
Wireless access method
The device is placed from a position close to the router.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.Any changes or modifications not expressly
approved by the party responsible for compliancecould void the user's authority
to operate the equipment.NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation.If this equipment does cause harmful interference to
radio or television reception,which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installedand operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
FCC WARNING
Or you can open the APP-About Me-FAQ.
View corresponding solutions.
What to do if the device is offline and cannot be played?
According to the status of the indicator, self-test can be completed:
FAQ
Indicator status
Red light flashes slowly
Red and blue lights flash
slowly alternately
The blue light flashes quickly and
then changes to slow flashing
Steady blue light
Blue light flashes slowly
Red light flashes quickly
Device status
The device is powered on
The device is waiting to
configure the network
The device is configuring
the network
The device is successfully
connected to the network
Network Offline
Device to factory settings
Device firmware upgrade
Cloud storage
Motion Detection
Two-way voice
24/7 monitoring
TF card local storage
After cloud storage is turned on, emergency video information can
be saved in a cloud server. Avoid data loss or damage.
Support to capture moving objects and automatically trigger recording
of 10S short video. Push APP alarm information in real-time.
support voice function while watching videos online. Also available
online two-way conversation.
Built-in IRCUT device, coupled with photosensitive components,
to achieve 24/7 HD video viewing.
Built-in TF card slot, users can also save the recorded video
on the local TF card.
Device sharing
You can share the device bound to your account to family and friends for
common use. Can be revoked at any time share, you are an administrator.
Advanced Features
123
10 11
456
78 9
Click "Add Device" or "+" Select device type Select power cable type
Select setup mode Camera setup Wi-Fi Setting
Type WiFi password
Wi-Fi setup Wait for connection Pair succeeded
Connection complete
The device is online Live video interface
* If the wireless network connection fails, please follow the APP
guide to re-configure the network.