or plan to dial a call.
b. Blinking red: The call is ringing.
c. Off: Idle interface.
Calls
1. Place a call (three different modes):
a. Handset: Pick up the handset; enter the number, then press the Send soft key or press #.
b. Speaker: Press or the line keys; enter the number, then press the Send soft key or press
#.
c. Headset: Press ; enter the number, then press the Send soft key or press #.
Note:
You can also use Contacts or call log to dial the number you want, press dial key place
the call by the three ways mentioned. More, you can also alternate to the mode during the
call
2. Answer a call (three different modes):
a. Handset: pick up the handset;
b. Speaker: Press ;
c. Headset: Press .
3. End a call (three different modes):
a. Handset: Hang up the handset or press the Cancel soft key.
b. Speaker: Press or press the Cancel soft key.
c. Headset: Press the Cancel soft key .
UWAGA: You can also reject the call by press the Reject soft key.

page 3
Call transfer
1. Blind trasfer
a. Press or Transfer soft key during the conversation, the call is on hold now.
b. Enter the number that transfers to.
c. Press or Transfer soft key and now the blind transfer competed
2. Attended Transfer
a. Press or Transfer soft key Turing the conversation, the call is on hold now.
b. Enter the number that transfer to and Press the Send soft key or #.
c. Start the second conversation, press or Transfer soft key, then transfer competed
Call conference
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1. Apress Conference soft key, the call is placed on hold.
2. Aenter the number of Cand then press Send soft key or #. Canswers the call.
3. Apress the conference soft key, then A, Band Care now in a conference.
4. If add D&E, A press Hold soft key,current conference is on hold, enter the number of D, and press
Send soft key. Danswer the call. Apress Hold soft key,enter the number of E, and press Send soft
key. Eanswer the call and APress Conference soft key then A, B, C, Di Eare in conference.
Configuration
1. Configuration via Phone interface
a. Press Menu →Setting →Advanced Settings (Default password: admin)
b. Select Network: To configure the Wan Port (DHCP/Static/PPPoE), PC Port etc.
c. Select Accounts: Enable the account, fill in the SIP Server, Outbound Proxy and the SIP
registration information.
2. Configuration via Web interface
a. Get the IP address from the phone: Press Menu→Status→Information.
b. Login: Input the IP address in the web browser. The PC and phone should be in the same IP
address segment (Login name: admin ; Default password: admin)
c. Click on SaveSet and Restart the Phone if needed.
Instruction

page 4
Declaration of conformity available on the website
Correct removal of the prouct (used electrical and electronic equipment
The indication on the product or in the texts referring to it shows that the product after its
expiration should not be disposed of with other wastes coming from households, companies
and institutions. For information on the place and method of environmentally safe recycling
of this product, household users should contact the retail outlet where they purchased the
product or the local authority.
SLICAN Sp. z o.o.
www.slican.com
[e-mail]
[e-mail]
The manufacturer reserves the right to make changes to the product without prior notice.
SLICAN sp. Z.o.o. declares that the VPS-902P device
complies with Directive 2014/30 / EU. The full text of the EU
Declaration of Conformity is available at the Internet
address: www.slican.pl/deklaracje/