Labino MB Poseiodon L111 User manual

MB Poseiodon
Blue Light
OPERATING INSTRUCTIONS

2
CONTENTS
1. LABINO THE COMPANY 3
2. MODELS AVAILABLE IN MB POSEIDON 4
3. UNPACKING THE EQUIPMENT 4
4. TRANSPORTATION OF THE EQUIPMENT 5
5. HANDLING OF THE EQUIPMENT / INTENDED USE 5
6. SERVICE AND OPERATING INSTRUCTIONS 6
7. TECHNICAL DATA 8
8. STORAGE AND DISPOSAL 8
9. WARNING AND SAFETY 9
10. WARRANTY 10
11. DECLARATION OF CONFORMITY 12
12. LABINO AB QUALITY DECLARATION 15
Rev. A, April 2018

3
1. LABINO THE COMPANY
Labino AB is a Swedish-American, family owned company dedicated to the
development and manufacture of UV lamps since 1994. Since its inception,
Labino AB has been committed to high standards of quality in the design and
manufacture of new innovative products, helping NDT professionals worldwide to
make the world a safer place. Labino AB high quality lights are designed to comply
with all relevant international and ASTM standards, and are distributed to over 55
countries worldwide.
Labino AB lights are used in multiple applications, industrial as well as
non-industrial such as Nondestructive Testing, Medical Laboratories, Crime
Laboratories, Forensics, UV Curing, Leak Detection and others. We are very
condent you will enjoy using our new generation of lights that are much lighter
and more compact than many comparable products on the market today, but
with even more power and higher safety standards. Labino remains committed to
environmentally friendly technologies and materials.
Labino is a proud member of:
ASTM ISO Nadcap ASNT

4
2. MODELS AVAILABLE OF MB POSEIDON
e model and serial number of your specic Labino lamp is found at
the mark plate on the top of the head of your lamp. MB Poseidon is available as
A/C (mains) operated as well as battery operated version.
MAINS OPERATED LIGHTS BATTERY OPERATED LIGHTS
MB Poseidon Mains MB Poseidon Battery
P/N : L111 P/N: L110
MB Poseidon generates an intensity of approximately8 500μW/cm2
(at 38 cm or 15 inches) with a beam diameter of 23 cm2(9 in) with intensity
>1200μW/cm2at 38 cm distance. Battery lifetime is approx. 2.5 hours. e lamp
oers a beam that is extremely homogenous – without any footprints showing
from the LEDs, shades, dark spots or other disturbing defects in the beam.
For information about spare parts and accessories, please visit www.labino.com
3. UNPACKING THE EQUIPMENT
Check that the lamp has not been damaged during transport. In the event of
external damage to the PACKAGE, do not accept the package from the freight
company.
In the event of external damage to the PRODUCT, please contact the supplier
without testing whether the lamp works.
Make sure that no part is missing. If a part is missing, contact your supplier.

5
4. TRANSPORTATION OF THE EQUIPMENT
Warning! Shipping of batteries:
Make sure you ship all products including lithium batteries
according to IATA Dangerous Goods Regulations (DGR). DO
NOT ship broken lithium batteries. Broken batteries shall be
disposed in accordance with local waste disposal regulations.
5. HANDLING OF THE EQUIPMENT / INTENDED USE
Although the lamp is very sturdy, in view of the extensive electronic equipment it
contains, it should nevertheless be treated with a certain amount of care.
e lamp can be switched on and o at any interval.
Waterproof
Tested waterproof classication “IP68 1.1 m, 31 min”, means that the lamp can
withstand water from above without any harmful side-eects. It can be held up to
1.1 meter under water, for up to 31 minutes.
Cleaning – do not disassemble unit for cleaning
Exterior surfaces should be cleaned with a so lint free cloth and mild detergent.
Isopropanol and a microber cloth shall be used to perform the cleaning of the
lters. Disassembly voids warranty.
Temperature
Make sure the unit has good ventilation. Do not mount the unit at a closed
compartment and do not cover any part of the unit. e unit is cooled by
convection to surrounding air, remove all obstacles for ecient convection.
Maximum ambient temperature is 40° C (104° F).
Intended use
Intended use of the equipment is to inspect an object by irradiating the surface
with blue light emitted from the light source (MB Poseidon). e light is specially
designed to perform Non Destructive Testing.
e user should always wear Yellow contrast goggles supplied with the
equipment.

6
6. SERVICE AND OPERATING INSTRUCTIONS
FUNCTIONAL DESCRIPTION
Standard versions:
• Position 1: Blue radiation – Press the switch to activate.
• Position 2: O position – Press the switch a second time to deactivate the lamp.
MAINS OPERATED UNIT
• e external PSU may not be used for purposes/products other than those
prescribed by Labino.
• e external PSU is built for operation from mains (AC). During the
connecting and disconnecting procedure of the PSU, the lamp has to be shut-
o. Aer this procedure, the lamp can be operated as usual.
Mounting:
1. Dry environment: Connect the PSU in a dry location. Mind heat dissipation of
the PSU.
2. Connect: Connect mains cable to mains outlet.
3. Green light: When connected, the LED indicator lights green.
BATTERY OPERATED UNIT
• e Battery must not be used for purposes/products other than those
prescribed by Labino. Battery must not be charged with any charger not
supplied by Labino.
• Voltage: 3.6 V
• Capacity: 3 400 mAh
• Two batteries are required to operate the lamp.
Mounting:
1. Mount the batteries in the handle.
2. Open lid for battery slot by unscrewing the two screws holding the lid.
3. Batteries slides into slot. Mind polarity of batteries.
4. Mount lid by screwing it back on to handle.

7
Battery indicator:
Four colors indicates the status of the battery:
a. Green: over 75 % charged
b.Yellow: 50-75 % charged
c. Orange: 25-50 % charged
d. Red: 10-25 % charged
e. Red blinking: less than 10% charged
MB Poseidon can be used also while the batteries are charging. e LED indicator
shows than the staus of the charging (yellow or green).
Charging by connecting the Power Supply Unit to MB Poseidon:
1. Dry environment: Connect the external PSU in a dry location. Mind heat
dissipation of the PSU.
2. Connect the external Power Supply Unit to the connector in the back of the MB
Poseidon head.
3. Connect mains cable to mains outlet.
4. LED indicator: Shows yellow for charging and changes
to green when the batteries are fully charged.
Charging the batteries in the external battery charger:
1. Dismount batteries by unscrewing the lid on the
handle.
2. Remove batteries from slot.
3. Connect AC adapter to mains outlet.
4. Connect AC adapter circular DC jack to the charger
5. Observe battery polarity when inserting the batteries
into the charger. Misplacement of the batteries in the
charger can damage the charger.
6. Place battery in charging dock and make a gentle push.

8
7. TECHNICAL DATA
Weight Mains operated:
• 702 gr (8.76 oz)
Battery operated:
• without battery: 688 gr (8.27 oz)
• with battery: 781 gr (11.55 oz)
PSU for AC (Mains) version Mains voltage PSU: 100–240 V 50/60 Hz
Output voltage: 11.5 V DC / 3A/40W
Operation status LED: Green
Charger for Battery version Mains voltage PSU: 100–240 V 50/60 Hz
Output voltage: 11.5 V DC / 3A/40W
Operation status LED: Green
Battery 2 x 3.6 VDC
Operating time ≈ 2.5 hrs
Charging time Usage of the external charger charges the batteries fully
within 8 hours.
Usage of the internal charger (via a connector at the
back of the unit) charges the batteries fully within 4
hours.
Irradiation at distance of 15"
(380 mm)
Center ≈ 6 500 µW/cm²
Peak wavelength 440 nm +/- 5 nm
8. STORAGE AND DISPOSAL
• Store MB Poseidon and extra batteries in a dry and cool environment (below
30˚C).
• Store and handle batteries with care, keep away conductive objects that can
short cut batteries.
• Do not dispose battery in re or water.
• Consumed batteries shall be recycled at local waste disposal sites.

9
9. WARNING AND SAFETY
General Irradiation Safety Information
Blue light can cause burn injuries on your eyes. e exposure to light should be
considered with care.
Unprotected and prolonged exposure to high intensities of blue light might
result in skin injuries. Even brief exposure can be hazardous if the eyes are
exposed directly to blue light.
Blue light is Dangerous – Protect yourself!
It is advised to always shield the eyes/face. For maximum protection and whenever
possible hands and arms should also be covered with long sleeves and gloves of a
non-uorescent material.
• Yellow goggles: It is of utter importance to use the protection. To protect eyes –
use Yellow Goggles.
• Gloves: Be sure to use gloves that protect you not only from chemicals or cuts,
but from radiation. And make sure that they do not uoresce.
Sensitivity
Certain individuals are naturally hypersensitive to all forms of light and should
avoid any exposure. In general, if itching, inammation or other unusual
symptoms occur, exposure should cease immediately. People using certain drugs
that produce photosensitivity should avoid exposure to all blue light sources.
Heat
e unit generates heat that needs to dissipate though convection. Do not cover
unit when operating.
Battery Safety!
Never charge the battery with any other charger than the original charger that
comes with delivery. Usage of a non-Labino battery can cause serious damage to
the user and the lamp.

10
Warning! Shipping of batteries. Make sure you ship all
products including lithium batteries according to IATA
Dangerous Goods Regulations (DGR). DO NOT ship broken
lithium batteries. Broken batteries shall be disposed in
accordance with local waste disposal regulations.
10. WARRANTY
Labino AB guaranties that the armatures will be free from defects in manufacture
when delivered. Labino AB’s obligation under this warranty is limited to repairing
or replacing, at the option of Labino AB, any part(s) of the product which, if
properly installed, used and maintained, proves upon factory examination to
have been defective in material or workmanship. is warranty does not apply
to any product or part which (1) is normally consumed in operation or (2) has a
normal life inherently shorter than the stated warranty. In no event shall Labino
AB be liable for special, indirect, incidental or consequential damages, nor for any
damages arising out of delay in shipment or production.
Warranty for a brand new MB Poseidon lamp
• e warranty for a brandnew MB Poseidon lamp is twelve (12) months from
the date of purchase.
• An invoice that shows the actual date of when the lamp was purchased, as well
as the serial number of the actual unit, must be enclosed in the shipment in
order to be able to claim the warranty. If the invoice is not enclosed, Labino will
base the warranty period on the delivery date from Labino to the distributor.
Warranty for a repaired MB Poseidon lamp
• e warranty for MB Poseidon lamp repaired by Labino’s in-house service
center or an authorized Labino service center is three (3) months from the date
it is shipped from Labino’s in-house service center or an authorized Labino
service center, unless the initial warranty is still in force.
Warranty for Labino Spare Parts
• Labino MB Poseidon lamps have essentially one consumable part that
may need to be replaced aer long-term usage: Lithium Ion batteries loses
approximately 20 % performance aer 500 charge cycles.
• Batteries have a warranty of three (3) months.

11
Freight
• Products not under warranty: It is in the responsibility of the customer to pay
for the freight costs to and from Labino’s in-house service center or a local
authorized Labino service center.
• Products under warranty: It is the responsibility of the customer to pay the
freight costs to Labino’s in-house service center or a local authorized Labino
service center. e cost for return freight of goods under warranty sent from
Labino’s in-house service center to distributors or end-users is paid by Labino.
• e method of shipment and choice of carrier is le to the discretion of the
company bearing the freight costs.
Warning! Shipping of batteries. Make sure you ship all
products including lithium batteries according to IATA
Dangerous Goods Regulations (DGR). DO NOT ship
broken lithium batteries. Broken batteries shall be disposed
in accordance with local waste disposal regulations.
Repairs
• If your Labino lamp needs service or repair you may send your lamp to the
nearest local authorized service center. It will benet you with faster service
and reduced freight costs by using your local service center. A complete list of
service center locations can be found on our website at www.labino.com.
• You may also send your lamp to the nearest Labino distributor or the
distributor from whom you purchased your Labino lamp. A complete list of
distributors can be found on our website at www.labino.com.
• If you do not nd a service center or a distributor in your region you can also
send your lamp directly to Labino’s manufacturing department in Sweden.
Labino Manufacturing and Service
Fågelsångsvägen 16, 186 42 Vallentuna, Sweden
Please be sure to send your package with “door-to-door” delivery and mark
export documents with “Return for Repair” if you send the product to Labino.
e package will be returned to the sender if it’s not sent “door-to-door”.
Please make sure to ll out the correct documents for customs clearance,
specifying that it is a return of goods for repair. If you need further assistance
please contact our customer service department in Sweden at [phone] or
send an e-mail to us at labi[email protected].

12
11. DECLARATION OF CONFORMITY
IN ACCORDANCE WITH EN ISO 17050-1:2010
Object of the declaration:
Product: Blue lamp, 440 nm
Model/Type: MB Poseidon Mains
MB Poseidon Battery
Part number: L110 - L111
Manufacturer: Labino AB
Address: Fågelsångsvägen 16, SE-186 42 Vallentuna, Sweden
Tel: [phone] E-mail: labi[email protected]
is declaration is issued under the sole responsibility of the manufacturer.
e Object of the declaration described above is in conformity with the relevant
European Union harmonization legislation:
93/68/EEC e CE Marking Directive
2014/30/EU e Electromagnetic Compatibility Directive
2006/25/EC e Articial Optical Radiation Directive

13
Conformity with the European Union harmonization legislations listed above, is
shown by compliance with the applicable requirements of the following standards:
Reference and Date Title
Notied Body or
Test Lab
EN 61326-1:2013/IEC
61326-1:2012 Class B
EMC – Emission – Conducted and
Radiated Disturbance.
Kemet, Sweden
örnblads väg 6
386 90 Färjestaden
SWEDEN
EN 61326-1:2013/IEC
61326-1:2012
EMC – Immunity – Electrostatic
discharge, Radiated radio-freq.
electromagnetic eld, Fast
transient/burst, Surge, Induced
radio-freq. voltage, Power
frequency magnetic eld and
Voltage dips and interruptions.
EN 61000-3-2:2006 +
A1:2009 + A2:2009
EMC – Harmonics
EN 61000-3-3:2008 EMC – Flicker
IEC / EN 62471:2008 Photobiological safety of lamps
and lamp systems
RISE, Research
Institutes
of Sweden,
Brinellgatan 4
504 62 Borås
SWEDEN
EN 60529:1991
+ A1:2000 + A2:2013
IEC 60529:1989 +
A1:1999 + A2:2013
Enclosure IP68
1.1 m, 31 min
e Object of the declaration described above is in conformity with the
manufacturers requirements required for Nondestructive Testing listed below:
Reference and Date Title
Notied Body or
Test Lab
SIS-CEN TR
16638:2014
Nondestructive Testing –
Penetrant and Magnetic
Particle testing using
Blue Light
Labino AB
Fågelsångsvägen 16
186 42 Vallentuna
SWEDEN

14
Additional Information: is Declaration of Conformity complies with the
requirements of our ISO 9001:2015 Management System.
For and on behalf of Labino AB:
Lisel Athanasiadis
Managing Director
Place of Issue: Fågelsångsvägen 16, Vallentuna, Sweden
First Issued: 19 April 2018

15
12. LABINO AB QUALITY DECLARATION
Labino Quality Management Systems:
Labino is certied in accordance with ISO 9001:2015
Standards Certifying body Regarding
ISO 9001:2015 DNV, Sweden Management Quality System
ISO/IEC 80079-34 Intertek, UK
Cleeve Road
Leatherhead,
Surrey KT2275B
GREAT BRITAIN
Explosive Atmospheres – Application
of quality systems for equipment
manufacture
Quality Control in Factory
Labino Quality Declaration certies that:
1. International and valid standards have been applied to when designing and
manufacturing our products.
2. A quality control system is in place and is being used in our organization.
3. A comprehensive quality test has been performed on this product before being
shipped from our factory.
e lamp has been assembled and tested in accordance with:
Labino Quality System (Unit test report attached)
Engineer performing nal inspection and test report:
Martin Lindquist Kim Johansson Kent Eriksson
Örjan Lindquist Joakim Vestin
Signature:
Date of manufacturing:
Company Signature/ Stamp:

DISTRIBUTOR:
Labino AB shall not be held liable for any errors or omissions
resulting from the test procedures that were used in validating
performance of any Labino AB product nor for unforeseen errors
or omissions in digital or printed material.
www.labino.com
MB Poseiodon Blue Light Operating Instructions, revision A, April 2018, Vallentuna