SOAR SEIKI 998 TD1-R User manual

SOARSEIKI .Co.,Ltd [e-mail]

1

2

3

4

5
BAGS A1 FRONT AND REAR DIFF

5
BAGS A2 CENTER DIFF

BAGS B1 FRONT TRANSMISSION
6
STEP B1-1
STEP B1-2
GR160003
BE050110040
S998-B01
PL18010401
PI025260
SK050040
SE17070703
SE17070702
SE17072002 TD1R CENTER REAR 98mm CVD SET
SE160003 998 103mm Front Center Universal Swing Shaft Set
5*11*4mm
Push joint against gear to remove
gap ,Tighten set screw on to gear flat
spot
Apply a thiin layer of lubricant on the gear.
Threadlock
The use of Optional
Universals is suitable
for very bumpy
conditions.

The inserts are considered expendables, especially the front
inserts, which have to withstand the constant knocks thus they
will need to be changed more often.
7
BAGS B1 FRONT TRANSMISSION
SS030120
3*12mm
STEP B1-4
The gear meshing needs to be
checked regularly. Use
WS128160020 12.8*16*0.2mm
Washer to adjust accordingly.
Apply a thiin layer of lubricant on the gear.
SS030140
CB17051401
AL17101101
The inserts are considered expendables,
especially the front inserts, which have
to withstand the constant knocks thus
they will need to be changed more
often.
SG030350
STEP B1-3
3*35mm
3*14mm
S998-B01

BAGS B1 FRONT suspension
SE160014
WS042120100
SS030140
STEP B1-5
PL160001-H
S998-B12
PL160003
SB17051101
The inserts are considered expendables,
especially the front inserts, which have
to withstand the constant knocks thus
they will need to be changed more
often.
The tightness on the arms, depends on
individuals tightening the screws.
Please adjust tightness accordingly to
allow arms to move freely without
binding.
SK030050
SG025060
S998-B01
SH030160
SK030030
STEP B1-6
SP160001
-18
Ø 1.8mm
SP160001
-19
Ø 1.9mm
SP160001
-20
Ø 2.0mm
SP160001
-21
Ø 2.1mm
SP160001
-22
Ø 2.2mm
SP160001
-23
Ø 2.3mm
SP160001
-24
Ø 2.4mm
SP160001
-25
Ø 2.5mm
SP160001
-26
Ø 2.6mm
8
SK030120
S998-B16

9
SE17072001
AL17071201
AL17071201
CB17040505
SE160001 998 F/R Universal Swing Shaft Set
The use of Optional
Universals is suitable
for very bumpy
conditions.
BAGS B2 FRONT suspension
BE127195040

10
S998-B19
PL160018
PL160016
STEP B2-5
The tightness on the arms, depends on
individuals tightening the screws.
Please adjust tightness accordingly to
allow arms to move freely without
binding.
SS030120
3*12mm
BAGS B2 FRONT suspension
STEP B2-4

11
STEP B2-6
BAGS B2 FRONT suspension
SH040100
CB17032701
SH040100
WS051010
FRONT suspension

BAGS C1 REAR TRANSMISSION
12
STEP C1-1
STEP C1-2
GR160003
BE050110040
S998-B01
PL18010401
PI025260
SK050040
SE17070703
SE17091306
SE17091306 TD1R CENTER REAR 103mm CVD SET
SE160003 998 113mm Front Center Universal Swing Shaft Set
5*11*4mm
Push joint against gear to remove
gap ,Tighten set screw on to gear flat
spot
Apply a thiin layer of lubricant on the gear.
Threadlock
The use of Optional
Universals is suitable
for very bumpy
conditions.

STEP C1-5
STEP C1-4
STEP C1-3
BAGS C1 REAR TRANSMISSION
13
The gear meshing needs to be
checked regularly. Use
WS128160020 12.8*16*0.2mm
Washer to adjust accordingly.
Apply a thiin layer of lubricant on the gear.
S998-B01
SS030120
AL17101102
PL160003
SS030140
The inserts are considered expendables
PL160003
AL17092902
SS030140

14
STEP C2-1
STEP C2-2
BAGS C2 REAR suspension
The inserts are considered expendables
PL160003
AL17092901
SG030350
The tightness on the arms,
depends on individuals
tightening the screws.
Please adjust tightness
accordingly to allow arms to
move freely without binding.
WS042120100
PL160002-H
SE160014
SP160002
-22
Ø 2.2mm
SP160002
-23
Ø 2.3mm
SP160002
-24
Ø 2.4mm
SP160002
-25
Ø 2.5mm
SP160002
-26
Ø 2.6mm
SP160002
-27
Ø 2.7mm
SP160002
-28
Ø 2.8mm
SP160002
-29
Ø 2.9mm
SP160002
-30
Ø 3.0mm
S998-B01
SK030050
SG025060
SK030120
SH030160

15
STEP C2-3
STEP C2-4
STEP C2-5
BAGS C2 REAR suspension
PI030168
SK050050
S998-B23
BE127195040
SE17072004
SE160001 998 F/R Universal Swing Shaft Set
The use of Optional
Universals is suitable
for very bumpy
conditions.
BE080160050
SE160005
SN030
S998-C11
S998-C11
Each Individual's level of
tightening the screws is
different. Please tighten till
able to move freely.

16
STEP C2-6
STEP C2-7
BAGS C2 REAR suspension
SG030100
SH030220
SN030
S998-D05
SH030120

17
BAGS D WING STAY
STEP D-1
STEP D-2
BAGS D REAR CHASSIS BRACE
SH030140
SH030120
SN030
SN030
SH030200
SS030120
S998-D02
S998-D03

13
BAGS B2
BAGS B2
18
BAGS E STEERING
Different Ackerman holes, gives
your different steering response.
Adjust according to your driving
preference.
The tighter the servo saver,
the better the buggy will be
able to maintain its intended
direction, giving the buggy a
more direct feel. However, in
the event of high knocks. The
servo will absorb the force of
the knock; higher possibility
that the servo gears will be
damaged.
AL17081801