SmartSafe iSmartE VP01 User manual

iSmartEV P01 User Manual
www.newsmartsafe.com
I
Copyright Information
Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD.
All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or
otherwise, without the prior written permission of SMARTSAFE.
Neither SMARTSAFE nor its affiliates shall be liable to the
purchaser of this unit or third parties for damages, losses, costs,
or expenses incurred by purchaser or third parties as a result of:
Accident, misuse, or abuse of this unit, or unauthorized
modifications, repairs, or alterations to this unit, or failure to
strictly comply with SMARTSAFE operating and maintenance
instructions. SMARTSAFE shall not be liable for any damages or
problems arising from the use of any options or any consumable
products other than those designated as Original SMARTSAFE
Products or SMARTSAFE Approved Products by SMARTSAFE.
All information, specifications and illustrations in this manual are
based on the latest information available at the time of printing.
SMARTSAFE reserves the right to make changes at any time
without prior written or oral notice.
Trademark Information
SMARTSAFE is a registered trademark of SHENZHEN
SMARTSAFE TECH CO.,LTD. in China and other countries. All
other SMARTSAFE trademarks, service marks, domain names,
logos, and company names referred to in this manual are either
trademarks, registered trademarks, service marks, domain names,
logos, company names of SMARTSAFE or are otherwise the
property of SMARTSAFE or its affiliates. In countries where any

iSmartEV P01 User Manual
www.newsmartsafe.com
II
of the SMARTSAFE trademarks, service marks, domain names,
logos and company names are not registered, SMARTSAFE
claims other rights associated with unregistered trademarks,
service marks, domain names, logos, and company names. Other
products or company names referred to in this manual may be
trademarks of their respective owners. You may not use any
trademark, service mark, domain name, logo, or company name
of SMARTSAFE or any third party without permission from the
owner of the applicable trademark, service mark, domain name,
logo, or company name. You may contact SMARTSAFE by
visiting the website at www.newsmartsafe.com, or writing to
SHENZHEN SMARTSAFE TECH CO.,LTD., 3310, Building 11,
Tianan Cloud Park, Bantian Street, Longgang District, Shenzhen,
Guangdong, China, to request written permission to use Materials
on this manual for purposes or for all other questions relating to
this manual.
To avoid personal injury, property damage, or accidental damage
to the product, please read all the information in this chapter
before using the product.
Operation Specification For New Energy Vehicle Safety
Maintenance
1. Identification of high voltage components: The orange wiring
harnesses of the vehicle are all high voltage wires.
2. High voltage parts: power battery pack, high voltage
distribution box, on-board charger, driving motor controller and
DC-DC assembly, electric power assembly, integrated
compressor, PTC heater, maintenance switch.
3. When repairing the high voltage system, the power supply of

iSmartEV P01 User Manual
www.newsmartsafe.com
III
the vehicle must be OFF (and the vehicle is in the non-charging
state), and remove the maintenance switch; After the emergency
maintenance switch is removed, it shall be kept by full-time
guardianship personnel, and ensure that no one will plug it in
during the maintenance process.
Notice: When the high voltage distribution box needs to be
repaired or replaced, remove the positive and negative high
voltage connectors connected to the battery pack carefully, and
wrap the exposed wires with electrical tape to avoid electric shock.
4. Five minutes after turning off the emergency maintenance
switch, use a multimeter to measure the high voltage circuit and
ensure that there is no power before checking and repairing the
high voltage system.
4.1 Measure the voltage between the positive electrode of the
battery pack and the body to preliminarily determine whether there
is electric leakage. If the voltage is greater than or equal to 50V, it
indicates that there is a leakage in the battery pack. Stop the
operation immediately.
4.2 When using a multimeter to measure high voltage, select the
correct measurement range. The accuracy level of the multimeter
should not be lower than 0.5, and the measurement range should
not be less than or equal to 600V. Please follow "One-hand
Operation" principle;
4.3 One pen line of the multimeter is equipped with an insulated
alligator clip (the voltage is required to be 3KV; the overcurrent
capacity is greater than 5A). During measuring, clamp the clip to a
terminal of the circuit first, and then connect the other pen to the
terminal to measure the reading. Only hold the pen with one hand
during each measurement; do not touch the metal part of the pen

iSmartEV P01 User Manual
www.newsmartsafe.com
IV
during measurement.
5. The maintenance switch shall not be assembled during low-
voltage debugging. In high-voltage debugging, the full-time
guardian shall instruct the assembly and maintenance switch.
6. High voltage debugging must be carried out under the premise
of good low voltage debugging, so as to determine whether the
battery has leakage. If there is leakage, it should be checked in
time, and high voltage debugging cannot be carried out.
7. During disassembling and installing the power battery pack
assembly; wrap the high-voltage wiring harness connector
connected to the high-voltage distribution box with insulation tape.
Do not damage the wiring harness during disassembly and
installation to avoid electric shock.
8. During repairing or replacing parts that pass through the sheet
metal holes of the body, such as high-pressure wiring harnesses
and tubing, pay attention to check whether the protection with the
sheet metal of the body is normal to avoid the wear of the wiring
harnesses and tubing.
NOTES
1. Maintain a safe environment for vehicle testing at all times.
2. Do not operate the detection equipment while driving the
vehicle to avoid distraction and causing an accident.
3. Before starting the engine, you should pull the handbrake,
especially the front wheel, and put the shift lever in neutral
(manual transmission) or [P] gear (automatic transmission) so as
not to start the engine and make the vehicle injure people.
4. The exhaust gas from the engine contains a variety of toxic
compounds (such as hydrocarbons, carbon monoxide, nitrogen

iSmartEV P01 User Manual
www.newsmartsafe.com
V
oxides, etc.), which will lead to slow response and even serious
personal injury or death. The vehicle under test should be parked
in a well-ventilated place during operation.
5. Take extreme care when working around ignition coils,
distributor caps, ignition lines and plugs. These components
generate dangerous voltages when the engine is running.
6. To avoid damaging the testing equipment or generating
incorrect data, please ensure that the vehicle battery is fully
charged and that the connection of the vehicle diagnostic seat is
clean and safe.
7. The vehicle battery liquid contains sulfuric acid, sulfuric acid is
corrosive to the skin, so you should avoid direct contact between
the battery liquid and the skin during the operation, especially do
not splash it into the eyes, and do not put it close to the fire.
8. Keep clothing, hair, hands, tools, testers, etc. away from
running or hot engine parts.
9. Please use the charger that comes with it. The Company will
not be responsible for any damage or loss caused by the use of
other chargers not designated by the Company.
10. Keep the testing equipment dry and clean, away from
gasoline, water and grease. When necessary, clean the surface
of the equipment with a clean cloth coated with a mild detergent.
11. All internal repairs to test equipment must be performed by
authorized maintenance organizations or authorized technicians.
Attempting to disassemble or modify the device will void the
warranty.

iSmartEV P01 User Manual
www.newsmartsafe.com
VI
This manual uses the following conventions.
PROMPT
Prompt information provides helpful information such as
additional operation instructions, tips, and suggestions. Example:
Prompt: The VIN code is usually located on the driver's side,
in the lower right corner of the front windshield. The exact location
varies from car to car. A VIN code is generally composed of 17
standard characters. The VIN code characters can contain the
uppercase letters A to Z and the numbers 1 to 0, but the letters I,
O, and Q are not usually used to avoid mispronunciation.
WARNING
It indicates an imminent hazard that, if unavoidable, will result in
death or serious injury to the operator or bystander. Example:
Warning: Reading a fault code during troubleshooting a
vehicle is only a small step in the diagnostic process. The vehicle
fault code is only used as a reference, and parts cannot be
replaced directly on the basis of the given fault code definition.
Each fault code has a set of test procedures, and the service
technician must strictly follow the operating instructions and
procedures described in the vehicle service manual to confirm the
root of the fault.
DANGER
It indicates an imminent hazard that, if unavoidable, will result in
death or serious injury to the operator or bystander. Example:
Danger: You must drive the vehicle in order to perform
troubleshooting. Please find someone else to help you. It is
dangerous to drive and operate diagnostic equipment at the same
time, which can cause severe traffic accidents.

iSmartEV P01 User Manual
www.newsmartsafe.com
VII
Table of Contents
1. Packing List .............................................................................................. 1
2. Product Introduction ................................................................................5
2.1 Overview ................................................................................................ 5
2.2 iSmartEV P01 ........................................................................................ 5
2.3 iSmartEV BOX ....................................................................................... 8
2.4 Technical Parameters ............................................................................ 8
3. Initial Use ................................................................................................ 11
3.1 Charge the Tablet ................................................................................ 11
3.2 Turn On/Off .......................................................................................... 11
3.3 Network Connection .............................................................................12
3.4 Registration and Update ...................................................................... 12
4. Getting Started ....................................................................................... 17
4.1 Main Interface and Bottom Navigation Bar .......................................... 17
4.2 Communication Settings ...................................................................... 19
5. Battery Diagnose .................................................................................... 21
6. Diagnose ................................................................................................. 27
6.1 Preparation .......................................................................................... 27
6.2 Vehicle Connection .............................................................................. 27
6.3 AutoDetect ........................................................................................... 28
6.4 Manual Selection ................................................................................. 29
7. ADAS Calibration ................................................................................... 43
7.1 Activate ADAS Calibration Function .................................................... 43
7.2 Start calibration .................................................................................... 44
8. Special Functions ...................................................................................48
8.1 A/F Reset ............................................................................................. 48
8.2 Electronic Parking Brake Reset ........................................................... 48
8.3 Oil Reset Service ................................................................................. 48
8.4 Steering Angle Calibration ................................................................... 49
8.5 Battery Maintenance System Reset .....................................................49

iSmartEV P01 User Manual
www.newsmartsafe.com
VIII
8.6 ABS Bleeding .......................................................................................49
8.7 Throttle Learning ..................................................................................49
8.8 Tire Pressure Monitor System Reset ................................................... 50
8.9 Diesel Particulate Filter (DPF) Regeneration .......................................51
8.10 Gearbox Matching ..............................................................................51
8.11 Gear Learning .................................................................................... 51
8.12 Motor Angle Calibration ..................................................................... 52
8.13 Coolant Bleed .................................................................................... 52
8.14 Engine Power Balance Monitoring .....................................................52
8.15 IMMO Prog .........................................................................................52
8.16 IMMO Service .................................................................................... 52
8.17 High Voltage Battery Diagnosis ......................................................... 52
8.18 Gas Particulate Filter Regeneration ...................................................53
8.19 Transport Mode ..................................................................................53
8.20 Tire Reset .......................................................................................... 53
8.21 Windows Calibration .......................................................................... 53
8.22 AdBlue Reset ..................................................................................... 53
8.23 NOx Sensor Reset ............................................................................. 53
8.24 Injector Coding ...................................................................................54
8.25 Stop/Start Reset .................................................................................54
8.26 Sunroof Initialization ...........................................................................54
8.27 Suspension Calibration ......................................................................54
8.28 Language Change ............................................................................. 54
8.29 Intelligent Cruise Control System Diagnosis ......................................54
8.30 AC System Relearn/Initialization ........................................................55
8.31 Seats Calibration ................................................................................55
8.32 AFS (Adaptive Front-lighting System) Reset ..................................... 55
8.33 Compressor Test ............................................................................... 55
8.34 Coolant Change .................................................................................55
8.35 EGR Learning .................................................................................... 55

iSmartEV P01 User Manual
www.newsmartsafe.com
IX
9. IMMO Matching .......................................................................................56
9.1 Vehicle connection ...............................................................................56
9.2 Operations ........................................................................................... 56
10. Update ................................................................................................... 61
10.1 Update ............................................................................................... 61
10.2 Renew Subscription ...........................................................................62
11. Videoscope ........................................................................................... 63
12. Current Clamp ...................................................................................... 63
13. Remote Diagnose ................................................................................. 63
13.1 Messages ...........................................................................................64
13.2 Contacts .............................................................................................64
13.3 Remote .............................................................................................. 65
14. Feedback ............................................................................................... 66
15. Personal center .................................................................................... 68
15.1 VCI ..................................................................................................... 68
15.2 Connector activation .......................................................................... 68
15.3 Firmware Fix ...................................................................................... 68
15.4 Profile .................................................................................................69
15.5 Subscription Renewal Card ............................................................... 69
15.6 Units ...................................................................................................70
15.7 Diagnostic Software Clear ................................................................. 70
15.8 About ..................................................................................................71
15.9 Login/Logout ...................................................................................... 71
16. Other... ................................................................................................... 72
16.1 Reports .............................................................................................. 72
16.2 Setting ................................................................................................74
16.3 File Management ............................................................................... 78
16.4 TeamViewer .......................................................................................78
16.5 Browser ..............................................................................................79
16.6 System OTA Upgrade ........................................................................79

iSmartEV P01 User Manual
www.newsmartsafe.com
X
16.7 Gallery ................................................................................................80
16.8 Recording Master ...............................................................................80
16.9 Video Player .......................................................................................80
16.10 E-mail ...............................................................................................80
16.11 Camera ............................................................................................ 80
17. Frequently Asked Questions ...............................................................81
FCC Warnning ............................................................................................ 83
Warranty.. ....................................................................................................85

iSmartEV P01 User Manual
www.newsmartsafe.com
1
1. Packing List
The following accessories are for reference only. Please consult
from the local agency or check the package list supplied with this
tool together.
Main Unit and Accessories
No.
Name
Q'TY
Reference Picture
1
iSmartEV P01
1
2
iSmartEV BOX
1
3
OBD II
Extension Cable
1
4
Power Adaptor
（5V 3A）
1

iSmartEV P01 User Manual
www.newsmartsafe.com
2
5
USB Cable
（Type-C）
1
6
USB Cable
（Type-B）
1
7
Switching
Power Supply
（12V 5A）
1
8
OBD I
Transfer Cable
1
9
Cigarette Lighter
1
10
Light Fuse
2

iSmartEV P01 User Manual
www.newsmartsafe.com
3
11
Non-16pin Adaptor
Cable Kit
1
-
12
Password Envelop
1
-
13
Quick Reference
Guide
1
-
14
User Manual
1
-
15
Packing List
1
-
Battery Jumper Adapters
No.
Name
Q'TY
Reference Picture
1
Jumper Cable
(Jump-8)
1
2
Matching Adapter 1
4
3
Matching Adapter 2
4
4
Matching Adapter 3
4
5
Matching Adapter 4
4
6
Matching Adapter 5
4

iSmartEV P01 User Manual
www.newsmartsafe.com
4
7
Matching Adapter 6
4
8
Matching Adapter 7
4
9
Matching Adapter 8
4
10
Matching Adapter 9
4

iSmartEV P01 User Manual
www.newsmartsafe.com
5
2. Product Introduction
2.1 Overview
iSmartEV P01 new energy vehicle detection tool is a professional
comprehensive testing equipment for new energy vehicles
developed by SmartSafe Company. The equipment supports new
energy vehicle testing and vehicle battery pack testing functions.
•Support deep system detection of battery packs of various
brands, and support reading of parameters such as the current
SOC/SOH, monomer/module voltage, input/output current and
power, and battery temperature etc. for battery packs.
•Automatically calculate the total voltage, voltage difference,
maximum/minimum voltage and other indicators, and
automatically label abnormal data.
•Support new energy vehicle whole vehicle detection, support
the reading/cleaning of battery pack fault code, special function,
actuation test and other detection functions.

iSmartEV P01 User Manual
www.newsmartsafe.com
6
2.2 iSmartEV P01
No.
Name and Description
1
10.1-inch Touch Screen
2
Front Facing Camera

iSmartEV P01 User Manual
www.newsmartsafe.com
7
3
Power Indicator Light
Red during charging and green after fully charged.
4
Handle
5
Volume -
6
Volume+
7
Power Button/Screen Lock Button
• Press the button for about 3 seconds to start the
machine when the power is off.
• Press this key to wake up/close the screen when
the power is on.
• Press the button for more than 3 seconds to
select shutdown or restart when the power is on;
• Press the button for about 8 seconds to force the
shutdown.
8
Microphone
9
USB Type-C
• Used for connecting to power adapter for
charging or connecting to computer for data
transmission.
10
USB Type-A
• Used for connecting to USB devices or function
expansion modules.
11
Flash Light
12
Rear Camera
13
Holder
14
Loudspeaker

iSmartEV P01 User Manual
www.newsmartsafe.com
8
2.3 iSmartEV BOX
The device is a Vehicle Communication Interface (VCI) device,
which is used to connect the vehicle diagnosis seat or battery
pack low-voltage signal communication interface for data
collection, and then send the data to the host for analysis.
No.
Name and Description
1
USB Type-B
2
DC 12V Power Supply Jack
3
Wi-Fi Indicator
4
USB Indicator
5
Bluetooth Indicator
6
Vehicle Communication Indicator
7
Power Supply Indicator
8
OBD-II Port

iSmartEV P01 User Manual
www.newsmartsafe.com
9
2.4 Technical Parameters
2.4.1 iSmartEV P01
Item
Specification Parameters
Operation System
Android 11
CPU
8-core Processor, 2.0GHz
Internal Storage
4GB
Storage
128GB
Display Screen
10.1 inch Touch Screen ，1920x1200
Resolution
Front Facing
Camera
8 Million Pixels
Rear Camera
13 Million Pixels
Wi-Fi
2.4GHz/5GHz Wi-Fi
Communication
Wi-Fi, Bluetooth, USB
Battery
3.8V/9360mAH
Working
Temperature
0℃~45℃
Storage
Temperature
-20℃~70℃
2.4.2 iSmartEV BOX
Item
Specification Parameters
CPU
Cortex A7 + Cortex-M7
System
Linux
Internal Storage
256M
Storage
8GB

iSmartEV P01 User Manual
www.newsmartsafe.com
10
Port
Type B、ODBII-16、DC-IN
Communication
Wi-Fi, Bluetooth, USB
Working Voltage
DC 9~36V
Working
temperature
0℃~50℃
Storage
temperature
-20℃~70℃