Lanberg SM01-WPS34 User manual

SMART Wi-Fi POWER STRIP
3 X UNI-SCHUKO OUTLET 4 USB PORT
LISTWA SMART Wi-Fi
3 X GNIAZDO SCHUKO 4 PORTY USB
MANUAL / INSTRUKCJA OBSŁUGI
Stab e Wi-Fi 2.4GHz connection is required for the device to work
proper y.
Aby urządzenie działało poprawnie, wymagane jest stabi ne
połączenie Wi-Fi 2.4GHz.

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
2
Contents
A. Safety precautions .................................................................... 2
B. Product description ................................................................... 3
C. Product introduction and e ements description ....................... 3
D. Insta ation ................................................................................ 4
E. Power ........................................................................................ 4
F. Power strip defau t settings reset ............................................. 4
G. Using TuyaSmart app ................................................................ 5
H. Pairing with TuyaSmart app ...................................................... 8
I. Avai ab e settings for devices added via TuyaSmart................ 11
J. Product specification ............................................................... 12
K. Warranty ................................................................................. 13
A. Safety precautions
1. Do not p ug this power strip into an existing surge protector
or power strip. This practice is ca ed "daisy chaining" or
"piggy backing" and can ead to serious prob ems.
2. If at any time the power strip or p ug strip is too hot, remove
and rep ace the unit. The e ectrica oad for this strip shou d
be eva uated for over oading.
3. This device is for indoor use on y. Operating temperature
shou d be within -20-60°C. Avoid direct contact with water,

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
3
as it wi cause serious damages, render the product use ess
or even threaten the ife of user.
4. Stab e Wi-Fi connection – 2.4Ghz band is required for the
device to work proper y.
5. P ease contact the se er / distributor for assistance, if there
is any prob em with this product. Do not try to disassemb e
or repair the product yourse f, without authority.
6. P ease do not short-circuit the product.
7. Dispose of the product proper y. It shou d be disposed a ong
with e ectronic waste.
B. Product description
Thank you for purchasing Lanberg Smart power strip.
The fo owing product is an inte igent, easy-to-insta power strip
with 3 Uni-Schuko (Type-F) out ets (10A) and 4 USB ports (each
2.4A max.).
Every sing e avai ab e out et, port can be managed remote y via
“TuyaSmart” app.
C. Product introduction and elements description
What is inside f the b x?
Packaging contains: Smart power strip × 1, Manua × 1, P astic pin
cover x 1.

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
4
D. Installation
1. Take Lanberg Smart power strip out of the packaging.
2. Connect the product to mains (AC). Do not connect this
power strip to another surge protector / power strip.
3. To pair this Lanberg device with “TuyaSmart” app fo ow the
instructions from point H: Pairing with TuyaSmart app.
Imp rtant n te:
Do not insta in p aces with direct contact with water or iquid-
based substances. Any exposure to them may ead to serious
product damage or render the Smart power strip use ess.
E. Power
Before using Lanberg Smart power strip, connect it to the AC
power source (mains / wa -mount out et etc.). The required
power is: 100-240V AC, 50-60Hz.
F. Power strip default settings reset
ON / OFF switch found on the power strip’s pane can a so
be used as a Reset button. To do it press and ho d it for at east
5 seconds. If the power switch starts f ashing the operation was
successfu .

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
5
G. Using uyaSmart app
Lanberg Smart power strip supports externa mobi e devices,
such as smartphones, tab ets etc., with iOS 10.0 / Android 5.0
operating systems or newer.
App can be d wnl aded in tw ways:
1. Down oad the App from Goog e P ay or App Store.
a. Android mobi e device: Type and search “TuyaSmart” in
G gle Play.
b. iOS mobi e devices: Type and search “TuyaSmart” in App
St re.
2. Use the QR c de, on the next page, avai ab e for devices
with the iOS or Android operating systems.
Imp rtant n te: After scanning the QR code,
the defau t browser window wi open (e.g.
Safari). In the new y opened window, c ick
"D wnl ad" and then se ect the option to
open using the
App Store / Goog e P ay to down oad the
app ication.

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
6
"TuyaSmart" user acc unt registrati n
1. Open ”TuyaSmart” App insta ed on your
mobi e device.
2. Se ect the option "Register" to create a
new user account.
3. In the next window, se ect the "Email"
or "Ph ne" tab to choose the method of
obtaining the verification code. Fi in the correct data and
press the "Obtain verificati n c de" button to get the code.

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
7
4. You wi receive a 6-digit verification code via given the E-
mai address or mobi e number.
N te: 60 seconds are required to enter the code. After this time
e apses, se ect "Resend" high ighted in b ue.
5. Set the access password for your account. The password
must contain between 6 and 20 characters. In addition, it
must a so contain etters and numbers.
6. Create your "Family", a ist of smart devices compatib e with
“TuyaSmart” App.

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
8
H. Pairing with uyaSmart app
•Establishing Wi-Fi c nnecti n
1. Connect Lanberg Smart power strip to mains (AC).
2. Make sure the externa mobi e device is a so connected to
the Wi-Fi router.
•Adding new devices
1. After ogging in to your account, open the "TuyaSmart"
app ication. Then press the "+" symbo to add a new device.
2. Se ect the "Electrical" tab, then c ick on the se ected device,
e.g. "Multiple S cket”.
3. Prepare and insta Lanberg Smart Wi-Fi power strip to
mains. Initiate product’s pairing mode by pressing and
ho ding the power button for at east 5 seconds. Master
switch shou d start f ashing rapid y.

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
9
4. Enter the password for your oca Wi-Fi network. Make sure
that Smart IP camera or any other product compatib e with
the "TuyaSmart" app ication are in c ose proximity to each
other. within the same network.
N te: Current y on y Wi-Fi 2.4Ghz frequency is supported.
5Ghz band compatibi ity is not yet avai ab e.
5. Next the product wi connect to the app ication. This
process may take a few seconds to comp ete. When the
connection status reaches 100%, the device wi be correct y
added to “TuyaSmart”.

MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP | ENG / p
10
6. New y added product’s current status can be checked via the
App.
7. In the main menu, after se ecting the "All devices" tab, you
can see a devices that have been added previous y.
8. C ick on the power strip icon and the fo owing window wi
open. Using it you are ab e to e.g. contro a the out ets,
ports at the same time or each one individua y.