SNR SNR-VG-1000-8S User manual

Thanks for Choosing SNR-VG-1000-8S VoIP Gateway!
Please read this installation guide carefully before install the gateway. If you need any technical
support, please contact us.
Tel: [phone]
Mail: [e-mail]
Website: support.nag.ru
SNR-VG-1000-8 Appearan e
Number of Ports
Des ription of Indi ators
1
2
3

户 户 户客 至上心 服
户 户 户十年 注就 品
1. Please separate power cables with telephone lines so as to reduce the interference with telephone
calls.
2. The adapter of SNR-VG-1000-8S accepts DC input voltage of 12V. Please ensure stable and safe
power supply.
3. To guarantee stabilized running of SNR-VG-1000-8S, please ensure there is enough network
bandwidth.
4. To ensure the gateway can work normally, you’d better install the gateway in a device room
where temperature and humidity are appropriate.
5. You’d better place the gateway on a flat surface or a device cabinet. To effectively maximize
heat dissipation, do not pile up the gateway with other devices.
Installation Attentions
Conne tion Instru tion
Network Connection
Telephone Connection
Power Connection
4
5

Modify PC’s IP Address
Modify the IP address of PC to make it at the same network segment with the SNR-VG-1000-8S
gateway, since the default IP address of the gateway is 192.168.11.1.
(1) On the PC, click “Network  Properties”.(2) Double-click “Internet Protocol (TCP/IPv4 ”.
(3 Select “Use following IP address”, and then enter an available IP address which is at the same
network segment with “192.168.11.1”.
6

户 户 户十年 注就 品
Configure SIP Server Information
Log into SNR-VG-1000-8S, and then click SIP Server in the navigation tree and then enter the
address of the SIP server which is to be registered. Click Save in the last.
Click Port in the navigation tree on the left, and then click Add. Input the SIP account and
authentication password assigned by the SIP server.
Click Save and then restart the SNR-VG-1000-8S gateway for the new configurations to take effect.
If you want to modify the IP address of SNR-VG-1000-8S, please click “Network  Local
Network” in the navigation tree on the left, and then input new IP address and DNS server address
on the displayed interface.
Modify IP Address of SNR-VG-1000-8S
Open a web browser and enter the IP address of SNR-VG-1000-8S (the default IP is 192.168.11.1 .
Then the login GUI will be displayed. Both the default username and password are admin.
Log into SNR-VG-1000-8S
7
8
9

Website ：http://support.nag.ru
Basi Operations
•Dial *158# to query the IP address of LAN port of SNR-VG-1000-8S;
•Dial *159# to query the IP address of WAN port of SNR-VG-1000-8S;
•Dial *114# to query the telephone number of a FXS port;
•Dial *165*000000# to restore default IP address, username and password;
•Restore factory default settings: （1）dial *166*000000#; （2）Press the RST button for 7
seconds; （3）Log into the gateway and then click “Tools  Fa tory Reset”. Then click
Apply, and restart the gateway.
•Dial *111# to restart SNR-VG-1000-8S.
This document only provides instructions for quick installation and basic configuration. For
detailed explanation of functions and parameters, please make reference to SNR-VG-1000-8S
VoIP Gateway User Manual, or ask for online technical support.
Detailed Configuration & Parameter Explanation
10
11