
Myco Adjustable Bathboard
User Instructions
Code: MBAX
Adjustable Bathboard Overview
• The Adjustable Bathboard can be adjusted to suit baths from 26” (660mm) to 30” (760mm) wide.
• At least 1½” (38mm) of each end of the Bathboard must rest securely on the sides of the bath.
• The Adjustable Bathboard should be cleaned regularly with a household anti-bacterial cleaner.
Maximum user weight 30 stone (190kg)
The two Securing Brackets require assembly. Simply take the two pieces and press them together firmly until
they clip together. The Brackets then attach to the underside of the Bathboard with the two white wing-bolts.
Position the brackets so that they are at their narrowest position.
Assembling the Securing Brackets
If you know the width of the bath, you may gently pull
the ends of the Bathboard apart until the scale indicates
the required width. Alternatively, you may position the
Bathboard over the bath and extend the board until it is
the same width as the bath. Push the bolts through
board to fix the width, being mindful of the
square-shaped locator under the bolt head, and the
receiving hole. If using the handle, this replaces the
bolts. Secure the bolts (or handle) with the two white
plastic wing-nuts.
The bolts or handle must always be next to the wall.
Adjusting the Bathboard to fit the width
of the bath
www.smitcare.co.uk
ZMBAX Rev 1
WEIGHT LIMIT
190 KG
30 STONE
27
28