Sodex Sport S80002 User manual

1 1
DESCRIPTION
Steel structure
Anti-corrosion coating
Powder coated
CONFORM
ASSEMBLY INSTRUCTIONS
ELLIPTICAL TRAINER
PRODUCT REF :S80002 UNIT
ASSEMBLY TIME
The time to make the assembly of the fitness is estimated at 10 minutes at 2 persons.
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
WARRANTY
One full year parts and labor guarantee. Every claim regarding the condition of the delivered equipment has to be
done within the legal period,of the reception of the material.
The warranty will not apply to:
- All degradation during the transport.
- All degradation due to poor maintenance.
- All degradation due to use differing from which was intended
- Any defect claimed after the end of the legal period.
- Any damage due to a faulty installation or assembly of the module

2 2
ASSEMBLY
Concrete bloc 200
Screws BC M18x40

NOMENCLATURE
Package
No Ref Index Designation Description Quantity Packing method Weight (kg)
Dim.
(mm)
A1 S80002/
S81300 GElliptical Trainer 1
Plastic bubbles
+ cardboard 2
layers
56 1070x1423x50
2
A2 S81300 BAnchor kit of fitness 1
Plastic bubbles
+ cardboard 2
layers
7520x270x270
PACKING LIST
ELLIPTICAL TRAINER
PRODUCT REF S80002 Index G UNIT
PRE-ASSEMBLED ACCESSORIES
Package
No Ref Designation Description Qty Note
A1 OBI6006 Ball bearing 6006zz 4
A1 OBI2206 Ball bearing SKF2206E-
2RS 2
A1 OBI6904 Ball bearing 6904LLU 4
A1 OBI6207 Ball bearing 6207ZZ 2
A1 PT72T Retaining Ring D72 2
A1 PT62T Retaining Ring D62 2
A1 PT30N Retaining Ring D30 4
A1 BTBH1025+
LTBA102310
Screws BC M10x25+
Washers BC 10 4 + 4
A1 LTBA122615+
TTBD12
Locknuts BC M12+
Washers BC 12 4 + 4
A1 BITQ1030 SS Round Head Screws
M10x30 2
A1 BITR1015 SS Screw M10x15 4
A1 BITR1010 SS Screw M10x10 2
A1 TTN25 Handles D25 2
A1 Fiberglass cover
(2 half pieces) 1
A1 NNT10 Nut cover 8
VISA PACKING DEPARTMENT DATE :

4 4
NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg)
Dim.
(mm)
A1 S81300 BAnchor kit of fitness 1Cardboard 2
layers 7520x270x270
PRE-ASSEMBLED ACCESSORIES
Package
N° Ref Designation Description Qty Note
A1 BTBH1840+
LTBA183525
Screws BC M18x40+
Washers BC 18 4 + 4 Fix the post
VISA PACKING DEPARTMENT DATE :
PACKING LIST
ANCHOR KIT OF FITNESS
PRODUCT REF S81300 Index B UNIT