Smartenit Harmony G2 User manual

Technical Support
[e-mail]
© 2019-2022, Smartenit, Inc.—Rev 1.1 04/25/2022
Harmony G2 and Smartenit are trademarks of Smartenit, Inc.
Zigbee is a registered trademark of the zigbee alliance
Product Guide
1
Harmony G2 Model #6007E Home Automation Gateway/Hub
About this Product (Small and Mighty!)
Your Harmony G2 is a stand-alone gateway/hub that provides monitoring and
control of Home Automation (IoT) devices from any computer or mobile device
(Android or iOS). The hub operates without an internet service (cloud) which is
only needed when connecting from remote locations (outside the local area net-
work). Beyond connectivity to home automation devices that use your local net-
work directly (WiFi), the gateway can support zigbee, Insteon and X10. Specify the
desired compatibility interfaces when ordering. Some interfaces may use one of
the two USB ports provided.
Our free app makes for easy and convenient installation and operation and is
available from the Google Play and Apple App Stores. Search for keyword
“Smartenit”. The app’s intuitive and rich functionality provides, among other
things, control of devices on demand, scenes set up, and the set up of automated
schedules based on a variety of conditions.
Special note: All users continue with this guide. X10 users can nd addi-
tional help by downloading the X10_Harmony.pdf found on the Harmony
G2 product page in the Resources tab or linked here.
Plug to EV
Installation
1. Connect any applicable interface (zigbee stick and/or Insteon/X10 PLM) device to one of
the two USB ports. The zigbee interface is also built internally in some congurations.
2. When using the Ethernet (wired) Connection: Connect one end of the supplied Ethernet
cable to your Ethernet switch/router and the other end into your Harmony G2.
3. Connect your Harmony G2 to DC power source with the supplied 5VDC 2A
power supply.
4. IMPORTANT: When connecting for the rst time, the G2 establishes a connection to our
IoT server and does its initial registration. This process may take up to 5 minutes. Please
wait some time before attempting to add the gateway to your app.
5. There is no “Factory Reset” method provided. Once joined to your account, deleting the
gateway will do the factory reset if you want to replace it or physically move it.
Account and Network Setup
3) For WiFi Connection: click on
”Gateways/Hubs”, then select
“Harmony G2” from the list of
hubs. Next, click on “Add Now” and
select WiFi from the options pop-
up. Follow the steps in the
“Connect via WiFi” section below to
connect your G2 to the desired
network.
2) Add Gateway: Click either the
“Add Devices” button from the
dashboard or the green (+) sign on
the top right of the screen to add
your gateway. If using Ethernet,
You should see “Found 1 device”,
which will be your gateway. go to
step 4.
1) Sign In/Sign up: If you already
have a Smartenit account, sign in
with your username and pass-
word, otherwise sign up for a new
account.
If signing up for a new account,
enter the appropriate elds and
continue to next step.
4) Click in the green box to select
your gateway, then click the “Done”
button. The gateway may take a
minute to install and connect with
the app. Do not proceed until the
small dot next to the gateway
name goes from blinking orange to
solid green.

Technical Support
[e-mail]
© 2019-2022, Smartenit, Inc.—Rev 1.1 04/25/2022
Harmony G2 and Smartenit are trademarks of Smartenit, Inc.
Zigbee is a registered trademark of the zigbee alliance
Product Guide
2
Harmony G2 Model #6007E Home Automation Gateway/Hub
Adding an Automation Rule (used to automate smart device states based on another device status and/or time of day)
Click on the (+) icon in the “Actions”
window to add an action to occur
when condition(s) is/are met.
Follow the prompts in the app to
add an action, then save the Ac-
tion.
Give the Rule a name, then click
the (+) icon in the “Conditions”
window to add each condition and
follow the prompts in the app.
Save the Condition.
From the the side menu icon select
“Automation Rules”. Once in the
Rules menu, click the (+) icon to
add a new Automation Rule.
After Automation Rule is complete,
you can review the Conditions and
Actions for the Rule
WiFi Connection Setup (Continued from Step 3)
3c) Select the desired WiFi network
and provide the required creden-
tials so the gateway can use it.
Once connected to this network,
the gateway will initiate its registra-
tion with our IoT server.
3b) Carefully follow the directions
to connect your mobile device to
the hub access point so it can
connect to your WiFi. Then return
to the Smartenit app to complete
the rest of the setup. Ensure the
selected network is the same your
mobile device is using.
3a) Upon selecting the Harmony
G2, in the “Ready to Add” dialog
click on the large green “Add Now”
button. Then select “WiFi” from the
subsequent Options pop-up.
3d) Once the gateway shows up on
the dashboard and the indicator
dot turns solid green, proceed to
add devices and set your automa-
tion rules.
Adding a Device
1. Click on the (+) button on the
top right menu and select
“Devices”.
2. In this example we will add an
Insteon LampLinc by the
pushbutton method. Press on
the link button on the LampLinc
until a short chirp is heard.
3. The LampLinc is found. Click on
“Found 1 Device”, then click on
”Done” , then “Continue to Dash-
board”. The device card will
show.