1 Box contents
Make sure you receive all items of your shipment:
• One ATCA-7360-HDDx-yyy
When installing or servicing the system or accessories,
strictly observe the safety precautions in the
RTM-ATCA-7360 Installation and Use manual. Ignoring
these instructions can void the system warranty and
cause personal injury or property damage.
2 ESD
Electrostatic discharge and incorrect installation or
removal of the card can damage circuit or shorten its life.
Use a properly grounded ESD wrist strap or work in an
ESD-safe environment.
Connect to the ESD connector at the front or the rear of
the system.
3 Site preparation
Make sure that all environmental and power requirements defined in
the RTM-ATCA-7360 Installation and Use manual are met.
Operating temperatures refer to the temperature of the air circulating
around the blade and not to the actual component temperature.
4 Install the hard disk
module
1. Remove the HDD slot cover of the RTM by loosening and
removing the screws that attach the plate to the RTM.
2. With the HDD slot cover removed, align the hard disk module to
the guiding rails of the hard disk slot.
3. Insert the hard disk module into the slot until it is fully inserted.
4. Tighten the two thumb screws of the hard disk module.
5. Take all necessary steps in your operating system to make the
hard disk operable (the steps depend on the OS you are using).
5 Ordering information
(a) HDD kit option for RTM-ATCA-7360 and RTM-ATCA-7360-L
ATCA-7360-HDDx-yyy
Quick Start Guide
P/N: 6806800K51E November 2019
Table 1: HDD for the RTM-ATCA-7360
Accessory Description
ATCA7360-HDD1-SAS 147GB SAS HDD for the
RTM-ATCA-7360(a)
ATCA7360-HDD2-SAS 300GB SAS HDD for the
RTM-ATCA-7360(a)
ATCA7360-HDD3-SATA 80GB SATA HDD (ext. temp.)
for the RTM-ATCA-7360(a)
ATCA7360-HDD4-SAS 600GB SAS HDD for the
RTM-ATCA-7360
Technical Assistance
For technical assistance or to report product damage or shortages,
contact your local SMART Embedded Computing sales
representative or visit https://www.smartembedded.com/ec/support/.
Get More Information
For more information on this product, see the
RTM-ATCA-7360 Installation and Use manual and
other related technical documentation, which can be
found by using the Documentation Search at
https://www.smartembedded.com/ec/support/.
© 2019 SMART Embedded Computing™, Inc. All rights reserved. The stylized “S” and
“SMART” is a registered trademark of SMART Modular Technologies, Inc. and “SMART
Embedded Computing” and the SMART Embedded Computing logo are trademarks of
SMART Modular Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. These materials are
provided by SMART Embedded Computing as a service to its customers and may be used
for informational purposes only. For full legal terms and conditions, visit
www.smartembedded.com/ec/legal.
