SnapStream Encoder QAM/ATSC User manual

SnapStream Encoder (QAM/ATSC)
1
2
DVI
VGA OUT
USB
HDMI
MOUSE
KEYBOARD
USB
USB
NETWORK LINE IN
LINE OUT
MIC IN
POWER
In-house QAM
Over-the-air antenna
A
B
A
B
Connect coax cable to your over-the-air antenna or in-house QAM feed.
Connect coax cable to the SnapStream Encoder (QAM/ATSC). See diagram.
AConnect the SnapStream Encoder (QAM/ATSC) to your organization’s network switch via ethernet cable.
BConnect the SnapStream Encoder (QAM/ATSC) to power and turn it on.
Quick Start: SnapStream Encoder (QAM/ATSC)
QAM Encoder
DVI
VGAOUT
USB
HDMI
MOUSE
KEYBOARD
USB
USB
NETWORK LINE IN
LINEOUT
MICIN
HDMI AV IN HDMI AV IN HDMI AV IN HDMI AV IN
POWER
Ethernet cable
SnapStream Encoder (QAM/ATSC)
Network Switch
B
A
SnapStream Encoder (QAM ATSC) Front
On/Off
OR
Combiner
dual tuner dual tuner
Splitter
TV Feed

4Open a Web browser and connect to
SnapStream by name or IP address.
Log in to start using SnapStream.
Username: administrator
Password: snapstream
Search TVRecord TV
Clip TVWatch TV
TV to Twitter
& Facebook
Set-up SnapStream Cloud Set-up SnapStream Enterprise/Pro
3
ATo set-up SnapStream Cloud, contact Support
AConnect SnapStream to power and to your network.
CTurn SnapStream on.
Connect a keyboard, a monitor, and a mouse to
SnapStream for initial testing.
OR
Phone: [phone]
Email: [email protected]
(not included)
Network Switch
B