SmartMat Quick Start Manual
Under the default settings, email alert generates when the remaining weight falls behind
the preset threshold. If you want to receive the email alert when the remaining weight exceeds
the preset threshold, change the Remaining Mode to “Increase”.
d. Notification and Auto-Order Settings
Once the alert/order setting is complete, automatic notification/order is being initiated at
the preset threshold parameter.
d1. Auto Web-Order d2. Auto Email Order
Enter ID/PWD of the designated EC shops *
Customization required. Please contact us
Enter email address (Up to 3)
Enter email templates / Contents
Enter fax number (no hyphen, up to 3) & templates
Enter email address (Up to 3)
* eFax subscription required. Please contact us
e. Add the Mat Location (Optional)
Adding mat location is optional and not mandatory; however the management and sort-out function
based on the location is available once the location is set. SmartMat can automatically sum-up the
products where 1) the location is the same and 2) the measured products are the same.
e1. Add the Location Master Data
Location master is comprised of 3 layers (Large, Middle and Small) and therefore you can manage
the 3 layers based on your inventory management requirements. (Example: Office name (L), Room
name (M), Detailed Location (S))
* You will need to fill in all layer information if you wishes to use the location master. Please fill in
the middle and small location data as well.
7/13
