Brookstone BKSBEDI User manual

For more products please visit www.brookstone.com
FCC ID: 2AFNL-TYWE3S
USER MANUAL
Smart Edison Bulb

For more products please visit www.brookstone.com
FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.

For more products please visit www.brookstone.com
SPECIFICATIONS
Model: BKSBEDI
Bulb Type: A19
Socket Type: E26
Operating Voltage: AC120V
Power: 6W
CCT: 2700K
Lumen Flux: 600LM
Watt Equivalent: 40W
Wireless type: Wi-Fi 2.4GHz
Wireless Standard: IEEE 802.11b/g/n
Lampholder: E26
Bulb Size: 115x60mm
Ra: >90Ra
WARRANTY INFORMATION
One Year Limited Warranty.
Customer Service: 732-994-2301; email: [email protected]
©Smartpoint LLC,
250 Liberty Street Metuchen NJ, Suite 1A
The BROOKSTONE trademark. names and logos are owned by
BKST Brand Holdings LLC ©2020. All rights reserved.
Manufactured, marketed and distributed by Smartpoint LLC, under license.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google and Google Play are trademarks of Google LLC.
App Store
®
is a registered trademark of Apple, Inc.
All trademarks and registered trademarks are property of their respective owners.
Made in China

FEATURES
• Wi-Fi remote controlled
• Dimmable & Programmable with Schedule
• App and Voice Control
• Works with Hey Google or Amazon Alexa

DOWNLOAD APP
Brookstone Smart
1. Android: download “Brookstone Smart” app
on GooglePlay.
2. iPhone: download “Brookstone Smart” app
from the App Store.

REGISTRATION AND LOGIN
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.

ADD DEVICE
1. Screw Smart Edison Bulb into light socket
until light turns on. Then unscrew until light
turns off. Repeat process 5-6 times and you
will see the light bulb begin to blink rapidly.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the “Smart Bulb”.

5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
4. Confirm Smart Edison Bulb is blinking and press
the “confirm indicator rapidly blinks” button.

6. Connecting process will begin. Do not unscrew
Smart Edison Bulb or turn off phone while
connecting. Wait for connection process to
complete.
7. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Smart Edison Bulb is ready for use.

6. Connecting process will begin. Do not unscrew
Smart Edison Bulb or turn off phone while
connecting. Wait for connection process to
complete.
7. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Smart Edison Bulb is ready for use.
CONTROLLING THE DEVICE
There are three main features of the bulb.
On/Off, brightness, and setting a schedule. All of these
features can be found at the bottom of the app screen when
the bulb is selected.
The center button turns the bulb on and off.
The button at the bottom left adjusts brightness.
The button at the bottom right is used to set a schedule.

PUSH NOTIFICATIONS
1. You can turn on/off notifications for all devices
connected to app by clicking on the “Me” button at the
bottom right of the screen.
2. Then click on ”Settings” button. From there you can turn
on/off all notifications.

REMOVE A DEVICE
1. From the home screen, click on the device you would like
to remove.
2. Then click on the edit symbol on the top right of the
screen.
3. From there you would then click the “Remove Device”
button at the bottom of the screen.

Please make sure that your Alexa app is
connected to your Amazon Echo and both
work together successfully on your Wi-Fi
home network.
Step A. Log into your Alexa app, tap top left
corner, and tap “Skills”.
How to control the Smart Bulb with Amazon Alexa

Step E. Wait a few seconds for Alexa to detect the Smart Edsion
Bulb from the Brookstone Smart app and you will find the device
named “Smart Bulb” has been paired to Alexa app from
“Brookstone Smart” app.
When you click on a device you can then name them what you
choose.
Step D. Once your Brookstone Smart account is successfully
linked to Alexa, the next page will pop up. Tap ”Done” on the
top left corner, then tap “Discover Devices” on the next page.
Step B. Type “Brookstone Smart”, find “Brookstone Smart”
app in the search results and tap “enable” button.
Step C. Enter your account info for the “Brookstone
Smart” app, tap “Link Now”, then tap “Authorize” on the
next page to link Brookstone Smart account to Alexa.
How to control the Smart Bulb with Amazon Alexa

Step E. Wait a few seconds for Alexa to detect the Smart Edsion
Bulb from the Brookstone Smart app and you will find the device
named “Smart Bulb” has been paired to Alexa app from
“Brookstone Smart” app.
When you click on a device you can then name them what you
choose.

Step E. Wait a few seconds for Alexa to detect the Smart Edsion
Bulb from the Brookstone Smart app and you will find the device
named “Smart Bulb” has been paired to Alexa app from
“Brookstone Smart” app.
When you click on a device you can then name them what you
choose.
After Step E is done, you can now control the Smart Edison Bulb
with Alexa app from the devices page.
Step F. Now you are able to control the Smart Edison
Bulb via Amazon Alexa.
Try these commands and see what happens by
asking Alexa:
• Alexa, turn on “Smart Bulb”
• Alexa, turn off “Smart Bulb”
Note: The device name is the one you give to the
smart plug on “Brookstone Smart” app. Let’s name it
“Living Room”.
For example, now you can say:
• “Alexa, turn on Living Room”,
• “Alexa, turn off Living Room”, etc.
If you also want to control the smart bulb with Google
Home, you can continue to read next page.

1. Pair Smart Bulb with Brookstone Smart
App and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
account info.
Step A. Once you are logged into your Google Home App, you
should see buttons at the top to connect your Brookstone
Smart account to the Google Home App.
Step B. Tap the Brookstone Smart button to link your
account with the Google Assistant.
How to control the Smart Bulb with Google Assistant

1. Pair Smart Bulb with Brookstone Smart
App and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
account info.
Step C. Enter your account info for the “Brookstone Smart”
app, tap “Link now”, then tap “Authorize” on the next
page to link your Brookstone Smart account to the Google
Assistant.
How to control the Smart Bulb with Google Assistant

Step D. You will find that the Google Assistant has found
the device named ”Smart Bulb” on this page.
Scroll down on the home page to see the devices linked to
you. You can now control the device through the Google
Home App.

Step E. You also are able to control the Smart Bulb
with Google Assistant.
Just start with “Hey Google”.
“Turn on Sma Bulb”
“Turn o Sma Bulb”
Note: The device name is the one you give to the
switch on “Brookstone Smart” App . Let’s name it “Living
Room”.
For example:
“Turn on Living Room”
“Turn o Living Room”