Sola CROSSLINE GREEN NX User manual

CROSSLINE
GREEN NX
Line laser for horizontal and vertical operation
www.sola.at
EN
Operating Instructions

2
Operating Instructions CROSSLINE
GREEN NX Line Laser (Translation of Original Version)
www.sola.at
EN
www.sola.at
About this Manual
Congratulations on the purchase of your new CROSSLINE GREEN NX! You have acquired a SOLA measurement
device, which can make your work easier, faster, and more precise. To utilize the complete functionality range of
this measurement device, and to ensure safe operation, please observe the following instructions:
∙ Please read these operating instructions before commissioning the device.
∙ Always keep the operating instructions near the device.
∙ Only hand over the device to other persons together with the operating instructions.
∙ Never render the attached warning signs unreadable.
Passion for Precision

3
Contents
www.sola.at
EN
1. General Information
2. Delivery Contents and Accessories
3. Description
4. Technical Data
5. Safety Instructions
6. Laser Safety / Classification
7. Getting Started
8. Operation
9. Checking the Leveling Accuracy
10. Maintenance, Storage,
and Transportation
11. Troubleshooting
12. Disposal
13. Manufacturer’s Guarantee
14. EU Declaration of Conformity
Passion for Precision

4
1.1 Signal Words and their Meaning
DANGER
For an imminent danger that could lead to
serious injury or death.
WARNING
For a potentially dangerous situation that
could lead to serious injury or death.
CAUTION
For a potentially dangerous situation
that could lead to minor injury or property
damage.
NOTE
For application notes and other useful
information.
1.2 Pictograms and Other Information
1.2.1 Warning Signs
Warning of dangers in general
1.2.2 Symbols
Read the operating instructions
before use.
Batteries and devices may not
be disposed of with household
waste.
Do not throw the battery
into the fire.
1. General Information
Warning label on packages with
Li-Ion rechargeable batteries.
Do not heat battery above 60°C.
Class 2 laser device
Do not look into the laser beam!
EN
General Information

5
2. Delivery Contents and Accessories
2.1 CROSSLINE GREEN NX
Delivery Contents
11 line laser CROSSLINE GREEN NX
21 battery adapter BA
33 Mignon batteries (AA)
41 wall mount WB
51 case 2.2 Optional Accessories
Receiver REC LGD0
Universal clamp tripod UTC
Telescopic tripod TST
Crank tripod KST
Tripod BST
Compact tripod FST
Threaded adapter set GA-SET
Magnetic target plate ZLM GREEN
REC
LGD0 UTC TST KST BST FST
GA-
SET
ZLM
GREEN FL ML NK!
LB
GREEN
EN
Further information on accessories can be found at
www.sola.at
1
4
3
5
2
Flexi-rod FL
Measuring rod ML
Inclination adapter NK1
Laser visibility glasses, green LB GREEN
Delivery Contents and Accessories

6
1Outlet opening laser radiation
2On/O switch, transport lock
3Status/battery voltage display “BATT-ON”
4H/V button
5Operating mode status “PULSE”
6Tripod screw connection 1/4"
7Battery compartment cover
8Rotatable stand base
3.1 Device Components, Display and
Operating Elements
3. Description
EN
Description
1
3
5
4
7
6
2
8

7
EN
The CROSSLINE GREEN NX is a line laser with which a single
person is able to level and align both horizontally and vertically.
The device is preferably intended for indoor use. For outdoor
applications, care must be taken to ensure that the environmental
conditions correspond to those indoors. The range of the visible la-
ser lines depends on the ambient conditions. The handheld receiver
3.2 Intended Use
can be used to locate the laser lines in poor lighting conditions, or at
greater distances. Follow the instructions contained in this manual.
The device and accessory equipment may present a danger if they
are utilized improperly or inappropriately by persons who are not
instructed as required.
Description

8
4. Technical Data
CROSSLINE GREEN NX
Working range* r = 25 m* (laser line)
r = 80 m* (receiver)
Max. measuring tolerance ±0.2 mm/m (laser lines)
Protection class IP 54
Leveling range (typical) ±4 °
Leveling time (typical) ≤ 5 s
Power supply 3 x 1.5V Mignon (AA) batteries
Operating time (at 20 °C)
Mignon (AA) batteries 8hrs
Operating temperature -10 °C to +50 °C
Storage temperature -20 °C to +60 °C
Laser diodes 510 - 530 nm
Laser class 2, DIN EN 60825-1: 2014
Tripod screw connection ¼"
Weight without rechargeable battery450 g
Dimensions 120 x 65 x 105 mm
EN
* Depending on ambient conditions at the work site.
We reserve the right to make changes (sketches, descriptions and technical data).
Technical Data

9
5.1 Area of Responsibility
5.1.1 Manufacturer
∙ SOLA is responsible for the safe delivery condition of the product,
including the operating instructions and the original accessories.
5.1.2 Operator
∙ The operator is responsible for using the product as intended, the
deployment of personnel, their training, and the operational safety
of the product.
∙ The operator understands the safety information which is stated
on the product and the instructions in the operating instructions.
∙ The operator shall comply with the standard local regulations
relating to safety and accident prevention regulations, as well as
worker protection laws and regulations.
∙ The operator shall immediately notify SOLA if safety-related issues
should arise relating to the product or during its utilization.
∙ The operator shall ensure that the product is not utilized any
further if defects become evident, and they will have the product
repaired professionally.
5.2 Improper Use
∙ Use of the device and the accessories without instruction.
∙ Use of third-party accessories or additional equipment.
∙ Use outside of the intended limits (see Chapter4/Technical Data) .
∙ Use under extreme temperature fluctuations without
adequate acclimatization.
∙ Disabling of safety devices and removal of hazard
notices and labels.
∙ Unauthorized opening of the device.
∙ Performance of modifications or alterations to the device
or the accessories.
∙ Deliberate blinding of third parties.
∙ Inadequate safeguarding at the installation site.
5.3 Utilization Limitations
∙ The CROSSLINE GREEN NX is suitable for continuous use in an
atmosphere which can be inhabited by humans.
∙ Do not operate the product in explosion-prone or corrosive
environments.
5. Safety Instructions
EN
Safety Instructions

10
5.4 Usage Hazards
5.4.1 General
WARNING
Missing or incomplete instructions may result in improper or
incorrect use. This can cause accidents with serious damage to
persons, property, assets, and the environment.
∙Follow the manufacturer’s and operator’s safety instructions.
∙Protect equipment and accessories from being accessed
by children.
WARNING
Blinding by laser radiation can indirectly lead to serious ac-
cidents, especially for people who are driving a vehicle or operat-
ing machinery. Do not look into the laser beam.
∙Do not set up the laser beam and the laser plane at eye level or
directed at people.
CAUTION
A fall, longer storage, transportation, or other mechanical eects
can lead to erroneous measurement results. Check the unit for
damage before use. Do not use damaged equipment.
∙Repairs must only be performed by SOLA.
∙Before using, check the accuracy of the device
(see Chapter9/Checking the Accuracy).
5.4.2 Charger/Batteries/Rechargeable Batteries
DANGER
There is a risk of mortal danger from electric shock.
∙Never open the SOLA Li-Ion charger and charging station.
∙Only use the SOLA Li-Ion charger and charging station in a dry
environment and do not bring them into contact with liquids.
DANGER
Severe mechanical impact can cause batteries and rechargeable
batteries to leak, catch fire or explode, or trigger the release of
toxic substances.
EN
∙Inform the local safety authorities and safety experts before
working in hazardous environments, in close proximity to electrical
installations or similar surroundings.
Safety Instructions