Huawei B970b User manual

Huawei B970b Wireless Gateway Quick Setup Guide
http://www.manuallib.com/file/2593485
From ManualLib.com
ManualLib.com collects and classifies the global product
instrunction manuals to help users access anytime and
anywhere, helping users make better use of products.
Home: http://www.manuallib.com/ Chinese: http://www.shuomingshuku.com/
This Manual: http://www.manuallib.com/file/2593485

Huawei B970b Wireless Gateway
Quick Setup Guide
This Manual: http://www.manuallib.com/file/2593485

Table of Contents
Components
Power Supply
Ethernet Cable
Pedestal (stand)
Wireless Router
Connection and Setup of Components
Inserting the SIM
Connecting the power
Connecting the Antenna
Connecting the Ethernet Cable
Gateway GUI
Accessing the default gateway
Configurations
Configuration Wizard
Configuring The Dial-Up settings
Configuring WLAN settings
This Manual: http://www.manuallib.com/file/2593485

Components
Power supply
Ethernet Cable
Antenna
This Manual: http://www.manuallib.com/file/2593485

Connection and Setup of Components
•Inserting the SIM
•Connecting the power
•Ethernet Cable (connection on router)
This Manual: http://www.manuallib.com/file/2593485

•Ethernet Cable (connection on router)
This Manual: http://www.manuallib.com/file/2593485

Gateway GUI
•Accessing the default gateway
Insert an Ethernet cable in the first port on the router and insert the other end into the Ethernet port on the
computer.
ON the keyboard, hold down the Windows key and “R” simultaneously. The Run.exe window should then display;
Type in http://198.168.1.1
The default browser will be launch and a screen with the Gateway GUI will appear, as seen below. This will prompt
for a password, insert admin and click on Login.
This Manual: http://www.manuallib.com/file/2593485

Configurations
•Configuration Wizard
Once logged-in, the Quick setup wizard will be displayed (see image below), Select Next.
This Manual: http://www.manuallib.com/file/2593485

You will now be prompted to enter in the ISP connection profile;
Here are the required settings that will be needed for MTC Connect (Contract) and MTC Tango (Pre-Paid);
Profile Name
Netman Connect
Netman Prepaid
Dial-up Number
*99#
*99#
PPP User Name
ppsuser
PPP Password
ppsuser
Static APN
internet
ppsinternet
Ensure that the APN is on Static and that the IP Address is on Dynamic then select Next.
Select On Demand for the PPP Connection and CHAP+PAP for the PPP Authentication and select Next.
This Manual: http://www.manuallib.com/file/2593485

You may now rename the SSID (the name displayed when the WiFi is broadcasted) and select whether to have it
visible by broadcast or not.
In the example below the SSID is named “gateway” and will be broadcasted.
Click on Next.
Now select the WLAN Security you may want to use and select Next.
This Manual: http://www.manuallib.com/file/2593485

A summary of the setup and configuration will now be displayed;
If you are in agreement will the summary, select Finish.
The changes will be applied once you select Continue.
This Manual: http://www.manuallib.com/file/2593485

Test out the connection;
Start by clicking on the wireless icon positioned on the taskbar. From the list of wireless connections, select gateway
as indicated in the diagram. You will be prompted for the password you have setup in the configuration. Key in the
password and select connect.
This Manual: http://www.manuallib.com/file/2593485