SMC Networks JI5-RT359333DB24 User manual

JI5-RT359333DB24
User Manual
802.11 b/g/n Wireless Mini PCIE

ii
SMCD3GNV5 Administrator Manual
SMC Networks
20 Mason
Irvine, CA 92618
U.S.A.
Copyright © 2013 SMC Networks
All Rights Reserved
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no
responsibility is assumed by SMC for its use, or for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights
of SMC. SMC reserves the right to change specifications at any time without notice
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose
without the express written permission of SMC.
Microsoft and Windows are registered trademarks of Microsoft Corporation. Apple and Macintosh are registered
trademarks of Apple, Inc. All other brands, product names, trademarks, or service marks are property of their
respective owners.

iii
SMCD3GNV5 Administrator Manual
Compliance
Federal
Communication Commission
Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in
a residential installation. This equipment generates uses and can
radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio
or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for
compliance could void the user's authority to operate
this equipment .

iv
SMCD3GNV5 Administrator Manual
IMPORTANT
NOTE :
FCC
Radiation Exposure S t ateme n t:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and
operated with minimum distance 20cm between the radiator &
your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
IEEE 802.11b/g/n operation of this product in the U.S.A.
is firmware-limited to channels 1 through 11.
This device is
intended only for OEM integrators under the following condition s:
•The antenna must be installed such that 20 cm is maintained between
the antenna and users, and
•The transmitter module may not be co-located with any other transmitter
or antenna.
As long as the above two conditions are met, further transmitter test will not
be required. However,
the OEM integrator is still responsible for testing
their end-product for any additional compliance
requirements required with
this module installed (for example, digital device emissions, PC peripheral
requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another
transmitter), then the FCC authorization is no longer
considered valid and the FCC ID
can not be used on the final product. In these circumstances, the
OEM
integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC
authorization.
注意 !
依據
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用 者均不得擅自
變更頻率、加大功率或變更原設計之特性及功能。

v
SMCD3GNV5 Administrator Manual
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現 有干擾現象
時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線
電信。低 功 率 射 頻 電 機
須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾。
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed
such that 20 cm may be maintained between the antenna
and users. The final end product must be
labeled in a visible area with the
following: “Contains TX FCC ID: JI5-359333DB24 ”.
Manual Information That Must be Included
This module must be properly installed in an approved device to function properly.Installation should
be performed only at the factory or by a qualified service technician.The module should be inserted
into the mini-PCIE connector. Once installed into the mini-PCIE card slot, carefully attach the Wi-Fi
antennas to the connectors on the card.
The OEM integrator has to be aware not to provide information to the end
user regarding how to
install or remove this RF module in the user manual of
the end product which integrates this module.
The user manual for OEM integrators must include the following information
in a prominent location
“IMPORTANT NOTE: To comply with FCC RF
exposure compliance requirements, the antenna
used for this transmitter must
be installed to provide a separation distance of at least 20 cm from all
persons
and must not be co-located or operating in conjunction with any other antenna or transmitter.
For all the model ship to USA market, OEM integrator shall limit the accessible
channel to US
channel 1 -11 only during the manufacturing process by special firmware
setting which is not
available to the end
user.

vi
SMCD3GNV5 Administrator Manual
Contents
Compliance ............................................................................................................. iii
Contents.................................................................................................................. vi
About this Manual.................................................................................................... 7
1 Introduction........................................................................................................... 8
Features........................................................................................................................8
What is Wireless LAN................................................................................................... 9
Wireless LAN Modes .................................................................................................. 10
Notes on Wireless LAN
Configuration .................................................................. 11

7
SMCD3GNV5 Administrator Manual
About this Manual
This User’s Manual describes how to install and operate your 802.11b/g/n Wireless
LAN Module. Please read this manual before you install the
product. This manual includes the
following
topics:
Product description and
features.

8
SMCD3GNV5 Administrator Manual
1 Introduction
The JI5-RT359333DB24, which is based on the RT35933 solution, is a dual-band mode
802.11b/g/n wireless LAN embedded Mini-PCI module for Wireless Cable Gateway Router.
JI5-RT359333DB24 will be a RF module of AP board. Additionally, provide new feature to
existing Wireless Cable Gateway Router products.
Features
Embedded to any AP with Mini-PCI type -B slot.
• IEEE 802.11 b/g/n compatible.
• Backward compatible with IEEE 802.11b standard.
• Wire-free access to networked resources from anywhere beyond the desktop.
• Delivers data rate up to 450 Mbps.
• 801.11b/g/n: Dynamically shifts between 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
network speed, based on signal strength, for maximum availability and reliability
of connection.
• 802.11b: Dynamically shifts between 11M, 5.5M, 2M, and 1 Mbps network speed,
based on signal strength, for maximum availability and reliability of connection.
• Uses 2.4GHz frequency band, which complies with worldwide requirement
• Ensures great security by providing the 64/128/256 Wired Equivalent Privacy (WEP)
and WPA/PWA2.
• 802.11i standards support.
• WMM support.

9
SMCD3GNV5 Administrator Manual
What is Wireless LAN
Wireless Local Area Network (WLAN) systems offer a great number of advantages
over traditional wired systems. WLAN is flexible and easy to setup and manage. They
are also more economical than wired LAN systems.
Using radio frequency (RF) technology, WLAN transmit and receive data through the air.
WLAN combine data connectivity with user mobility. For example, users can roam from
a conference room to their office without being disconnected from the LAN.
Using WLAN, users can conveniently access-shared information, and network
administrators can configure and augment networks without installing or moving
network cables.
WLAN technology provides users with many convenient and cost saving features:
• Mobility: WLAN provide LAN users with access to real-time information anywhere in
their organization, providing service opportunities that are impossible with wired
networks.
•Ease of Installation: Installing is easy for novice and expert users alike, eliminating the
need to install network cables in walls and ceilings.
• Scalability: WLAN can be configured in a variety of topologies to adapt to specific
applications and installations. Configurations are easily changed and range from
peer-to-peer networks suitable for a small number of users to full infrastructure networks
of thousands of users roaming over a broad area.

10
SMCD3GNV5 Administrator Manual
Wireless LAN Modes
Wireless LANs can be configured in one of two ways:
1. Ad-hoc Networking
Also known as a peer-to-peer network, an ad-hoc network is one that allows all workstations
and computers in the network to act as servers to all other users on the network. Users on the
network can share files, print to a shared printer, and access the Internet with a shared modem.
However, with ad-hoc networking, users can only communicate with other wireless LAN
computers that are in the wireless LAN workgroup, and are within range.
2. Infrasture Networking
Infrastructure networking differs from ad-hoc networking in that it includes an access point.
Unlike the ad-hoc structure where users on the LAN contend the shared bandwidth, on an
infrastructure network the access point can manage the bandwidth to maximize bandwidth
utilization.
Additionally, the access point enables users on a wireless LAN to access an existing wired
network, allowing wireless users to take advantage of the wired networks resources, such as
Internet, email, file transfer, and printer sharing.
Infrastructure networking has the following advantages over ad-hoc networking:
•Extended range: each wireless LAN computer within the range of the access point can
communicate with other wireless LAN computers within range of the access point.
• Roaming: the access point enables a wireless LAN computer to move through a building
and
still be connected to the LAN.
•Wired to
wireless LAN connectivity: the access point bridges the gap between wireless
LANs
and their wired counterparts.

11
SMCD3GNV5 Administrator Manual
Notes on Wireless LAN Configuration
When configuring a wireless LAN (WLAN), be sure to note the following points:
•Optimize the performance of the WLAN by ensuring that the distance between
access points is not too far. In most buildings, WLAN Adapters operate within a
range of 100 ~ 300 feet, depending on the thickness and structure of the walls.
•Radio waves can pass through walls and glass but not metal. If there is
interference in transmitting through a wall, it may be that the wall has reinforcing
metal in its structure. Install another access point to circumvent this problem.
•Floors usually have metal girders and metal reinforcing struts that
interfere with
WLAN transmission.

12
SMCD3GNV5 Administrator Manual
20 Mason
Irvine, CA. 92618
U.S.A.
http://na.smc.com
Document number: JI5-RT359333DB24