SMARDY PH-02 User manual

MANUAL
·

1. Table of Content
2. Included in Packet
3. Instructions
4. Caliberation
5. TechnicalData
1. Table of Content

PH Meter
Storage Case
1
2
2. Included in Packet

3. Instructions
1. Remove the protective cap.
2. Wash the electrode with water.
3. Switch on the meter by pressing the "ON / OFF" button.
(First turn on the meter and then insert the electrode in the solution.)
4. Insert the probe into the solution and wait till the measurement value stops
changing.
5. After use, clean the electrode with clean water (with osmosis or distilled) and
switch of the meter by pressing the "ON / OFF" button.
6. Do not let the probe to dry out: always replace the protective cap after each use.

4. Calibration
Destilled
Water
** Calibration solution not included in the packet.
In order to obtain accurate measurements everytime, make
sure that the device calibrates all xxx. The necessary
calibration solution and instructions can be purchased from a
specialist retailor.

Battery Ordinance: Do not throw used batteries in the garbage. Only
discard these batteries through a specialist dealer or through battery
collection center. This is one of the ways to contribute towards
environmental protection. The battery ordinance urges citizens to
discard used batteries only by special methods or through specially
designed collection bins (legal obligation to return). Enterprenures and
manufacturers have a legal obligation to accept these bateries and to
recycle them or to eliminate them as hazardous waste (legal obligation
to accept returned batteries). We also accept used batteries or used
items with batteries inserted in them.
PH Scale:
from 0.00 ‐14.00 pH
Accuracy:
+/‐0.01 pH
Calibration:
Automatic Calibration
Power:
2x 1.5V (LR44) button cell
batteries
Battery Life:
approx. 500 hrs
Size:
15.5 x 3.1 x 1.8 cm
Weight:
50g
5. Technical Data
These signs are found on
batteries with hazardous matter
Cd = Batteries contain Cadmium
Hg = Batteries contain mercury
Pb = Batteries contain lead