Snom 360 Quick start guide

© 2005 snom technology AG
All rights reserved.
Important Notes v1.00
snom 360
snom technology AG
Charlottenstr. 68-71
10117 Berlin
tel/enum: [phone]
fax: [phone]
sip: [email protected]
mail: [email protected]
www.snom.com
With the snom 360 Expan-
sion Module you are able to manage
up to 42 function keys, which can be
used for Line, Destination, Intercom,
Park Orbit, or Voice Recorder mapping.
Using your snom 360 VoIP
phone with a snom Headset you are
able to optimize productivity. The
snom Headset provides users with
more exibility, freedom and comfort.

The current product documentation and FAQs can be obtained from our web site:
http://www.snom.com
If you face problems installing your snom 360 VoIP phone, inform our support:
[email protected]
Dear customer:
Congratulations on the purchase of your snom 360 Voice over IP telephone!
Please read these notes carefully before you start using the snom 360.
Documentation
• To clean the snom 360 use anti-static cloth.
Do not use liquid cleaners.
• Place this unit only on even, horizontal surfaces.
• Do not expose to humid environments.
• Do not locate power and network cable where a
person might step on or trip over them.
• Do not disassemble this unit.
Opening this unit will void the product warranty.
Safety Notes
• Power Supply:
- An external power supply (5 V)
- Use only the power supply supplied with your phone !!!!!!!!!!!!
Copyright © 2000-2005 snom technology AG. All rights reserved. snom®is a registered trademark of snom
technology AG and afliates in Germany, U.S.A. and certain other countries. Other trademarks or registered
trademarks mentioned in this document are the property of their respective manufacturers or owners.
• Please inform yourself on our webpage (http://www.snom.com) at
„Support / Firmware download“ whether a new rmware version is
available and perform an update, as described in our FAQs subchapter
„Firmware“. By pressing the key you will nd out which
Firmware is currently installed on your phone.
www.snom.com