SMARDY TDS-3 User manual

Manual
·

1. Table of Content
2. Included in Packet
3. TDS Background
4. Caliberation
5. Technical Data
1. Table of Content

TDS Meter
Storage Case
2. Included in Packet

TDS is the abbreviation for “Total Dissolved Solids”.It shows you the number
of dissolved particles per 1 million water particles (approx. 1 milliliter). This
value is expressedin ppm (parts per million).
This offers a simple way to verify the operation of a reverse osmosis
system.
0 -50 ppm: The system works well. (Depending on the quality of
inlet water, the upper limit can also be more than 50 ppm).
50 -100 ppm: Membraneandfilterneedsto be replaced.
The TDS meter measures the conductivity in the water and estimates the
number of particles not made of water molecules. Although, the device
cannot determine the actual type of the particles.
The TDS meter cannot determine the actual type of the particles found in
water.
It cannot determine whether they are harmless substances (sodium,
carbonic acid, etc.) or hazardous substances such as pesticides, drug
residues or nitrate.
Therefore, it cannot give a confirm statement about the pollutant fraction
in the water.
Since the filter process rapidly dissolves CO2 in the waterand thus reacts to
carbonic acid, the ppm value will always be somewhat above 0 and rise
over time.
3. TDS Background

•Put the TDS meterin the waterand presson the ON / OFF button.
•Now you can read the measurement –Press the Hold key to save the
value.
•Take a clean glass and fill it will some osmosis water or tap
water
4. Instructions

Battery Ordinance: Do not throw used batteries in the garbage. Only
discard these batteries through a specialist dealer or through battery
collection center. This is one of the ways to contribute towards
environmental protection. The battery ordinance urges citizens to discard
used batteries only by special methods or through specially designed
collection bins (legal obligation to return). Entrepreneurs and
manufacturers have a legal obligation to accept these batteries and to
recycle them or to eliminate them as hazardous waste (legal obligation to
accept returned batteries). We also accept used batteries or used items
with batteries inserted in them.
TDS Scale: from 0‐9990 ppm
Accuracy: +/‐2%
Calibration: Calibrates with NACI 342
ppm
Power: 2x 1.5V button cell
batteries
Battery Life: approx. 1000 hrs
Size: 15.5 x 3.1 x 2.3 cm
Weight: 76.5g with storage case
5. Technical Data
These signs are found on
batteries with hazardous matter
Cd = Batteries contain Cadmium
Hg = Batteries contain mercury
Pb = Batteries contain lead