SmartAccess C10SAVK2 User manual

Video Intercom User Manual
C10SAVK2
C10SAVK3

2
System Overview
C10SAVK2:
Contents: 1 x C10SAVEP2 outdoor station, 1 x C10SAVM2 hands free video monitor, 1 x power supply.
Additional components may be purchased as follows:
 Hands free video monitor - C10SAVM2 (max. 4 per system)
 Entrance panel - C10SAVEP2 (max. 2 per system)
C10SAVK3:
Contents: 1 x C10SAVEP2 outdoor station, 1 x C10SAVM3 hands free video monitor, 1 x power supply.
Additional components may be purchased as follows:
 Hands free video monitor - C10SAVM3 (max. 4 per system)
 Entrance panel - C10SAVEP2 (max. 2 per system)
CCD camera
Speaker
Call button
Microphone
Colour
Brightness
Call Volume
Door Monitoring
Door Release
Answer Call
Microphone
CCD camera
Speaker
Call button
Microphone
Ringer volume
Call Volume
Colour
Brightness
Answer call
Door release
Call transfer / internal call
Door monitoring

3
System Configuration
Notes
 The system should be wired using standard 4 core alarm cable
 CAT5 cable is not recommended
 The system supports up to a maximum of two door stations
 The system supports up to a maximum of 4 hands free video monitors
 A DC14.5V transformer is required for every hands free video monitor on the system
 The maximum distance from the door station to the last monitor is 70 meters
 Wire in series as above

4
Outdoor Station Mounting Instructions
1. Remove the door station from its rain shield by removing the screw at the base of the unit.
2. Mark and drill 2 holes to mount the rain shield.
3. Insert the rawl plugs supplied and mount the rain shield using the screws supplied.
4. Attach the door station to its rain shield and secure using the screw at the base of the unit.

5
Sample Wiring Diagram
One entrance panel - two monitors
DC14.5V
Transformer
DC14.5V
Transformer

6
Sample Wiring Diagram
Two entrance panels - one monitor
DC14.5V
Transformer

7
Operating Instructions
1. Call - Visitor pushes call button
2. All video monitors ring and display the live camera image
3. Answer - To speak to the visitor, press this button
4. Door release - Press this button to release the door
5. Monitoring - When the system is in standby, press this button to
view door 1.
Press again to view door 2 (if connected).
Pressing this button will toggle between door 1, door 2 and
monitor standby.
Note: audio is not activated.

8
Specifications
C10SAVEP2 Outdoor Station
Camera:
Lens:
Dimensions:
Back Light:
Power Supply:
Operating Temperature:
Weather Resistance:
Door Release:
Colour 1/3” CCD
3.6mm
135 x 58.5 x 40mm
4 LEDs
Power from monitor
-20°C to 70°C
IP45
Dry Contact
N/O going N/C
Duration 3 seconds
C10SAVM2 Hands Free Video Monitor
Monitor:
Resolution:
Dimensions:
Power Supply:
Power Consumption:
Operating Temperature:
4” TFT LCD colour
960 x 234
190 x 113 x 43
14.5V DC (PSU included)
Standby 70mA
Online 700mA
0°C to 70°C
C10SAVM3 Hands Free Video Monitor
Monitor:
Resolution:
Dimensions:
Power Supply:
Power Consumption:
Operating Temperature:
7” TFT LCD colour
480 x 234
241 x 161 x 23
14.5V DC (PSU included)
Standby 90mA
Online 600mA
0°C to 70°C