smart acoustic SRF200 User manual

OPERATION MANUAL
SRF200 - PORTABLE REFLECTION FILTER
SRF200 MANUAL_105x148_update.indd 1SRF200 MANUAL_105x148_update.indd 1 4/01/2021 3:25:15 PM4/01/2021 3:25:15 PM

02. Specications
The SRF200 is a portable reection lter comprised of an outer
composite panel, a wool fabric layer and an inner acoustic-foam
- a unique, 3-layer design that imparts near-zero sonic coloration
to your tracks. Adjust the horizontal and vertical link so you can
place the microphone in the correct position.
01. Features
• Lightweight and rugged materials
• Telescopic link • Easily Installed
• Net Weight: 1576g
• Length: 406mm
• Width: 215mm
• Height: 312mm
• Shell: ABS
COMPONENTS
A. Reection lter
B. Extension bar;
C. Threaded thumbscrew for screen;
D. Threaded thumbscrew for mic;
SRF200 MANUAL_105x148_update.indd 2SRF200 MANUAL_105x148_update.indd 2 4/01/2021 3:25:16 PM4/01/2021 3:25:16 PM

03. Assembly Instructions
3. The reection lter may be used
with a studio boom that features
a down extension. Assembly is
the same except the lter and
microphone are inverted.
4. If your microphone is too long,
you can directly connect
microphone to threaded
thumbscrew for microphone (D)
2. Connect threaded thumbscrews
for mic (D) through the extension
bar (B)
1. Attach extension bar (B) to the
reection lter using two threaded
thumbscrews (C)
SRF200 MANUAL_105x148_update.indd 3SRF200 MANUAL_105x148_update.indd 3 4/01/2021 3:25:17 PM4/01/2021 3:25:17 PM

04. Adjustment Instructions
•
Loosen two threaded thumbscrews for screw (C) which is xed on the back of
microphone screen (A), you can vertically adjust the position of reection lter (A)
to the correct position, then you can x two threaded thumbscrew for screen (C);
•
Loosen threaded thumbscrew for microphone (D), you can horizontally adjust the
position of microphone through extension bar (B). Until the microphone is in the
proper position, then you can x threaded thumbscrew for microphone(D);
•
After nishing the above steps, you can begin recording. If you are still unsatised
with the position, you can use the above steps re-adjust the position, until you get
your desired position.
SRF200 MANUAL_105x148_update.indd 4SRF200 MANUAL_105x148_update.indd 4 4/01/2021 3:25:17 PM4/01/2021 3:25:17 PM