Smart Tweezers Iskra ST5L User manual

MODEL: Iskra ST5L
 Press the control to turn on.
 The device powers o automacally
if it is idle for about 60 seconds.
 To reset test parameters to defaults press
the control for about 2 seconds and release.
 To change the test current move the device
control UP or DOWN.
 To switch through test pulse duraons move
the control to the LEFT.
 To switch through test modes move the
control to the RIGHT.
 Connect the test leads to the LED contacts.
 In the A mode diode polarity and forward
voltage drop value are displayed and the LED
lights up at the preset current.
 In the M xed modes the forward voltage drop
is displayed for forward connecons.
 In the M bidireconal mode a forward voltage
drop is displayed for each direcon.
Tesng LEDs
0.1, 1, 2, 5, 10, 20, 30 mA
A
M
M
M
Defaults
10,
50,
100,
250,
500 mS,
1 sec
RIGHT
LEFT
UP
DOWN
A Automatic Polarity Detection
M Fixed Positive Signal
M Fixed Negative Signal
M Bidirectional LED Testing
Testing modes:

MODEL: Iskra ST5L
Display Layout
 Automac A Mode
 Diode polarity will be automacally detected
 Fixed polarity M Posive mode
 The sign indicates the preset test leads polarity
 Fixed polarity M Negave mode
 The sign indicates the preset test leads polarity
 Fixed Bi-direconal M mode
 Voltage drop is displayed for each direcon