Softel FTTX-PT-M16 User manual

FTTX 16 CORE Terminal Box
Instruction Manual
1. Description:
The FTTX-PT-M16 is used as a termination point for the feeder cable to connect with drop
cable in FTTx communication network system. The fiber splicing, splitting, and distribution can
be done in this box, and meanwhile it provides solid protection and management for the FTTx
network building.
2. Features:
1. Total enclosed structure.
2. Material:PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up
to IP65.
3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in
one.
4. Cable, pigtails, and patch cords are running through their own paths without disturbing each
other, micro type PLC splitter installation, easy maintenance.
5. Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for
maintenance and installation.
6. Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor
and outdoor use.
3. Specification:
1). Environmental Requirement
-Working temperature: -40℃～+85℃
-Relative humidity: ≤85% (+30℃)
-Atmospheric pressure: 70KPa~106Kpa
2). Main Technical Datasheet
-Insertion loss: ≤0.15dB
-UPC return loss: ≥50dB
-APC return loss: ≥60dB
3). Thunder-proof Technical Datasheet
-The insulation resistance between the grounding device and the metal parts of the box is no
less than 2 104MΩ/500V (DC); IR≥2 104MΩ/500V.
-The voltage resistance between the grounding device, and the box and its metal parts is
no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V
4. Configuration Table:
Table 1- Model and configuration
Model
Size (Pic 1)
A*B*C (mm)
Max
Capacity
Installation Size
(Pic 2)
D*E*F(mm)
Into the largest
cable diameter
(mm)
Maximum size
of branch hole
(mm)
Waterproof SC/AP
C adapter
16 CORE
319.3*214*133
48
52*166*166
ᴓ8~14
ᴓ16
16
Pic 1 Box Size Pic 2 Installation Size

FTTX 16 CORE Terminal Box
Instruction Manual
1. Product Cable Ways:
1.1 Product cable ways:
1.2 Fast Plug
Fast installation, fastening, and sealing of straight-through optical cable with the Fast
Plug.

FTTX 16 CORE Terminal Box
Instruction Manual
1.3 Fiber optic cable bifurcation
1.4 Product cable ways:
Pic 3 Cable Ways
1.5 Splicing tray
Item
Splicing tray A
Splicing tray B
Dimensions(H x W x D; unit: mm)
134*104*8
134*104*4
Net weight (unit: kg)
0.021
0.015
Picture
Color
Customizable
Customizable
Material
PC+ABS
PC+ABS
Splicing capacity of a tray(cores)
12, 1 slot for 1/8 PLC
8
2. Installation:
1. Wall-mounted installation
Drill 3 holes into the wall based on the size in table 1, place the expansion bolt Φ7.5*40,
place the box to match up the holes and use bolt to fasten(Pic 4).
2. Pole-mounted installation

FTTX 16 CORE Terminal Box
Instruction Manual
Fix 1 set of the pole ring to the telecom pole (Pic 5).
3. The overhead structure
Tie the two installed on the chassis of the overhead hung on the wire, and then bolted,
prevent the case fall off.(Pic 6)
Pic 4 Wall mounted installation
Pic 5 Pole mounted installation
Pic 6 The overhead structure
3. Fiber connector installation:

FTTX 16 CORE Terminal Box
Instruction Manual
Pic 7 Rotate the arrow part of fiber connector counterclockwise and take out the
dust cap.
Pic 8 The arrow part of fiber connector is above, insert fiber connector into the
socket and then rotate the arrow part clockwise.
4. Accessories:
1. Users' Manual*1
2. Accessories Bag*1
3. Pole Ring*2 (Option)